Instruction/ maintenance manual of the product Veris Fusion Remote Black Antec
Go to page of 10
Fusion Remote /Fusion Remote Black User’s Manual Manuel de l’utilisateur Anwenderhandbuch Manuale per l’operatore Manual del usuario পᡅ䂀ᯢ TM Media Components Ё᭛Փ⫼ݞ.
1 At Antec, we continually refine and improve our products to ensure the highest quality. As such, it’s possible that your new case may differ slightly from the description in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct.
2 2. Make sure you have the correct I/O panel for your motherboard. If the panel provided with the case isn’t suitable, please contact your motherboard manufacturer for the correct I/O panel. 3. Line up your motherboard with the standoff holes, and remember which holes are lined up.
3 Motherboard USB Pin Layout Pin Signal Names Pin Signal Names 1 USB Power 1 2 USB Power 2 3 Negative Signal 1 4 Negative Signal 2 5 Positive Signal 1 6 Positive Signal 2 7 Ground 1 8 Ground 2 9 Key (No Connection) 10 Empty Pin 12 10 9 Connecting the IEEE 1394 (FireWire®, i.
4 Pin Assignment for Audio Ports (HDA and AC’97) Pin Signal Names (HDA) Pin Signal Names (AC’97) 1 MIC2 L 1 MIC In 2 AGND 2 GND 3 MIC2 R 3 MIC Power 4 AVCC 4 NC 5 FRO-R 5 Line Out (R) 6 MIC2_JD 6 .
5 c. Navigating iMEDIAN HD Use the 4-way buttons to navigate iMEDIAN HD. Holding the left and right buttons will take you to the “Home” and “Menu” screens d. Local Media Users can easily enjoy music, videos, and pictures on their PC by using just the remote control.
6 Note: The upper 5.25” drive bay is reserved for LCD. Do not mount any device into this bay. 3. Find a 4-pin molex or SATA connector on the power supply and connect it to the power connector on the device.
7 CPU Air Guide The CPU Air Guide should be used to direct fresh air from the rear air intake to the CPU cooler to enhance the CPU cooling. Adjust the CPU Air Guide b y adding or removing stacking sections to best suit different motherboard CPU positions.
8 RM200 1. Application Exit: Close the active window or close iMEDIAN HD [ALT + F4] 2. Power: Turn the PC on/off (Power switch also located on the internal receiver) 3. Record 4. Media Control Group 1: Play/Pause/Stop/Open/Prev/Next/Rew/F.Fwd 5. Mouse/Keyboard: Switch the PAD controller between a mouse and a keyboard 6.
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC customersupport@antec.
An important point after buying a device Antec Veris Fusion Remote Black (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec Veris Fusion Remote Black yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec Veris Fusion Remote Black - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec Veris Fusion Remote Black you will learn all the available features of the product, as well as information on its operation. The information that you get Antec Veris Fusion Remote Black will certainly help you make a decision on the purchase.
If you already are a holder of Antec Veris Fusion Remote Black, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec Veris Fusion Remote Black.
However, one of the most important roles played by the user manual is to help in solving problems with Antec Veris Fusion Remote Black. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec Veris Fusion Remote Black along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
