Instruction/ maintenance manual of the product MR1250F Knoll Systems
Go to page of 4
Warranty MR1250f Amplifier Knoll Systems warrants MR1250f amplifiers s old in the USA and Canada by authorized Knoll dealers to be free of de fects in materials and workmanship. This warranty extends for three full years from th e date of purchase by the original consumer.
Important Safety Instructions: Hum and noise In most cases, one of the followi ng suggestions shoul d help you solve a hum noise in your system. Please try these steps in the order shown, proceeding from one step to the next if the prior suggestion does not eliminat e the problem.
Knoll Systems service information Installation Installing the MR1250f shou ld be relatively easy. With a bit of planning, the MR1250f will give trouble free service for years. The MR1250f amplifier does not contain any user servi ceable parts inside. If you suspect a proble m that may req uire serv icing, conta ct us at www.
10. Connect the AC power into an outlet that supplie s at least six amps (750 watts) dedicated to each MR1250f . Caution: Never listen to sound that is distorted. If distorted sound is heard, turn the volume down immediately or speaker and/or amplifier damage could o ccur that is not covered by the warranty.
An important point after buying a device Knoll Systems MR1250F (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Knoll Systems MR1250F yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Knoll Systems MR1250F - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Knoll Systems MR1250F you will learn all the available features of the product, as well as information on its operation. The information that you get Knoll Systems MR1250F will certainly help you make a decision on the purchase.
If you already are a holder of Knoll Systems MR1250F, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Knoll Systems MR1250F.
However, one of the most important roles played by the user manual is to help in solving problems with Knoll Systems MR1250F. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Knoll Systems MR1250F along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
