Instruction/ maintenance manual of the product V6 KRK
Go to page of 18
USER GUIDE KRK MODEL V6 VIDEO SHIELDED BI - AMPLIFIED STUDIO MONITOR KRK SYSTEMS, LLC. 5452 BUSINESS DRIVE HUNTINGTON BEACH, CA. 92649 TEL: (714) 373 - 4600 FAX: (714) 373 - 0421 WEB SITE: WWW.
1 Contents Page Introduction/ Features Overview • • • • • • • • • • • • • • • • • • • • 1 System Control • • • • • • • • • • • • • •.
2 System Control INPUT SENSITIVITY Input sensitivity is adjusted (counterclockwise reduces sensitivity) by the SYSTEM GAIN control found on the rear panel. Adjustment range is from - 30dB to +6dB. Factory preset gain is +6dB, which should suffice for most conditions.
3 If the fuses blow immediately upon power up, this indica tes a fault condition and the monitor should be returned to KRK for repair. NEUTRIK ® COMBO CONNECTOR The Neutrik ® Combo connector accommodates ¼” phone plugs, XLR, TRS.
4 Figure 1 Mid - Field Configuration – This configuration is basically the same as the Close - Field set - up. (see Figure 2) It is normally used with larger monitors or when the monitors are too large or heavy for the meter bridge. This set - up has the potential for a larger s weet spot and better spatial imaging.
5 Figure 3.
6 5.1 CHANNEL SURROUND SET - UP Begin set - up by placing the Left and Right front c hannels 30º degrees from the Center channel and equidistant to the listening position ( Figure 4 ). The Left Surround (Rear) and Right Surround (Rear) channels should be placed 110º degrees from the Center channel.
7 when transporting or shipping your V6..
8 Design Goals KRK’s design goal for your V6 was to create a monitor capable of accurately reproducing sound with unsurpassed clarity and accuracy. Other monitors in the marketplace tend to modify, extend, or “tilt” their response above 1 kHz to sound more “spatial, exciting and impressive”.
9 Troubleshooting Problem: If there is no power, check to see if... • The power cord is plugged into both the IEC socket on the rear panel of the unit and into the AC ma ins • The AC mains voltage is matched to the operating voltage requirements (See Changing Voltage in the Connecting the System section on page 3).
10 • Play some non - distorted source material at a low volume. Ca refully cover the tweeter (to block the sound) without touching the diaphragm. Is the woofer producing a clean sound? If there is not a clear tonal quality or any sound at all then the woofer probably needs to be replaced.
11.
12 Specifications THE V6 POWERED STUDIO MONITOR Frequency Response 58Hz - 22kHz ± 2dB High Frequency Driver Shielded 1” (25mm) Silk Soft Dome Low Frequency Driver Shielded 6” (203.
13 KRK and V6 are registered trademarks of KRK Systems, Inc..
14 Safety Instructions: English This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment.
15 Explanation of graphical symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.
16 Consignes de Securite: Francais Ce symbole sert à avertir l’utilisateur que la documentation fournie avec le matérial contient des instructions importantes concernant l’exploi tation et la ma.
17 Explication des symboles graphiques Le symbole “éclair” avec fléche à l’intérieur d’un triangle équilatéral est utilisé pour alerter l’utilisateur de la presence à l’intérieur du coffret de “voltage dangereux” non isolé d’ampleur suffisante pour constituer un risque d’elétrocution.
An important point after buying a device KRK V6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought KRK V6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data KRK V6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, KRK V6 you will learn all the available features of the product, as well as information on its operation. The information that you get KRK V6 will certainly help you make a decision on the purchase.
If you already are a holder of KRK V6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime KRK V6.
However, one of the most important roles played by the user manual is to help in solving problems with KRK V6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device KRK V6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
