Instruction/ maintenance manual of the product KSRF42DT KitchenAid
Go to page of 12
42” Built-h i Refrigerator Model KSRF42DT IMPORTANT: Installer: Leave Installation instructions with the Homeowner. Homeowner: Keep Installation Instructions for future reference. Save Installation Instructions tar local electrical inspector’s use.
Before you start... Proper installation is your responsibility. Make sure you have everything necessary for correct installation. It is the responsibility of the installer to comply with the installatron specifications provided. The built-in refrigerator weighs over 400 pounds.
Dimensions for built-in area Width and depth of the built-in area are determined by the type of installation. The built-in refrigerator can be installed with the doors flush with the wall, with the doors protruding from the wall, or with side panels enclosing refrigerator.
Product dimensions Levelers extended l/8” below rollers 24 710” - 23-l/8” b W 23-7/d” - t/ u 82, .lj2” recessed height t I I 4 I back of teftigeralor freezer 90% 41-112” 115% 40-112” 137% 37-114” I refrigeralot- 90% 47-112” 115% 46” 137% 41-114” -See page 5.
Custom door panels, handle inserts and top grille panels Door and top grille panels: Dimensions shown are with routed edges. Routing is required if panels are more than l/4” thick. Freezer door panels b- 16-314”. b I ‘16’ I Door handle inserts Maximum weight of cuslom panels Is 30 pounds.
Product dimensions +I- WY tolerance b-42” protruding door installation Refrigerator m -5132” Side trim L -74 1. Attach three spacers from the miscellaneous parts bag to the top, middle and bottom of each side of the refrigerator. Spacers are required for ventilation.
Electrical requirements Electrical Shock Hazard l Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service technician If you are in doubt as to whether the appliance is properly grounded.
Product support A solid soffit or a wood block is required to prevent the refrigerator from tipping forward after it is installed. Determine what height the refrigerator will be when it is installed to fit opening. Determine the height to the top of the cover at the final installed height you plan to use.
Now start... /II Remove top grille assembly ~ package, literature package and parts bag taped to the refrigerator door and save. Product Damage Do Not lower refrigerator against shipping base when removing the shlpplng base. Lowering the refrigerator against the shipping base could damage the components on the bottom of the refrlgerator.
3-prong grounding type wall receD!acle side trim, 15 Move refrigerator close to final position. Remove w cardboard or plywood from under refrigerator. Plug electrical cord into the grounded outlet. Use the screw from the parts package to install the plug retainer.
rn I Ipi I j 7 Remove end cap from Em miscellaneous parts bag ’ and insert into top of door handle. If you wish to change the door handle insert, slide insert trim into handle. See Custom panel and insert dimensions for exact sizes to cut custom inserts.
If built-in refrigerator does not operate... Check that the circuit breaker is not tripped or fuses blown. Check that power supply cord is plugged into wall receptacle. A more detailed troubleshooting checklist is provided in the Use and Care Guide If you need assistance.
An important point after buying a device KitchenAid KSRF42DT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought KitchenAid KSRF42DT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data KitchenAid KSRF42DT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, KitchenAid KSRF42DT you will learn all the available features of the product, as well as information on its operation. The information that you get KitchenAid KSRF42DT will certainly help you make a decision on the purchase.
If you already are a holder of KitchenAid KSRF42DT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime KitchenAid KSRF42DT.
However, one of the most important roles played by the user manual is to help in solving problems with KitchenAid KSRF42DT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device KitchenAid KSRF42DT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
