Instruction/ maintenance manual of the product TWIN Anton/Bauer
Go to page of 8
One W orld . One Smar t Choic e . ™ O wner ’ s Manual T WIN A7595-0181 Rev L Simultaneous T wo P osition Charger ® Approved Copy.
T ABLE OF CONTENTS 1 INTRODUCTION ST ANDARD FEA TURES SAFEGUARDS GROUNDING AND EARTHING 2 OPERA TION Self-T est Char ging Applications Three Stage Char ging Methodology 3 OPERA TION CONTINUED Removal .
1 INTRODUCTION The TWIN is a simultaneous T wo Position charger for all Anton/Bauer ® Gold Mount ® Batteries. Its lightweight and small size makes it an ideal char ger for travel. As a simultaneous charger each position operates independently allowing two batteries to char ge at the same time.
2 OPERA TION Self-T est: Upon applying mains power , each TWIN will initiate a self-test mode. This mode is indicated by the LED’ s on the unit. Each position will light the red LED followed by the gr een LED. Upon completion of the self-test, the green status light will light steadily , indicating that the unit is ready for operation.
3 REMOV AL OF AC MAINS POWER Anton/Bauer recommends that batteries r emain on the charger and plugged into AC mains for best r esults. If AC mains power is removed, it is highly recommended that the batteries be r emoved from the char ger , thus avoiding any additional self-discharge by the battery .
4 This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to pr ovide reasonable protection against harmful interfer ence when the equipment is operated in a commercial envir onment.
5 LIMITED W ARRANTY This one (1) year limited warranty for the battery product speci fi ed in this document (“Pr oduct”) is given by Anton/Bauer , Inc.
Anton/Bauer A Vitec Gr oup brand The following ar e trademarks of Anton/Bauer , Inc.: Anton/Bauer , Anton/Bauer logo and parallelogr am design, Aspekt, Automatique , Data T ap, DIONIC, Elipz, Egrip z,.
An important point after buying a device Anton/Bauer TWIN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Anton/Bauer TWIN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Anton/Bauer TWIN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Anton/Bauer TWIN you will learn all the available features of the product, as well as information on its operation. The information that you get Anton/Bauer TWIN will certainly help you make a decision on the purchase.
If you already are a holder of Anton/Bauer TWIN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Anton/Bauer TWIN.
However, one of the most important roles played by the user manual is to help in solving problems with Anton/Bauer TWIN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Anton/Bauer TWIN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
