Instruction/ maintenance manual of the product KCDP 9010/I KitchenAid
Go to page of 16
KCDP 9010/I Instructions for use.
.
W arnings 4 Safeguarding the environment 5 Instructions for installation and use 6 Extraction Modes 6 Installation 7 Hood description 11 Functioning 11 Maintenance 12 After-Sales Service 14.
• This appliance should not be used by children or people with limited physical or mental abilities and with no experience or knowledge of its use, unless they are supervised by someone in charge of their safety or who has taught them how to use the appliance.
5 1. P acking The packaging material is entirely recyclable and marked with the recycling symbol . Follow local regulations for scrapping. Keep the packaging materials (plastic bags, polystyrene parts, etc.) out of reach of children, as they are potentially dangerous.
This is an excessively heavy product and the movement and installation of the hood should be done by at least two or more people. Follow the instructions in this manual carefully . All responsibility is denied for problems, damage or fire to the appliance resulting in failure to comply with the instructions in this manual.
ceiling wall side cabinet V enting exhaust pipe passages and side cabinet min. width of hood centre line Cooking surface * Recirculation mode only all measurements in mm The hood comes with plugs suitable for most walls/ceilings.
centre line support bracket hooks bottom fastener locations Ø 8 mm REAR VIEW hooks bottom screw hole (inside the canopy) FRONT VIEW Fig. 4 • Place the lower support bracket on the perforation layout aligning it with the sketched rectangle. Mark the two external holes, then drill the holes.
• The hood has two identical brackets for attaching the chimney . Attach the first bracket ( G – the side with fixing holes facing upwards – see Fig.
10 • Hook the hood onto the lower bracket. • Fit the hood securely to the wall with screws • Connect the venting pipe (V enting pipe and straps are not provided and must be purchased seperately) to the connection ring found above the motor suction unit.
T urn to maximum speed when there is a lot of steam in the kitchen. W e would advise you to turn the extraction on 5 minutes before starting to cook and leave it running after you have finished cooking for about another 15 minutes. 1. ON/OFF light button: press once for a dimmed light, twice for a full light.
12 Always disconnect the power supply before carrying out any kind of maintenance work. Cleaning The hood should be cleaned regularly both inside and out (at least as often as you carry out maintenance on the grease filters). Use a damp cloth with mild cleaning products.
13 Carbon filter (only in recirculation mode) Fig. 12 The Carbon filter absorbs any unpleasant smells produced when cooking. The carbon filter can be washed every two months in hot water with suitable cleaning fluids, or in the dishwasher at 65°C (when washing in the dishwasher , do a full wash without any plates inside).
Before calling Customer Care Centre: 1. See if you can solve the problem yourself with the help of the “T roubleshooting guide”. 2. Switch off the hood for a few minutes and re- start it to see if the problem has cleared itself . 3. If the malfunction persists, call the Customer Care Centre Service.
15 W arning - this appliance must be earthed Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T .A. approved fuse to BS 1362 type and proceed as follows: 1.
5019 718 02007 Printed in Italy n 05/07 GB.
An important point after buying a device KitchenAid KCDP 9010/I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought KitchenAid KCDP 9010/I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data KitchenAid KCDP 9010/I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, KitchenAid KCDP 9010/I you will learn all the available features of the product, as well as information on its operation. The information that you get KitchenAid KCDP 9010/I will certainly help you make a decision on the purchase.
If you already are a holder of KitchenAid KCDP 9010/I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime KitchenAid KCDP 9010/I.
However, one of the most important roles played by the user manual is to help in solving problems with KitchenAid KCDP 9010/I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device KitchenAid KCDP 9010/I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
