Instruction/ maintenance manual of the product KRFC 9035 KitchenAid
Go to page of 28
Instructions for use.
.
Before using the appliance 4 Protecting the envir onment 4 Precautions and general recommendations 5 Product description 6 T ouch T emperature Controls (select models) 7 W ater Dispenser 8 Use of ice .
• Y our new appliance is designed exclusively for domestic use. T o get the most out of your new appliance, read the user handbook thoroughly . The handbook contains a description of the product and useful tips for storing food. Keep this handbook for future consultation.
5 INST ALLA TION • The appliance must be handled and installed by two or more people. • Be careful not to damage flooring (e.g. parquet) whilst moving the appliance. • During installation, make sure the power cable is not damaged. • Ensure that your appliance is not installed near a heat source.
6 Product description A. Control panel B. Dairy compartment C. Bottle balcony D. Fruits & vegetables crispers E. Dely drawer F . Freezer compartment G.
7 The controls are located at the top front of the refrigerator compartment. Control Initial Control Settings After plugging the refrigerator in, set the controls. • Pressing the or pads adjusts the controls to the desired setting. • The temperature control range for both compartments is 1 through 7 (coldest).
W ater Dispenser If you did not flush the water system when the refrigerator was first installed, dispense water into a container until you draw 8 to 12 L (2 to 3 gal.) or for approximately 6 to 7 minutes after the water begins dispensing and discard.
Automatic Ice Maker Connect the ice maker to the water supply as instructed. Proper water flow and a level refrigerator are essential for optimal ice maker performance. Ice Maker Operation • T o turn on the ice maker , push the metal arm down from locked position.
W ater Filter Removal and Installation If your appliance must be connected to the mains water supply to operate the water dispenser and/or ice maker , it must be a water supply which delivers drinking water only . Ice makers not connected to a mains water supply must be filled with drinking water only .
Shelves • Never attempt to adjust a shelf that is loaded with food. • Ensure the shelf is secure and correctly fitted before placing items on a shelf . Y our refrigerator has either spill guard glass shelves or non- sealed shelves. The spill guard glass shelf shelves have a spill retainer edge which allows for easier cleaning up of spillages.
Crisper drawers The Crisper drawers provide a higher humidity environment for fresh fruit and vegetable storage. Controls The Crisper controls regulate the amount of humidity in the crisper drawer . Slide the control toward the FRUIT setting for produce with outer skins.
Upper wire basket T o remove: • Pull the upper basket out to its full extension and lift out. T o install: • Slide the upper basket into the freezer .
FOOD STORAGE CHART Storage time will vary according to the quality of the food, the type of packaging or wrap used (moisture and vapour proof), and the storage temperature (which should be - 18°C).
Before any cleaning or maintenance operation, unplug the appliance from the mains or disconnect the electrical power supply . P eriodically clean the refrigerator and freezer compartments with a cloth and a solution of lukewarm water and mild detergent.
For short periods • If the period of absence is less than 3 weeks, it will not be necessary to disconnect the appliance from the power supply . Remove all perishable foods and freeze the rest. • If the appliance is fitted with an automatic ice maker: 1.
Before contacting the Customer Care Centre... Operation problems are often due to minor causes that can be found and fixed without using any tools. Noises from the appliance are normal, since the fans and compressors for controlling its operation switch on and off automatically .
T roubleshooting guide/After-sales service 18 If the edges of the refrigerator cabinet, which come in contact with the door seal, are warm to the touch: • This is normal in hot weather and when the compressor is running.
Before contacting The Customer Care Centre: 1. check the “T roubleshooting guide. Y ou may be able to resolve the problem quickly and easily . 2. Switch the appliance off and then on again to see if the problem has been solved. If the problem re occurs, disconnect the appliance from the power supply and wait for about an hour before trying again.
Appliance dimensions 20.
Y our new appliance is a FULL Y FROST FREE model designed exclusively for domestic use, i.e. both refrigerator and freezer compartments are provided with an automatic defrosting function. This manual contains indications and warnings for correct and safe installation of the appliance – please read it carefully before starting any installation.
Installation Freezer Drawer removal T o avoid possible injury , product, or property damage, you will need two people to perform the following instructions. T o Remove: 1. Pull the freezer drawer open to it’s full extension. 2. Pull the upper basket out to full extension and lift out to remove.
Leveling • Do not use power tools when performing the leveling procedure. • T o enhance the appearance and maintain performance, the refrigerator should be level. (side to side) Note Complete any required door reversal, panel installation and/or a water supply connection, before leveling.
Opening and Closing Y our Refrigerator Compartment Y our new refrigerator is uniquely designed with two fresh food doors. Either door can be opened or closed independently of one another . There is a vertically-hinged section (mullion) on the left fresh food door .
Disconnect the appliance from the mains power supply before starting operations. • The ice maker and water circuit must be connected to a water supply of drinkable and/or chemically purified water . • The water connection must be carried out in compliance with local water regulations.
Regulations require that the appliance is earthed. The manufacturer declines all liability for injury to persons or animals and for damage to property resulting from failure to observe this or any other instructions.
.
5019 600 00528 Printed in Italy n 07/13 GB.
An important point after buying a device KitchenAid KRFC 9035 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought KitchenAid KRFC 9035 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data KitchenAid KRFC 9035 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, KitchenAid KRFC 9035 you will learn all the available features of the product, as well as information on its operation. The information that you get KitchenAid KRFC 9035 will certainly help you make a decision on the purchase.
If you already are a holder of KitchenAid KRFC 9035, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime KitchenAid KRFC 9035.
However, one of the most important roles played by the user manual is to help in solving problems with KitchenAid KRFC 9035. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device KitchenAid KRFC 9035 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
