Instruction/ maintenance manual of the product SC-1 Klipsch
Go to page of 12
8900 Keystone Crossing, Suite 1220 Indianapolis, Indiana 46240 1 . 800 . KLIPSCH • www.klipsch.com Make sure you return your warranty card so that we may keep you up-to-date on new Klipsch products and promo - tions. As always, if you have any questions, contact your local authorized Klipsch dealer .
O w n e r ’ s M a n u a l & W a r r a n t y SP-1, SF-2, SF-1, SB-3, SB-2, SC-1, & SS-1 L O U D S P E A K E R S.
CAUTION: RISK OF ELECTRIC SHOCK! DO NOT OPEN! CAUTION! T o reduce the risk of electric shock and fi r e, do not remove the cover or back plate of this device. There are no user-serviceable parts inside. Refer repairs to a Klipsch authorized service center .
IF YOU PREFER, YOU CAN REGISTER ONLINE AT WWW.KLIPSCH.COM For multiple speaker purchases, please fill out only one warranty card. Name: Street Address: City/State/Zip: Home Phone: W ork Phone: E-mail.
Klipsch Limited Warranty KLIPSCH, L.L.C. (“KLIPSCH”) warrants this product to be free from defects in materials and work- manship (subject to the terms set forth below).
15. Dangerous Entry . Care should be taken that no foreign objects or liquids fall or are spilled inside the device. 16. Damage Requiring Service. The device should be serviced by a Klipsch authorized service center when: -The plug or power supply cord has been damaged.
W e Want Y our Klipsch Product to Look and Sound as Good as When it Left the Factor y . Please Check Promptly for Transit Damage. Each Klipsch product is individually tested for sonic quality and inspected for superior appearance before it leaves the Hope, Arkansas factor y .
Component Specifications SB-2 Sensitivity: 93dB @ 1 watt / 1 meter Bandwidth: 54Hz–20kHz±3dB Nominal Impedance: 8 ohms Crossover Frequency: 2400Hz Power Handling: 85 watts maximum continuous (340 watts peak) Enclosure Type: Bass reflex via wide flare, rear-firing por t Drive Components: T wo-way system using one 1" (2.
Wall Mounting • Install the four rubber stick-on bumpers (one on each corner of the rear panel of the speaker) to provide clearance for the speaker wire between the wall and cabinet.
Connect the SC-1 to the “Center” channel speaker output of your system’s power amplifier . Connect the SS-1 to the “Rear” or “Surround” channel speaker outputs of your system’s power amplifier. When connecting sur r ound speakers to the rear channels of a 5.
T r oubleshooting • If one or both SP-1 subwoofers have little or no output: — Double check your power (AC) and system connections. — Make sure that the power switch on the rear control panels of both units is set to the “ON” or “AUTO” position.
Klipsch Synergy Series Technology The Klipsch Synergy Series is a complete, matched family of high performance loudspeakers that offers superior home theater and two-channel performance.
An important point after buying a device Klipsch SC-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Klipsch SC-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Klipsch SC-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Klipsch SC-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Klipsch SC-1 will certainly help you make a decision on the purchase.
If you already are a holder of Klipsch SC-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Klipsch SC-1.
However, one of the most important roles played by the user manual is to help in solving problems with Klipsch SC-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Klipsch SC-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
