Instruction/ maintenance manual of the product Ultralight 2 Anton/Bauer
Go to page of 10
One W orld. One Smar t Choice . ™ O wner ’ s Manual UL TRALIGHT ® 2 ( UL -2 ) A7595-0085 Rev T ® Approved Copy.
T ABLE OF CONTENTS 1 TO REMOVE HEAD MODULE TO RE-A TT ACH HEAD MODULE TO REMOVE / REPLACE BULB 2 INTRODUCTION OPERA TING IMPORT ANT 3 1/4-20 STUD MOUNT APPLICA TION SHOE MOUNT APPLICA TION 4 ACCESSORI.
1 TO REMOVE HEAD MODULE TO RE-A TT ACH HEAD MODULE TO REMOVE / REPLACE BULB NOTE: Only MR-16 type bulbs should be used with the UL2. 1. Pull out on the Thumb T abs of the Head Module. 2. Swing Hood open. 3. Remove and replace bulb as necessary . 4. Close Head Module, insuring that it “clicks” closed.
INTRODUCTION The Ultralight ® 2 (UL2) is an extremely compact, super lightweight version of the original Ultralight ® system, designed speci fi cally for on-camera lighting applications. The Ultralight 2 incorporates many unique features including: • Included with a AB-60, wide angle bulb.
¼-20 STUD MOUNT APPLICA TION The Ultralight ® 2 is shipped standard with ¼-20 Stud Mount for attaching to the camera handle. T o remove/install a ¼-20 Stud Mount, follow these instructions. 1. With the supplied 5/64 hex wrench, loosen the set scr ew located in the thumbwheel.
ACCESSORIES UL2 WEDGE The UL2 W edge is developed speci fi cally for use with the Anton/Bauer ® Ultralight ® 2 on-camera light. The UL2 W edge provides the Ultralight ® 2 with an additional 20º of down angle lighting for shooting extreme close up camera shots (less than 3 feet).
UL-SOFT BOX The UL-Soft Box mounts easily to any Ultralight ® Head Module to soften and diffuse light output. The UL-Soft Box is collapsible allowing easy storage or can fold and swing away while remaining on the Ultralight ® until needed.
BULB SELECTION AND OPERA TION Bulbs used by the Ultralight ® 2 are T ype MR16, tungsten-halogen bulbs. Spot or fl ood bulbs of any light distribution angle may be used. The Ultralight ® 2 offers the gr eatest versatility with the following low voltage bulbs.
LIMITED W ARRANTY This one (1) year limited warranty for the product speci fi ed in this document (“Product”) is given by Anton/Bauer , Inc. (“Anton/Bauer”), 14 Progr ess Drive, Shelton, Connecticut 06484.
7 Anton/Bauer A Vitec Gr oup brand The following ar e trademarks of Anton/Bauer , Inc.: Anton/Bauer , Anton/Bauer logo and parallelogr am design, Aspekt, A utomatique, Data T ap, DIONIC, Elipz, Egripz.
An important point after buying a device Anton/Bauer Ultralight 2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Anton/Bauer Ultralight 2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Anton/Bauer Ultralight 2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Anton/Bauer Ultralight 2 you will learn all the available features of the product, as well as information on its operation. The information that you get Anton/Bauer Ultralight 2 will certainly help you make a decision on the purchase.
If you already are a holder of Anton/Bauer Ultralight 2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Anton/Bauer Ultralight 2.
However, one of the most important roles played by the user manual is to help in solving problems with Anton/Bauer Ultralight 2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Anton/Bauer Ultralight 2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center