Instruction/ maintenance manual of the product ULG 350 A1 Kompernass
Go to page of 12
K OMPERNASS GMBH BURGSTRASSE 2 1 · D-44867 B OCHUM www .kompernass.com ID-Nr .: UL G350A1-04/1 0-V1 Laminator UL G 350 A1 Laminator Operating instructions 6 CV_54393_ULG350A1_LB6.
UL G 350 A1 1 23 4 56 7 8 9 0 q w CV_54393_ULG350A1_LB6.qxd 15.07.2010 14:14 Uhr Seite 4.
- 1 - Content Page 1 . Intended use 2 2. Items supplied 2 3. Appliance description 2 4. T echnical Data 2 5. Safety instructions 3 6. Suitable laminating pouches 4 7 . Operating lev els 4 8. Preparing for hot lamination 5 9. Preparing for cold lamination 6 1 0.
- 2 - Laminator 1 . Intended use This laminator is intended ex clusively for use in priva- te households and for the hot and cold lamination of documents printed on paper or cardboard. Additionally , the documents can be trimmed. It is NO T intended for use with any other materials.
- 3 - CO Time The C.O. Time (Continuous Operation) details how long an appliance may be used without the motor ov erheating and being damaged. Af ter t he appliance has run for this period it must be switched of f until the motor has cooled itself down.
- 4 - Risk of fire! • Do not use t he appliance in the vicinity of hot surfaces. • Do not place t he appliance at locations exposed to direct sunlight. This could lead to ov erheating and cause irrepa- rable damage. • Do not leave the appliance unattended when in use.
- 5 - 8. Preparing for hot lamination ➩ Inser t the pouch guide q into the holes provided on the rear of the laminator . ➩ If not already done, fold the trimming attach- ment d down. ➩ Pull the document suppor t s out, so that the document can be pulled in straight into the slot for manual pouch input t .
- 6 - 9. Preparing for cold lamination If you hav e previously performed hot lami- nation: Af ter hot laminating, allow the laminator to cool down completely before beginning with cold lamination. Remember , t he rollers inside the laminator will still be hot.
- 7 - ➩ When you hav e slid the laminating pouch several centimetres into the slot t , it will start to be pulled in automatically . Release the laminating pouch as soon as you notice it being pulled in auto- matically . Ensure there is at least 30 cm of open space in front of the laminator .
- 8 - 1 3.Cleaning and car e Potentially fatal electrical shock: • Nev er open the appliance housing. There are no user-ser viceable elements inside. • Nev er submerse the appliance into water or other liquids! Cleaning the housing: Clean the sur face of the housing with a slightly moistened cleaning cloth.
- 9 - 1 6. W arranty and Ser vice The warranty for this appliance is for 3 y ears from the date of purchase. The appliance has been ma- nufactured with care and meticulously e xamined be- fore deliv er y. Please r etain your receipt as pr oof of purchase.
- 10 - IB_54393_ULG350A1_LB6 15.07.2010 15:41 Uhr Seite 10.
An important point after buying a device Kompernass ULG 350 A1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kompernass ULG 350 A1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kompernass ULG 350 A1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kompernass ULG 350 A1 you will learn all the available features of the product, as well as information on its operation. The information that you get Kompernass ULG 350 A1 will certainly help you make a decision on the purchase.
If you already are a holder of Kompernass ULG 350 A1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kompernass ULG 350 A1.
However, one of the most important roles played by the user manual is to help in solving problems with Kompernass ULG 350 A1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kompernass ULG 350 A1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
