Instruction/ maintenance manual of the product KH 2156 Kompernass
Go to page of 26
UNIVERSAL REMO TE CONTR OL K OMPERNASS GMBH BURGSTRASSE 21 ⋅ D-44867 BOCHUM www .k ompernass.com ID-Nr .: KH2156-08/09-V3 UNIVERSAL REMO TE CONTROL Operating manual 3 A 08/2009 KH 2156.
KH 2156.
- 1 - INDEX P A GE Important safety instructions 2 Device summary 3 Initial use 4 Unpacking the device / checking the pack age contents 4 Inser ting the batteries 4 Operating components 5 L CD display.
- 2 - Universal remote control KH2156 Read the oper ating instructions carefully before using the de- vice for the rst time and preserve this booklet for later refer - ence. P ass this manual on to whoever might acquir e the device at a future dat e.
- 3 - Damage to t he device If the device is defectiv e, do not attempt to repair it y our- • self. In case of damage, contact the manufacturer or the manufacturer's service hotline (see W arranty information).
- 4 - Initial use Unpacking the device / checking the pac k age contents Impor tant! K eep the plastic packaging w ell away from small childr en. There is a risk of suocation! Unpack the device and accessories.
- 5 - Note: If no L CD display q is visible check the polarity of the batteries or install new ones. Operating components LCD display The L CD display q is divided into elds. T ext field 2! Here is sho wn the currently selected device, for e xample DVD, TV VCR etc.
- 6 - The standard r eadout of the L CD display q consists of the details for the rele vent device, for e x ample, "T V", the initial for the day of the week and the time of day indicator . Buttons Note: All the functions described here can, of course, only be used if they ar e suppor ted by the device being contr olled.
- 7 - CH +/— buttons u Change the reception channel. MA CRO button i MA CRO button i follo wed by a number button o 1-4 activates a pr eviously sav ed chain of commands.
- 8 - Record/playback buttons f The playback buttons f control de vices such as DVD/CD players and video r ecorders: Recor d Start playbac k Stop Playback/R ecord/Wind P ause playback Wind for ward Re wind Mute switching g Switch sound on/o. V OL+/— buttons h Set volume (V olume).
- 9 -.
- 10 - Code Setup (Progr amming the remote control) 3 P ro gra mmi ng m etho ds a re av aila ble for the re mot e co ntr ol: Progr amming by brand code sear ch, by automatic code search and b y direct code input (manual).
- 11 - 9. If most of the buttons function press the OK button k t o save the setting. In the L CD display q "OK" appears. Now the mode "BRAND CODE" appear s again. 10. If, how ever , none or only a few of the buttons function select with the or button t the next code and test again as described in step 8.
- 12 - 1. Press the device butt on e for the device that is to be con- trolled (i.e. V CR). 2. Switch the device that is to be controlled with the remo te control on. With V CR/DVD/CD de vices please inser t a tape and/or disc. 3. Hold down the S button r for a little longer than 3 sec- onds.
- 13 - Sy s tem-Setup Setting the time The L CD display q show s you the time of day . Y ou set this as follow s: 1. Hold down the S button r for a little longer than 3 seconds. The notice "CODE SETUP" appears. If appo x. 15 seconds passes without an entr y the device exits the menu and returns to the standar d display .
- 14 - Adjust contrast Y ou can set the display's contrast as follow s: 1. Hold down the S button r for a little longer than 3 sec- onds. The notice "CODE SETUP" appears. 2. With the or button t select "SY STEM SETUP" and conrm with the OK button k .
- 15 - Timer Setup The URC oers 2 timer modes, sleep timer and e vent timer . Sleep timer 1. Press the device butt on e for the device that is to be con- trolled (i.e. V CR). 2. Hold down the S button r for a little longer than 3 sec- onds.
- 16 - Tips: 1. P er timer memor y slot a maximum of 14 buttons can be progr ammed. Af ter entr y of t he 14th button the sequence will be automatically saved and "FULL" is sho wn in the L CD display q . 2. In this menu also the device will return to the standar d dis- play af ter appro x.
- 17 - 5. First pr ess the button on the URC that is to be taught. In the L CD display q "LEARNING" appears. The UR C now w aits for the infrar ed signal from the original remote contr ol. Note: Should the notice not change to "LEARNING" y ou have selected a button for which no button code can be taught.
- 18 - T o programme a Macro For Macr o programming pr oceed as follow s: 1. Hold down the S button r for a little longer than 3 sec- onds. The notice "CODE SETUP" appears. 2. With the or button t select "MA CRO SETUP" and conrm with the OK button k .
- 19 - T o delete all Macros T o delete all pre-pr ogrammed Macros pr oceed as follow s: 1. Hold down the S button r for a little longer than 3 sec- onds. The notice "CODE SETUP" appears. 2. With the or button t select "MA CRO SETUP" and conrm with the OK button k .
- 20 - Note: The input of the channel numbers can vary according to the model and brand of the selected devices. If necessary , with multi-digit channel numbers you must r st press the button a .
- 21 - For operation T o operate one of the pr ogrammed devices with the UR C > rst press the corr esponding device button e . Then point the URC to this de vice and press the desired button. Put the number buttons > o ex actly as you do with the original remote contr ol.
- 22 - It is possible that you ar e using the wrong code. Star t the > brand code sear ch, the automatic code search or the di- rect code input (manual). The URC does not change the station on the device. Press the corresponding de vice button > e to set the UR C to the correct mode.
- 23 - Every consumer is legally obliged to surrender batteries/ • recharg eable batteries to a community collection centre in their district or to a dealer . The purpose of this obliga- tion is to ensure that batteries are disposed of in a non- polluting manner .
- 24 - Note : The warranty pr ovisions co ver only material or factor y defects. The warranty pr ovisions do not co ver par ts subject to wear and tear • for damage to break able parts, such as switches or • recharg eable batteries. This product is for priv ate use only and is not intended for commercial use.
An important point after buying a device Kompernass KH 2156 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kompernass KH 2156 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kompernass KH 2156 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kompernass KH 2156 you will learn all the available features of the product, as well as information on its operation. The information that you get Kompernass KH 2156 will certainly help you make a decision on the purchase.
If you already are a holder of Kompernass KH 2156, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kompernass KH 2156.
However, one of the most important roles played by the user manual is to help in solving problems with Kompernass KH 2156. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kompernass KH 2156 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
