Instruction/ maintenance manual of the product UCC13# 0761345-15725-1 AP Antec
Go to page of 11
Fusion Remote Max User’s Manual Manuel de l’utilisateur Anwenderhandbuch Manuale per l’operatore Manual del usuario পᡅ䂀ᯢ TM Media Components Ё᭛Փ⫼ݞ.
1 At Antec, we continually refine and improve our products to ensure the highest quality. As such, it’s possible that your new case may differ slightly from the description in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct.
2 1. Lay the case down, with the top open. 2. Make sure you have the correct I/O panel for your motherboard. If the panel provided with the case isn’t suitable, please contact your motherboard manufacturer for the correct I/O panel. 3. Line up your motherboard with the standoff holes, and remember which holes are lined up.
3 the 10-pin connector to the motherboard headers so that the blocked pin fits over the missing header pin. Note : Please check the motherboard manual for the USB header pin layout and make sure it matches the following table.
4 Pin Assignment for Audio Ports (HDA and AC’97) Pin Signal Names (HDA) Pin Signal Names (AC’97) 1 MIC2 L 1 MIC In 2 AGND 2 GND 3 MIC2 R 3 MIC Power 4 AVCC 4 NC 5 FRO-R 5 Line Out (R) 6 MIC2_JD 6 .
5 c. Navigating iMEDIAN HD Use the 4-way buttons to navigate iMEDIAN HD. Holding the left and right buttons will take you to the “Home” and “Menu” screens d. Local Media Users can easily enjoy music, videos, and pictures on their PC by using just the remote control.
6 3. Find a 4-pin molex or SATA connector on the power supply and connect it to the power connector on the device. The Cable Management There is a cable management compartment under the 5.25” flip-up cage. Remove the cage to expose the compartment. Hide or route your excess cables to this compartment.
7 Note : The minimum voltage to start the fan is 5V. We recommend our users to set the fan speed to High if you choose to connect the fan to a fan control device. A fan-controller regulates the fan speed by varying the voltage to it. The voltage may start as low as 4.
8 The Washable Air filters There are two filters located behind the front bezel door. 1. Flip down the front bezel door. 2. Push to release one of the filters from its holding position 3. Wash the filter with water. 4. Insert the filter back to its original position until it clicks.
9 RM200 1. Application Exit: Close the active window or close iMEDIAN HD [ALT + F4] 2. Power: Turn the PC on/off (Power switch also located on the internal receiver) 3. Record 4. Media Control Group 1: Play/Pause/Stop/Open/Prev/Next/Rew/F.Fwd 5. Mouse/Keyboard: Switch the PAD controller between a mouse and a keyboard 6.
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC customersupport@antec.
An important point after buying a device Antec UCC13# 0761345-15725-1 AP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec UCC13# 0761345-15725-1 AP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec UCC13# 0761345-15725-1 AP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec UCC13# 0761345-15725-1 AP you will learn all the available features of the product, as well as information on its operation. The information that you get Antec UCC13# 0761345-15725-1 AP will certainly help you make a decision on the purchase.
If you already are a holder of Antec UCC13# 0761345-15725-1 AP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec UCC13# 0761345-15725-1 AP.
However, one of the most important roles played by the user manual is to help in solving problems with Antec UCC13# 0761345-15725-1 AP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec UCC13# 0761345-15725-1 AP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
