Page doesn't exist.

Konica Minolta Range7 manual

Instruction/ maintenance manual of the product Range7 Konica Minolta

File size: 2.47 mb
Number of pages: 26

Download as PDF

Go to page of 26

Summary of contents each page of manual

Page 1

Non-contact 3D Digitizer Instruction Manual Read and understand all instructions before using. /.
Page 2

The followin g symbols are used in t his manual to prevent accidents whi ch may occ ur as a result of inc orre ct use of the instr ument. Denotes a sentence regarding a safet y warning or note. Read the sentence carefully to ensure sa fe and correc t use.
Page 3

1 Whenusingt hishandware,thefoll owingpointsmustbest ric tlyobser vedtoensurecor rec tandsafeuse.Af ter youhav ereadthismanual,keepitinasafeplacewh ereitcanb ereferredtoany timeaquesti onar ises.
Page 4

2 Foreword Notes On Use • WeshallguaranteetheRANGE7/5operationat10°Cto40°Cambienttemperatureand65%orlessrelative humidity .EnsurethattheRANGE7/5operatingenvironmentiswithinthisrange.
Page 5

3 <FRONT> <REAR> RANGE7/5 Laser Label Indication W arning and instruction labels about the laser Other warning label.
Page 6

4 About this Manual (Contents) Contents and Descriptions This instruction manual provides the following contents about preparations for use of the RANGE7/5.
Page 7

5 About the RANGE7/5 n System Diagram <RANGE7> Light-receiving lens (TELE, WIDE) KONICA MINOLTA RANGE7 AC adapter AC power cord USB Cable (5m) IF-A22 : Europe only (3m) IF-A18 Marker sheet trial.
Page 8

6 <RANGE5> KONICA MINOLTA RANGE5 USB Cable (5m) IF-A22 : Europe only (3m) IF-A18 Marker sheet trial pack (Marker: 500 pcs) Personal computer (Commercially available) Standard accessories Optiona.
Page 9

7 n Names of Parts and Functions 1) Carrying handle  UsedtoliftorcarrytheRANGE7/5.(BesuretoholdtheRANGE7/5bodywithbothhands.
Page 10

8 n Dimensions 199.6 48.3 ø74.7 ø66 ø 35 ø61.5 9.1 141 387.9 20.8 57.7 57.7 197.7 ø15 9 189.6 292.4 55° 248 1 1 1 (Unit:mm).
Page 11

9 Installation and Setup n Installation This section describes the RANGE7/5 installation procedures and precautions for installation. <Installation procedure> T o install the RANGE7 /5, you can .
Page 12

10 3) Installation using the measuring stand set (under optional accessories) Mount the RANGE7/5 to the measuring stand platform (under optional accessories). NOTE • Before mounting the RANGE7/5, make sure that the measuring stand platform is properly mounted to the measuring stand.
Page 13

11 T o execute measurement using the RANGE7, mount an optimum lens depending on the measuring target size and the measuring distance, and install the RANGE7 at an optimum position relative to the measuring target.
Page 14

12 <Setup procedure> This section describes the procedure for installing the RANGE7/5 properly , and completing the preparations for measurement.
Page 15

13 Changing of Lens (RANGE7 only) Set the RANGE7 at a position proper to the measuring target, and exchange the lens for an optimum one, depending on the measuring target size and the distance between the RANGE7 and the measuring tar get. NOTE When changing the lens, conrm that the lens number is the same number as the RANGE7 body .
Page 16

14 3) Connecting the AC adaptor 1) Connect the AC cable to the AC adaptor for the RANGE7/5. 2) Insert the AC adaptor plug of the dedicated AC adaptor (AC-A324) to the AC adaptor connection terminal on the right of the RANGE7/5 rear panel. 3) Insert the AC cable plug connected to the AC adaptor to a 100 V AC main outlet.
Page 17

15 5) T urning power on/off 1) Push the white power button in the upper right part of the rear panel of the RANGE7/5. A short beep sounds, the power is switched on, and the power button is lit yellow-green. 2) W arming-up of the RANGE7/5 starts when the laser shutter is opened.
Page 18

16 n About Field Calibration Calibration sheet The gure below shows an example of setting up the RANGE7/5 for calibration using the Calibration Set. Enough space is needed to spread out the sheet. 1280×430 mm Set the calibration chart in the position marked on the sheet for the lens being used.
Page 19

17 n Installation and Measurement (Image) Measuring Steps (Images) ExampleofinstallationonMeasuringStandSetRA-A200(optionalaccessory) ExampleofinstallationonT ri.
Page 20

18 n Shooting and Focusing (Image) n Scanning (Image).
Page 21

19 T roubleshooting If you have some problems when using the RANGE7/5, please refer to the following table to check on the situation. The RANGE7/5 operation is controlled by the 3D processing software “RANGE VIEWER”.
Page 22

20 Other Information n Measuring Principles <Basic Principle> TheRANGE7/5usesthelightsectioningmethodtoemitahorizontalstripelightthroughacylindricallenstotheobject.
Page 23

21 n Specications MODEL NAME KONICA MINOL T A RANGE7 Measuring Method T riangulation by light sectioning method Light-Source Semiconductorlaserλ=660nm LaserClassication Class2(IEC60825-1edition2) Sensor Name CMOSPhotodiode Pixel 1.
Page 24

22 MODEL NAME KONICA MINOL T A RANGE5 Measuring Method T riangulation by light sectioning method Light-Source Semiconductorlaserλ=660nm LaserClassication Class2(IEC60825-1edition2) Sensor Name CMOSPhotodiode Pixel 1.
Page 25

.
Page 26

9222-A0V8-49 BCEBPF ©2009-2012 KONICA MINO LT A OPTICS, INC..

Read the Konica Minolta Range7 manual - avoid problems

An important point after buying a device Konica Minolta Range7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:

to know how to properly use the device
to know how to perform maintenance/ periodic checks of correct operation of the product Konica Minolta Range7
to know what to do in case of failure Konica Minolta Range7

If you have not bought Konica Minolta Range7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Konica Minolta Range7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Konica Minolta Range7 you will learn all the available features of the product, as well as information on its operation. The information that you get Konica Minolta Range7 will certainly help you make a decision on the purchase.

If you already are a holder of Konica Minolta Range7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Konica Minolta Range7.

However, one of the most important roles played by the user manual is to help in solving problems with Konica Minolta Range7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Konica Minolta Range7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center

Other manuals from the category Graphics Tablet