Instruction/ maintenance manual of the product ULG300A1 Kompernass
Go to page of 11
K OMPERNASS GMBH BURGSTRASSE 21 · D-44867 BOCHUM www .k omper nass.com ID-Nr .: UL G300A1-04/10-V2 IAN: 61862 A3 Laminator UL G 300 A1 A3 Laminator Operating instructions 6 CV_61862_ULG300A1_LB6.
UL G 300 A1 1 2 4 5 6 7 8 9 0 q w 3 CV_61862_ULG300A1_LB6.qxd 04.01.2011 11:59 Uhr Seite 4.
- 1 - Content Page 1 . Intended use 2 2. Items supplied 2 3. Appliance description 2 4. T echnical Data 2 5. Safety instructions 3 6. Suitable laminating pouches 4 7 . Operating lev els 4 8. Preparing for hot lamination 5 9. Preparing for cold lamination 6 1 0.
- 2 - A3 Laminator 1 . Intended use This laminator is intended ex clusively for use in priva- te households and for the hot and cold lamination of documents printed on paper or cardboard. Additionally , t he documents can be trimmed. It is NO T intended for use with any other materials.
- 3 - Overheating Protection This appliance is fitted with overheating protection. Should the motor become too hot due to ex cessive loading, the appliance switches itself of f automati- cally . In this case, disconnect the plug from the mains pow er socket and wait until the appliance has cooled down to r oom temperature.
- 4 - Risk of fire! • Do not use t he appliance in the vicinity of hot surfaces. • Do not place t he appliance at locations exposed to direct sunlight. This could lead to ov erheating and cause irrepa- rable damage. • Do not leave the appliance unattended when in use.
- 5 - 8. Preparing for hot lamination ➩ Inser t the foil guide rails q in the designated holes on the rear of the laminator . ➩ Fold out the document supports s , so that t he documents can be pulled in straight in to t h e slot for manual foil feed t .
- 6 - 9. Preparing for cold lamination If you hav e previously performed hot lami- nation: Af ter hot laminating, allow the laminator to cool down completely before beginning with cold lamination. Remember , the rollers inside the laminator will still be hot.
- 7 - ➩ If you do not w ant to star t another lamination process, turn the foil thickness switch o to ABS (OFF) and withdraw the plug from the mains pow er socket. 1 1 . Anti-Bloc king Switc h (ABS) At the star t of the lamination process, the pouch may be pulled in at an angle or jam itself inside the appliance.
- 8 - ➩ Then run a sheet of DIN A3 paper , folded in the middle (maximum thickness 1 .0 mm) … • without a laminating pouch and • with the fold firs t … slowly into the slot for manual pouch input t . ➩ Release the sheet as soon as you notice it being pulled in automatically .
- 9 - DES UK L TD T el.: 08 7 1 5000 700 (£ 0. 1 0 / minute) E-Mail: suppor t.uk@k ompernass.com K ompernass Ser vice Ireland T el.: 1 850 930 4 1 2 (0,082 EUR/Min.) Standard call rates apply . Mobile operators may vary . E-Mail: suppor t.ie@k ompernass.
An important point after buying a device Kompernass ULG300A1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kompernass ULG300A1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kompernass ULG300A1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kompernass ULG300A1 you will learn all the available features of the product, as well as information on its operation. The information that you get Kompernass ULG300A1 will certainly help you make a decision on the purchase.
If you already are a holder of Kompernass ULG300A1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kompernass ULG300A1.
However, one of the most important roles played by the user manual is to help in solving problems with Kompernass ULG300A1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kompernass ULG300A1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
