Instruction/ maintenance manual of the product V SERIES 2 KRK
Go to page of 8
USER GUIDE KRK V SERIES 2 BI-AMPLIFIED STUDIO MONITOR KRK SYSTEMS LLC. HTTP://WWW .KRKSYS.COM LITK00015.
War ning: T o reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert .
Design Philosophy A studio monitor is really a tool used to aurally “measure” the changes in an audio path. Ask any pro or semi-pro recordist what they think makes a great studio moni- tor and you’ll get basically the same answers: “Accuracy , transparency , flat response, and the truth”.
Back Panel Features (A) SYSTEM GAIN Input sensitivity is adjusted (counter- clockwise reduces sensitivity) through a rear panel mounted trim control. Adjustment range is from -30dB to +6dB. Factory preset gain is +6dB, which should suffice for most condi- tions.
Installing Y our Monitors The close-field monitor , by definition, reduces room interaction. This can be com- pared to the conventional stereo configuration or the large monitor arrangement in a recording studio where sounds emanating from the monitor or reflecting off ceil- ings, walls, and floors greatly affect the sound quality .
5.1 CHANNEL SURROUND SET -UP Begin set-up by placing the Left and Right front channels 30º degrees from the Center channel and equidistant to the listening position (Figure 4). The Left Surround (Rear) and Right Surround (Rear) channels should be placed 1 10º degrees from the Center channel.
Problem: The sound quality changes... • Repeat steps in the previous troubleshooting section above before continuing to the next steps. • Disconnect the signal cable at the input of the monitor . With power on, place your ear close to each driver (tweeter/woofer) and listen for noise (i.
Specifications THE V -SERIES II POWERED STUDIO MONITOR 12 Model Drivers Input T ype Controls Amplification Fusing Frequency Responce Sensitivity (1W@1M) Max SPL (each) Nominal Impedance Max Power hand.
An important point after buying a device KRK V SERIES 2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought KRK V SERIES 2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data KRK V SERIES 2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, KRK V SERIES 2 you will learn all the available features of the product, as well as information on its operation. The information that you get KRK V SERIES 2 will certainly help you make a decision on the purchase.
If you already are a holder of KRK V SERIES 2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime KRK V SERIES 2.
However, one of the most important roles played by the user manual is to help in solving problems with KRK V SERIES 2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device KRK V SERIES 2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
