Instruction/ maintenance manual of the product TI-2037 Kodak
Go to page of 4
©Eastman Kodak Company, 2 005 May 2005 • TI-2037 TECHNICAL DATA / PRINTED CIRCUIT BOARD FILM K OD AK PRECISION LINE Contact Film UCA7 —High Comple xity PCB Star ts With the Right Phototools— • Designed for making contact phototo ols from photoplotter output or other line work.
2 KODAK PRECISION LINE Contact Film UCA7 • TI-2037 RECIPR OCIT Y W ith recommended processing, the reciproci ty speed change is negligible (1/3-photographic stop o r less) within exposure range of 1/1000 second to 100 seconds; th ere is no change in contrast.
3 KODAK PRECISION LINE Contact Film UCA7 • TI-2037 DIMENSIONAL STABILITY Dimensional stability is an all-inclusive term. In photography , i t applies to size changes caused by changes in humidity and in temperature, an d by processing and aging.
KODAK PRECISION LINE Contact Film UCA7 Revised 5-05 Printed in U.S.A. KODAK PRECISION LINE Contact Film UCA7 KODAK Publication No. TI-2037 NOTICE : The sensitometric cu rves and data in this publication represent product tested under the condit ions of exposure and processing specified .
An important point after buying a device Kodak TI-2037 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kodak TI-2037 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kodak TI-2037 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kodak TI-2037 you will learn all the available features of the product, as well as information on its operation. The information that you get Kodak TI-2037 will certainly help you make a decision on the purchase.
If you already are a holder of Kodak TI-2037, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kodak TI-2037.
However, one of the most important roles played by the user manual is to help in solving problems with Kodak TI-2037. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kodak TI-2037 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
