Instruction/ maintenance manual of the product E-4028 Kodak
Go to page of 8
©Eastman Kodak Company, 2003 April 2003 • E-402 8 TECHNICAL DATA / COLOR PAPE R K OD AK PR OFESSIONAL ENDURA Metallic P aper p. o. p. t h a t pops K OD AK PR OFESSION AL ENDURA Metallic Paper is a color negati ve paper with a unique metallic appearance.
2 KODAK PROFESSIONAL ENDURA M etallic Paper • E-4028 STORAGE AND HANDLING Store unp rocessed pape r at 13 ° C (55 ° F) or lower in the original sealed package.
KODAK PROF ESSIO NAL EN DUR A Meta llic Pa per • E-40 28 3 Printer Setup K OD AK PR OFESSIONAL ENDURA Metallic P aper is slightly slower than K OD AK PROFESSION AL POR TRA and SUPRA ENDURA Papers. As a starting point, use the same printing times and in clude a dens ity series to d etermine your pref erred exp osure.
4 KODAK PROFESSIONAL ENDURA M etallic Paper • E-4028 are due to diff erences in the color den sity of the print. For example, you have a print with acceptable dens ity, but a magenta balance. When you add mag enta filtration to correct the color balance, the print will become too light, so you must use a longer exposure time.
KODAK PROF ESSIO NAL EN DUR A Meta llic Pa per • E-40 28 5 PROCESS CONTRO L T o produce high- quality color prin ts consistently and with a minimum o f waste, you need to match yo ur process to a standard fo r density , color , and contrast each time yo u proc ess paper.
6 KODAK PROFESSIONAL ENDURA M etallic Paper • E-4028 P OST-PROCESS T REATMENTS Mounting Prints Y ou can mount prints with dry mounting tissue. The temperature acros s the heating platen should be 82 to 93 ° C (180 to 200 ° F). Preheat the co ver sheet that you use ov er the face of th e print to remo ve moisture.
KODAK PROF ESSIO NAL EN DUR A Meta llic Pa per • E-40 28 7 CURVES Charac teristic Curv es 1.0 R G B Status A 0.5 sec. RA-4, 95 ° F (35 ° C), 45 sec. Process: Exposure: Densitometry: 0.0 1.0 4.0 3.0 2.0 1.0 DEN S ITY 2.0 0.0 3.0 LOG EXPOSURE (lux-seconds) Spectral-Dye-Dens ity Curves Yellow Magenta Process: RA-4 700 2.
KODAK PROFESSIONAL ENDURA Metallic Paper New 2-03 Printe d in U.S.A. KODAK PROFESSIONAL ENDURA Meta llic P aper KODAK Publicatio n No. E-4028 MORE INFORMATION K odak has many publications to assi st you wi th infor mation on K o dak products, equipment, and mat erials.
An important point after buying a device Kodak E-4028 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kodak E-4028 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kodak E-4028 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kodak E-4028 you will learn all the available features of the product, as well as information on its operation. The information that you get Kodak E-4028 will certainly help you make a decision on the purchase.
If you already are a holder of Kodak E-4028, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kodak E-4028.
However, one of the most important roles played by the user manual is to help in solving problems with Kodak E-4028. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kodak E-4028 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
