Instruction/ maintenance manual of the product KSRF36DT KitchenAid
Go to page of 12
.
Before you start... Proper installation is your responsibility. Make sure you have everything necessary for correct installation. It is the responsibility of the installer to comply with the installation specifications provided. The built-in refrigerator weighs over 400 pounds.
Dimensions for built-in area Width and depth of the built-in area are determined by the type of installation. The built-in refrigerator can be installed with the doors flush with the wall, with the doors protruding from the wall, or with side panels enclosing refrigerator.
Product dimensions Levelers extended l/8” below rollers e r.. top of housing lo ta wlatn u- top of grille 118” min. -with 7-W grille l-118” max. -with 8-113” nrille - -‘-r ” -.
Custom door panels, handle inserts and top grille panels Door and top grille panels: Dimensions shown are with routed edges. Routing is required if panels are more than l/4” thick. Freezer door panels + 14-1/4”-d 34. 6” Door handle inserts Maximum weight of custom panels is 30 pounds.
Side panel requirements +I- l/8” tolerance I t 23-116” depth protruding door inslallafion I 23-716” depth flush door installation I 1 - 36”- p--35-5/15”-d I C > 118” spacer -2 thickness* <’ Kb -I t/ doors t side TV 4 5/32”+ T 3-314” I -m Refrigerator Side trim spacers L Y’ 1.
Electrical requirements Electrical Shock Hazard l Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service technician if you are in doubt as to whether the appliance is properly grounded.
Product support A solid soffit or a wood block is required to prevent the refrigerator from tipping forward after it is installed. An anti-tip bracket is located at the top, center rear of the refrigerator. Determine what height the refrigerator will be when it is installed to fit opening.
Now start... El Remove top grille assembly . package, literature package and parts bag taped to the refrigerator door and save. El Remove the four brackets (2 on each side) that attach ’ shipping base to the bottom of the refrigerator. Discard brackets and shipping base.
‘g%ndbg plug power supply cord 15.1 Move refrigerator close to final position. Remove cardboard or plywood from under refrigerator. Plug electrical cord into the grounded outlet. Use the screw from the parts package to install the plug retainer. Move the refrigerator evenly and straight into the opening.
D-l If you wish to change . the door handle insert, slide insert trim into handle. See Custom panel and insert dimensions for exact sizes to cut custom inserts. Insert end caps into each end of door handle. Replace refrigerator door handle. (Some end caps are attached with screws.
/ . If built-in refrigerator does not operate... Check that the circuit breaker is not tripped or fuses blown. Check that power supply cord is plugged into wall receptacle. A more detailed troubleshooting checklist is provided in the Use and Care Guide.
An important point after buying a device KitchenAid KSRF36DT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought KitchenAid KSRF36DT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data KitchenAid KSRF36DT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, KitchenAid KSRF36DT you will learn all the available features of the product, as well as information on its operation. The information that you get KitchenAid KSRF36DT will certainly help you make a decision on the purchase.
If you already are a holder of KitchenAid KSRF36DT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime KitchenAid KSRF36DT.
However, one of the most important roles played by the user manual is to help in solving problems with KitchenAid KSRF36DT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device KitchenAid KSRF36DT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
