
Kramer Electronics, Ltd.
Model:
1:2 DVI Distributor


Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups1
that are clearly defined by function.
Thank you for purchasing your Kramer DigiTOOLS® VM-2HDCP 1:2 DVI Distributor.
2 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com
3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com
Introduction

2.1 Quick Start
This quick start chart summarizes the basic setup and operation steps.

Getting Started

The Kramer VM-2HDCP is an HDCP (High-Bandwidth Digital Content Protection)1
compatible 1:2 distribution amplifier for DVI-D (Digital) signals. Since high-resolution DVI signals are very sensitive to cable quality and to PCB layout, the VM-2HDCP uses a uniquely designed PCB which includes all buffering, conditioning and amplifying circuitry to provide two high-level output signals.
In particular, the VM-2HDCP:
block from one of the outputs, so it can then provide the EDID information to the DVI source even if the display device is not connected
3.1 About HDCP
The High-Bandwidth Digital Content Protection (HDCP) standard3
, protects digital video and audio signals transmitted over DVI or HDMI connections between two HDCP-enabled devices to eliminate the reproduction of copyrighted material. To protect copyright holders (such as movie studios) from having their programs copied and shared, the HDCP standard provides for the secure and encrypted transmission of digital signals.
1 Note that Kramer Electronics Limited is an HDCP Licensee, see http://www.digital-cp.com/list/
2 EDID is Extended Display Identification Data
3 Developed by Intel
Overview

3.2 Defining EDID
The Extended Display Identification Data (EDID1
) is a data-structure, provided by a display, to describe its capabilities to the source. The EDID enables the VM-2HDCP to “know” what kind of monitor is connected to the output. The EDID includes the manufacturer’s name, the product type, the timing data supported by the display, the display size, luminance data and (for digital displays only) the pixel mapping data.
3.3 Recommendations for Best Performance

1 Defined by a standard published by the Video Electronics Standards Association (VESA)
Overview

Your VM-2HDCP 1:2 DVI Distributor
Figure 1, Figure 2, Figure 3 and Table 1 define the VM-2HDCP:




Connecting a VM-2HDCP 1:2 DVI Distributor
# Feature Function 1 12V DC +12V DC connector for powering the unit 2 OUTPUT1 DVI Connector Connect to the DVI acceptor 1 3 OUTPUT2 DVI Connector Connect to the DVI acceptor 2 4 INPUT DVI Connector Connects to the DVI source 5 INPUT LED Lights when the input is active; blinks when the input is not valid 6 OUT 1 LED LED lights when OUTPUT 1 is connected and active; LED blinks when selecting the EDID (see section 5.1) 7 OUT 2 LED LED lights when OUTPUT 2 is connected and active; LED blinks when selecting the EDID (see section 5.1) 8 ON LED Lights when the unit is powered 9 EDID Button Press to read the EDID of the selected display (see section 5.1)
To connect the VM-2HDCP as illustrated in the example in Figure 4, do the following:
to one or both DVI acceptors, as follows:
OUTPUT 1 connector to DVI acceptor 1 (for example, a
OUTPUT 2 connector to DVI acceptor 2 (for example, a display)
1 Both outputs do not need to be connected
projector)

Connecting a VM-2HDCP 1:2 DVI Distributor

5.1 Acquiring the EDID
Initially, the VM-2HDCP operates with the factory default EDID1
. This lets you connect the power before connecting either of the acceptors or the source.
You can acquire:
You can also acquire the Clone EDID which copies the EDID data from the acceptor bit-by-bit.
1 The VM-2HDCP reads the EDID, which is stored in the non-volatile memory

Connecting a VM-2HDCP 1:2 DVI Distributor
5.1.1 Acquiring/Changing the EDID
You can work with the default EDID or acquire or change an EDID via one of the connected outputs. Use the EDID Setup button to acquire the output EDID information.
To acquire or change the EDID of a new output display:
In either case, the VM-2HDCP copies the EDID from the display. If no display is connected to the selected DVI output, the default EDID will be chosen.
output is connected, that OUT LED illuminates
5.1.2 Acquiring the Clone EDID
To acquire the Clone EDID, do the following1
:
1 This example refers to OUT 1. The same applies for OUT 2 if the acceptor is connected to OUT 2

Table 2 includes the technical specifications:
of the VM-2HDCP 1:2 DVI Distributor
1 Specifications are subject to change without notice
Technical Specifications

Kramer Electronics (hereafter ) warrants this product free from defects in material and workmanship under the following terms.
HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase.
Only the first purchase customer may enforce this warranty.
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered by the warranty: 1. Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site www.kramerelectronics.com 2. Any product, on which the serial number has been defaced, modified or removed, or on which the WARRANTY VOID
TAMPERED sticker has been torn, 3. Damage, deterioration or malfunction resulting from: i) Accident, misuse, abuse, neglect, fire, water, lightning or other acts of nature ii) Product modification, or failure to follow instructions supplied with the product iii) Repair or attempted repair by anyone not authorized by Kramer iv) Any shipment of the product (claims must be presented to the carrier) v) Removal or installation of the product vi) Any other cause, which does not relate to a product defect vii) Cartons, equipment enclosures, cables or accessories used in conjunction with the product
IF reattached, removed or otherwise interfered with.
WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR
We will pay labor and material expenses for covered items. We will not pay for the following:
1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center. 2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty coverage, and should be included in any shipment of the product. Please also include in any mailing a contact name, company, address, and a description of the problem(s). 3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to the length of this warranty.
The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for:
This warranty gives you specific legal rights, and you may also have other rights, which vary from place to place.
All products returned to Kramer for service must have prior approval. This may be obtained from your dealer. This equipment has been tested to determine compliance with the requirements of:
EN-50081: "Electromagnetic compatibility (EMC); generic emission standard. Residential, commercial and light industry" EN-50082: "Electromagnetic compatibility (EMC) generic immunity standard. Part 1: Residential, commercial and light industry environment". CFR-47: FCC* Rules and Regulations: Part 15: “Radio frequency devices Subpart B Unintentional radiators”
Part 1:
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the equipment. Use the supplied DC power supply to feed power to the machine. Please use recommended interconnection cables to connect the machine to other components.
* FCC and CE approved using STP cable (for twisted pair products)
Kramer

distributors, visit our Web site: www.kramerelectronics.com,
where updates to this user manual may be found. We welcome your questions, comments and feedback.
Safety Warning: Disconnect the unit from the power supply before opening/servicing.

Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.