Instruction/ maintenance manual of the product 2000495 KitchenAid
Go to page of 12
I(ttchenAiid” Part No. 2000495 Rev. A 42” Built-In Refrigerator IMPORTANT: Installer: Leave Installation Instructions with the Homeowner. Homeowner: Keep Installation Instructions for future reference. Save Installation Instructions for = local electrical inspector’s use.
Before you start... Proper installation is your responsibility. Make sure you have everything necessary for correct installation. It is the responsibility of the installer to comply with the installation specifications provided. The built-in refrtgerator weighs over 500 pounds.
Dimensions for built-in area Personal Injury/Property Damage Hazard . Unit is top-heavy and may tip forward when the doors are opened. l A solid soffit or 2” wood block is required above the refrigerator to prevent tipping during use.
-. Product dimensions Levelers extended l/8” below rollers top of housing to lop of grille - See page 6. 118” min. -with 7-l/2” grille l-1/8” max.
Custom door panels, handle inserts and top grille panels Door and top gn’lle panels: Dimensions shown are with routed edges. Routing is required if panels are more than l/4” thick. Freezer door panels Maximum weight of cuslom panels is 30 pounds. The weight of decorative panels MUST NOT exceed the weights specified for each panel.
-. Product dimensions +/- I/W tolerance protruding door inslallalion 23-7/&T’ depth flush door inslallalion spacers 1. Attach three spacers from the miscellaneous parts bag to the top, middle and bottom of each side of the refrigerator. Spacers are required for ventilation.
Electrical requirements Electrical Shock Hazard l Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service technician If you are in doubt as to whether the appliance is properly grounded.
Product support A solid soffit or a wood block is required to prevent the refrigerator from tipping forward after it is installed. Determine what height the refrigerator will be when it is installed to fit opening. Determine the height to the top of the cover at the final installed height you plan to use.
Now start... Remove top grille assembly package, literature package and parts bag taped to the refrigerator door and save. Product Damage Do Not lower refrigerator against shipping base when removing the shipping base. Lowering the refrigerator against the shipping base could damage the components on the bottom of the refrigerator.
3-prong aroundina tvDe retainer /7 Remove tape from rear n leveling rods. Turn the two leveling rods clockwise using a 5/l 6” socket and ratchet until the cabinet weight is supported by the rear legs. Use l-3/8” open end wrench to lower the front leveling legs until the weight of the cabinet is supported by legs.
set m-l Remove two nuts from one end ot the top panel n frame. Remove end piece. Slide decorative panel into panel frame. Replace end piece using nuts. El Check that . top grille is aligned with top trim on cabinet. Use six screws to tighten top grille frame to retrigarator.
If built-in refrigerator does not operate... Check that the circuit breaker is not tripped or house fuse blown. Check that power supply cord is plugged into wall receptacle. A more detailed troubleshooting checklist is provided in the Use and Care Guide.
An important point after buying a device KitchenAid 2000495 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought KitchenAid 2000495 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data KitchenAid 2000495 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, KitchenAid 2000495 you will learn all the available features of the product, as well as information on its operation. The information that you get KitchenAid 2000495 will certainly help you make a decision on the purchase.
If you already are a holder of KitchenAid 2000495, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime KitchenAid 2000495.
However, one of the most important roles played by the user manual is to help in solving problems with KitchenAid 2000495. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device KitchenAid 2000495 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
