Instruction/ maintenance manual of the product KRSC 9060 KitchenAid
Go to page of 24
KRSC 9010 Instructions for use 5019_715_02010_GB_IFU_SbS.qxp 12-03-2007 9:36 Pagina 1.
5019_715_02010_GB_IFU_SbS.qxp 12-03-2007 9:36 Pagina 2.
Before using the appliance 4 Safeguarding the environment 4 Precautions and general recommendations 6 If the appliance is not going to be used 7 Maintenance and cleaning 8 Storing, freezing and thawin.
• Y our new appliance is designed exclusively for domestic use. T o ensure best use of your appliance, please carefully read the operating instructions which include a description of the product and useful advice. Keep these instructions for future reference.
Declaration of conformity • This appliance has been designed for preserving food and is manufactured in compliance with Regulation (CE) No. 1935/2004.
INST ALLA TION • The appliance must be handled and installed by two or more persons. • Be careful not to damage the floors (e.g. parquet) when moving the appliance. • During installation, make sure the appliance does not damage the power cable. • Make sure the appliance is not near a heat source.
For short vacations • The refrigerator does not have to be disconnected from the power supply if you will be away for less than three weeks. Use up perishable food and freeze other food. • If the appliance has an automatic ice-maker: 1. Switch off the automatic ice-maker .
• Before any cleaning or maintenance operation, always unplug the appliance or disconnect it from the power supply . • P eriodically clean the appliance with a cloth and a solution of lukewarm water and neutral detergent specific for refrigerator interiors.
INTRODUCTION W rap food so that no water , moisture or condensate can enter; this will prevent odours or aromas going from one part to another in the refrigerator , ensuring better preservation of frozen foods. Use plastic containers with hermetic lids, aluminium trays, aluminium foil, plastic film and waterproof plastic wraps.
REFRIGERA TOR COMP ARTMENT A. Inside light B. Inside light C. Adjustable shelf D. Shelf - drawer lid E. Drawer F Crisper G. Crisper adjustment H. Meat / vegetable drawer I. Meat / vegetable drawer adjustment K. Dairy products compartment L. 2-litre door tray with bottle holder M.
11 Compartments ON / OFF , MENU (browse), selection and confirmation buttons 12 3 4 56 1. Freezer compartment temperature control button 2. Refrigerator compartment temperature control button 3. MENU (browse) button 4. Confirmation button 5. Automatic ice maker On/Off button 6.
Functions and settings for the freezer compartment Freezer and/or refrigerator compartment door open “P arty ” function ON Freezer compartment temperature setting Functions and settings for the re.
“ MUL TIFL OW ” is a ventilated airflow system that ensures an even temperature inside the refrigerator compartment. Food can be arranged on any shelf inside the appliance, taking care not to obst.
Removing the freezer compartment baskets 1. Slide the basket out as far as it goes. 2. Lift the front of the basket to release it from the retainer . 3.
Standby This function turns off the refrigerator and freezer compartments. T o activate the standby function, press the button for 3 seconds. T o reset the function, carry out the same procedure until the previously set temperatures are displayed. When the appliance is in standby mode, the light inside the refrigerator compartment is off .
OPTIONAL FUNCTIONS All these functions are activated by pressing the Menu button. Each press of the button corresponds to a function. Press to activate the required function, then confirm with the OK button. P arty mode This function is activated by pressing the menu button until the party mode symbol is displayed.
Ice Mode The function is activated when the symbol is lit. Press the ice mode button to select the symbol corresponding to the type of ice required (cubes or crushed); the symbol will light up.
18 The water filter is located below the freezer compartment door . 1. Locate the water filter cartridge cap in the front base grille below the freezer compartment door . Rotate the cap counterclockwise to a vertical position and pull the cap and filter cartridge out through the base grille.
Before contacting the Customer Care Centre... Operation problems are often due to minor causes that can be found and fixed without using any tools. Noises from the appliance are normal, since the fans and compressors for controlling its operation switch on and off automatically .
If moisture has accumulated: • Make sure the air ducts inside the compartment are not blocked and thus preventing the circulation of air . • Make sure food is properly packaged. Dry any wet food containers before placing them in the appliance. • Make sure the doors are not opened too frequently .
21 If the automatic ice dispenser stops working: • Are the ice cubes stuck because the automatic ice dispenser has not been used for some time? Shake the ice bucket to separate the cubes and increase the holding capacity . It is advisable to throw away the old ice cubes and make new ice.
22 Before contacting the Customer Care Centre: Switch the appliance on again to see if the problem has been solved. If it has not, switch off the appliance again and repeat the operation after one hour .
23 W arning - this appliance must be earthed Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T .A. approved fuse to BS 1362 type and proceed as follows: 1.
5019 715 02010 Printed in Italy n 03/07 GB 5019_715_02010_GB_IFU_SbS.qxp 12-03-2007 9:36 Pagina 24.
An important point after buying a device KitchenAid KRSC 9060 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought KitchenAid KRSC 9060 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data KitchenAid KRSC 9060 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, KitchenAid KRSC 9060 you will learn all the available features of the product, as well as information on its operation. The information that you get KitchenAid KRSC 9060 will certainly help you make a decision on the purchase.
If you already are a holder of KitchenAid KRSC 9060, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime KitchenAid KRSC 9060.
However, one of the most important roles played by the user manual is to help in solving problems with KitchenAid KRSC 9060. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device KitchenAid KRSC 9060 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
