Instruction/ maintenance manual of the product 2700 Anton/Bauer
Go to page of 16
PowerCharger DUAL and QUAD 2400 and 2700 series OWNER’S MANUAL ®.
TABLE OF CONTENTS INTRODUCT ION ............................................................................................. 1 STANDARD F EATURES ................................................................................. 1 EXPANSION OP TIONS .
1 INTRODUCTION This Anton/Bauer Inte rActive 2000 PowerCharger represents over 25 years of Ant on/Bauer technology and experience in a tota lly new portable power system .
2 EXPANSION OPTIONS The exclusive modular desi gn of the new Anton/B auer InterActive 2000 PowerCharger provides ultimate flexibility for all v ideo operations. Startin g with any base model, a wide range of expansion modul es and upgrad es can be added: diagnosti c/discharge functions, charge position expansi on, and power supply modules.
3 SAFEGUARDS Power Sources: This unit was designed to operate at mains voltages from 90 to 250 Volts AC, 50-60 Hz. Risk of Electrical Shock: Refer servicing to quali fied service personnel. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
4 Software revision, power rating, and m ode l number can be obt ained from the Signat ure Display. Wh en the LCD shows the main display screen, press the TEST button on th e front panel. Charging As with all Anton/B auer chargers, charging with an Int erActive 2000 PowerC harger is fully automatic.
5 Three Stage Charging Methodology In general, the PowerCharger will deliv er a three stage charge routine to each battery. 1. Stage One will deliver a high rate charge matched to the capabilities of th e battery (typi cally a one or two hour ra t e, depending on battery t ype and charger power module rati ng).
6 1 - - - - - - - 2 - - - - - - - NOTE: Anton/ Bauer strongly recomm ends that batteries are kept on t he PowerCharger until ready for use. The Lifesaver mode will keep th em 100% charged and ready for use.
7 LED Indications Each charge position of a PowerCharger and PowerCharger Charge M odule (XM models) has a pair of LEDs (one red, one green) which indicate the status of the batt ery attached to th at position.
8 Priority Battery Function A unique operating feature of all PowerCharg ers allows the operator to select any battery on any charge position as a PRIORI TY BATTERY.
9 The standard test is adequ ate for virtually all conditio ns to verify the capacity o f the battery before taking it into the fiel d. The 24 hour test need only be perform ed on a battery, typical ly an older one (2 years or m ore), which may have exhibited questionable performance.
10 When testing is completed, the LCD Main Display will indicate “TEST DONE”. To display or prin t test resu lts: 1. Press the DISPLAY button on the PowerCharger front panel to scrol l to the Primary Position Display for the battery tested. 2. Press the TEST button.
11 XM CHARGE EXPANSION MODULE The “XM” charge expansion modul es easil y a tt ach to any m odel PowerC harger via the 9- pin D-shell comput er style connector m arked “CHARGE MODULE ACCESSORY”. These economical m odules automa tically expand the PowerCharger’s chargi ng capabilities with additional positions.
12 POWER LOSS MEMORY MODE The PowerCharger features a special Powe r Loss Mem ory or “Power Down” mode. When mains power is interrupted while ba tteries are mounted, the PowerCharger will automatically indicate the charge status o f all batteries until power is restored (up to 16 hours).
13 WARRANTY IMPORTANT: PLEASE MAIL WARRANTY REGISTRATION CARD WITHIN TEN (10) DAYS OF PURCHASE. We must have this card on file at our SERVICE DEPARTMENT to establish this warranty. Pr oper registration will also enable us to provide update inform ation on the Int erActive 2000 PowerCharger bat tery sy stem .
7595-0112 Rev G The power behind the best cameras capturing the best images in the world. sm The following are trademarks of Anton/B auer, Inc.: ACS, ADM, Anton/Ba uer, Anton/Bauer l ogo and parallelo.
An important point after buying a device Anton/Bauer 2700 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Anton/Bauer 2700 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Anton/Bauer 2700 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Anton/Bauer 2700 you will learn all the available features of the product, as well as information on its operation. The information that you get Anton/Bauer 2700 will certainly help you make a decision on the purchase.
If you already are a holder of Anton/Bauer 2700, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Anton/Bauer 2700.
However, one of the most important roles played by the user manual is to help in solving problems with Anton/Bauer 2700. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Anton/Bauer 2700 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
