Instruction/ maintenance manual of the product XBS444 Kodak
Go to page of 48
© Copyright 2003, Zenith Electronics Corporation Installation and Operating Guide | W arranty Model Number | XBS444 | DVD+Hi-Fi VCR System (Speakers: LHS-C6238T/LHS-C6238W).
2 Safety Precautions This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
INTRODUCTION 3 IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. - All these safety and oper- ating instructions should be read before the product is operated. 2. Keep these instructions. - The safety , operating and use instructions should be retained for future refer- ence.
4 T able of Contents Introduction Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORT ANT SAFETY INSTRUCTIONS . . . . . . . . . . 3 T able of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before Use . . . . .
INTRODUCTION 5 Before Use Playable Discs DVD video discs (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit can play the following: DVD-RW , DVD+RW , Kodak PICTURE CD, and CD-R or CD-RW discs that contain audio titles, MP3, or JPEG files.
6 Before Use (Continued) Precautions Handling the unit Shipping the unit The original shipping carton and packing materials come in handy . For maximum protection, re-pack the unit as it was originally packaged at the factory . Setting up the unit The picture and sound of a nearby TV , VCR, or radio may be distorted during playback.
7 INTRODUCTION Front Panel Control Functions P AUSE/STEP( X X / C C ) Pause playback of a tape or a disc in the DVD or VCR deck temporarily/press repeatedly for frame-by-frame playback. OPEN/CLOSE ( Z Z ) Opens and closes the disc tray . Remote Sensor Point the remote control here.
8 Display Window Indicators MUTE REC COPY CHPTRK TITLE RADIO RPT ALL A B VCR MP3 TV DVD SAP PROG PROLOGIC DIGIT AL PCM PHOTO ST P/SCAN Hi-Fi dts II MUTE indicator MP3 or WMA disc inserted. Indicates current chapter , track number or channel number . Indicates current audio stream.
9 INTRODUCTION Remote Control Button Functions FM/AM VIDEO 1/2 OPEN/CLOSE EJECT MUTE SOUND MODE AUDIO TITLE SUBTITLE ENTER MEMORY RETURN STOP P AUSE/STEP PLA Y BACKW ARD FORW ARD REPEA T A-B REPEA T D.
10 Rear Panel Connections ANTENNA FM GND AM S-VIDEO OUT VIDEO MONITOR COMPONENT VIDEO OUT OUT VIDEO Y Pb Pr AUDIO IN OUT ANTENNA/CABLE 1 L R SPEAKERS FRONT (R 4 ) (R 4 ) REAR CENTER ( 4 ) REAR (L 4 ) FRONT (L 4 ) SUB WOOFER ( 8 ) Do not touch the inner pins of the jacks on the rear panel.
SYSTEM SETUP 11 Connections ips Depending on your TV and other equipment you wish to connect, there are various ways to connect the DVD+Hi-Fi VCR. Use connections described on pages 1 1-13. Please refer to the manuals of your TV , VCR, Stereo System or other devices as necessary to make the best connections.
12 Connections (Continued) Basic TV Connections Make one of the following connections, depending on the capabilities of your existing equipment. RF coaxial connection Connect the ANTENNA/CABLE OUT jack on the DVD+Hi-Fi VCR to the ANTENNA in jack on the TV using the 75-ohm Coaxial Cable supplied (R) .
SYSTEM SETUP 13 Connections (Continued) Accessory Audio/Video (A/V) Connections to DVD+Hi-Fi VCR Connect the VIDEO 1 or VIDEO 2 jacks on the DVD+Hi-Fi VCR to the AUDIO/VIDEO OUT jacks on your accessory component, using the optional audio/video cables.
14 Connections (Continued) Front Speaker (Right) Front Speaker (Left) Center Speaker Rear Speaker (Right Surround) Subwoofer Rear Speaker (Left Surround) ANTENNA FM GND AM S-VIDEO OUT VIDEO MONITOR OU.
SYSTEM SETUP 15 Glossary for Audio Stream & Surround mode Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD and compact discs, etc.
16 On-Screen Display (OSD) Some of these functions appear during VCR operation. ❶❷ ❸ ❹ ❺ ❻❼ ❶ T APE SPEED DISPLA Y Shows the current tape speed. ❷ FUNCTION DISPLA Y Indicates the function in progress. ❸ HI-FI DISPLA Y Indicates the unit is playing back tape recorded in Hi-Fi.
SYSTEM SETUP 17 VCR Operation Setup (Continued) VCR Setup Menu Options 1 1 Press MENU and the MAIN menu will appear . 2 2 Use v v / V V to select the SETUP menu, then press MEMOR Y/ENTER. The SETUP menu will appear . 3 3 Use v v / V V to choose a desired option on the SETUP menu.
18 VCR Operation Setup (Continued) Setting the Clock The DVD+Hi-Fi VCR gives you two ways to set the time and date: the Auto Clock Feature or manually . The Auto Clock feature enables the DVD+Hi-Fi VCR to set up the clock while the DVD+Hi-Fi VCR is turned off.
SYSTEM SETUP 19 DVD Operation Setup General Explanation This manual gives basic instructions for operating the DVD+Hi-Fi VCR . Some DVDs require specific operation or allow only limited operation during playback.
20 DVD Operation Setup (Continued) Initial Settings Y ou can set your own Personal Preferences on the DVD+Hi-Fi VCR. General Operation 1 1 Press SETUP . The Setup menu appears. 2 2 Use 3 3 / 4 4 to select the desired option. The screen will show the current setting for the selected option, as well as alternate setting(s).
SYSTEM SETUP 21 DVD Operation Setup (Continued) 5.1 Speaker Setup Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog Multi- Channel Output. (See “Speaker Setup”, on page 36.
22 DVD Operation Setup (Continued) Parental Control Rating Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc.
OPERA TION 23 VCR Operation Normal Playback Preparation: T urn on the TV . T une the TV to the DVD+Hi-Fi VCR output channel (CH 3 or 4) or set the TV’ s source selector to VIDEO. If a direct VIDEO connection is made between the DVD+ Hi-Fi VCR and the TV , set the TV’ s source selector to VIDEO.
24 VCR Operation (Continued) Normal Recording Preparation: T urn on the power of both the DVD+Hi-Fi VCR and TV . T une the TV to the DVD+Hi-Fi VCR output channel (CH 3 or 4) or set the TV’ s source selector to VIDEO.
OPERA TION 25 1 1 0 0 Use V V to choose the SPEED option. Use b b / B B to choose the desired recording speed (AUTO, SP or SLP). AUTO mode determines how much tape is left and switches speed from SP to SLP , if necessary , to complete recording the program.
26 VCR Operation (Continued) Instant Timer Recording Instant T imer Recording allows you to make a recording easily of a preset length without using the programma- ble timer . Preparation: T urn on the power of both the DVD+Hi-Fi VCR and the TV . Be sure the TV is tuned to the DVD+Hi-Fi VCR output channel (3 or 4).
OPERA TION 27 VCR Operation (Continued) VHS Hi-Fi Stereo System/ MTS Broadcast This DVD+Hi-Fi VCR is equipped with the VHS Hi-Fi audio sound system for recording and playback. The information below gives a brief description of Hi-Fi audio and how to record and play a tape in the Hi-Fi audio mode.
28 VCR Operation (Continued) T ape Counter Memory Feature Real-Time Counter Shows length of tape run in hours, minutes, and seconds. Press CLK/CNT to select the real-time counter display . Every press of CLK/CNT changes the TV screen dis- play as illustrated below .
OPERA TION 29 DVD Operation Playing a DVD Playback Setup T urn on the TV and select the video input source con- nected to the DVD+Hi-Fi VCR. 1 1 Press OPEN/CLOSE ( Z Z ) to open the disc tray . 2 2 Load your chosen disc in the tray , with the label facing up.
30 DVD Operation (Continued) General Features (Continued) Still Picture and Frame-by-Frame Playback 1 Press P AUSE/STEP ( X ) while in playback mode. The DVD+Hi-Fi VCR will go into P AUSE mode. 2 With a DVD, you can advance the picture frame by frame by pressing P AUSE/STEP ( X ) repeatedly on the remote control.
OPERA TION 31 DVD Operation (Continued) General Features (Continued) Marker Search Y ou can start playback from a memorized marker . Up to nine markers can be memorized. To enter a mark, follow these steps. 1 From Playback mode, press MARKER when playback reaches the spot that you want to memorize.
32 Audio CD or MP3/WMA Disc Operation Playing an Audio CD or MP3/WMA Disc The DVD/CD receiver can play MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on right. 1 1 Insert a disc and close the tray .
OPERA TION 33 Audio CD or MP3/WMA Disc Operation (Continued) Pause 1 From Playback mode, press P AUSE/STEP ( X ) during playback. 2 To return to playback, press PLA Y , P AUSE/STEP ( X ) or MEMORY/ENTER again. Moving to another T rack From Playback mode, press BACKW ARD ( .
34 V iewing JPEG files This DVD+Hi-Fi VCR can play discs with JPEG files and Kodak picture CDs. Before playing JPEG files, read the notes on JPEG Files on right. 1 1 Insert a disc and close the tray . The MP3/WMA-JPEG choice menu appears on the TV screen.
OPERA TION 35 Programmed Playback WMA MP3 CD Programmed Playback with Audio CDs and MP3/WMA Discs The Program function enables you to store your favorite tracks from any disc in the player memory . Program can contain 30 tracks. 1 1 From Playback or in the Stop mode, press PRO- GRAM to enter the Program Edit mode.
36 Speaker Setup Adjust the Speaker Setup menu option settings for the built-in 5.1 channel surround decoder . (Also refer to page 14, Speaker Positioning.) 1 1 Select “5.1 Speaker Setup” on the Setup menu using the 3 3 / 4 4 buttons. 2 2 While “5.
OPERA TION 37 Radio Operation Presetting Radio Stations Y ou can preset 30 stations for FM and AM. Before tun- ing, make sure that you have turned down the sound level. 1 1 Press FM/AM on the remote control or on the front panel until the frequency band appears on the display and TV screen.
38 Radio Operation (Continued) T uning Stations Manually 1 1 Press FM/AM on the remote control or on the front panel until the frequency band appears on the display and TV screen. 2 2 Use FM/AM on the remote control or on the front panel to select the desired band.
REFERENCE 39 T roubleshooting Symptom No power . The power is on, but the DVD+Hi-Fi VCR does not work. No picture. No sound. The playback picture is poor . The DVD+Hi-Fi VCR does not start playback. The remote control does not work properly . Cause The power cord is disconnected.
40 T roubleshooting (Continued) Symptom Some channels are skipped over when using CH/TRK ( v / V ) Picture and sound of broadcasting channel are weak or missing. Camcorder image is not shown. Camcorder image via A/V input to DVD+Hi-Fi VCR is not shown on TV screen.
REFERENCE 41 Language Code List Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Albanian 8381 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 A ymara 6588 Azerbaijani 6590 Bashkir 6665 Basq.
42 Country Code List Code Country AD Andorra AE United Arab Emirates AF Afghanistan AG Antigua and Barbuda AI Anguilla AL Albania AM Armenia AN Netherlands Antilles AO Angola AQ Antarctica AR Argentin.
REFERENCE 43 Specifications General Power requirements AC 120V , 60 Hz Power consumption 130W Dimensions (approx.) 430 X 90 X 350 mm (16.9 x 3.5 x 13.8 inches) (w x h x d) W eight (approx.
Specifications (Continued) 44 Speakers Satellite (LHS-C6238T) T ype 1 W ay 1 Speaker Impedance 4 Ω Frequency Response 130 - 20,000 Hz Sound Pressure Level 83 dB/W (1m) Rated Input Power 35W Max Input Power 70W Net Dimensions (W x H x D) 88 x 100 x 95 mm Net Weight 0.
Notes 45.
Notes 46.
Notes 47.
ZENITH ELECTRONICS CORPORA TION Zenith P art No. 206-03968 2000 MILLBROOK DRIVE GS# 3834RH0018R LINCOLNSHIRE, IL 60069 Printed in Indonesia Issue O Z enith will repair or replace y our product, at Z e.
An important point after buying a device Kodak XBS444 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kodak XBS444 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kodak XBS444 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kodak XBS444 you will learn all the available features of the product, as well as information on its operation. The information that you get Kodak XBS444 will certainly help you make a decision on the purchase.
If you already are a holder of Kodak XBS444, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kodak XBS444.
However, one of the most important roles played by the user manual is to help in solving problems with Kodak XBS444. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kodak XBS444 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
