Instruction/ maintenance manual of the product 2000491 KitchenAid
Go to page of 12
Part No. 2000491 Rev. A 36” Built-h Refrigerator IMPORTANT: Installer: Leave Installation Instructions with the Homeowner. Homeowner: Keep Installation Instructions for future reference. Save Installation Instructions for local electrical inspector’s use.
Before you start... Proper installation is your responsibility. Make sure you have everything necessary for correct installation. It is the responsibility of the installer to comply with the installation specifications provided. The built-in refrigerator weighs over 400 pounds.
Dimensions for built-in area Personal Injury/Property Damage Hazard @ Unit is topheavy and may tip fonnrard when the doors are opened. l A solid soffii or 2” wood block is required above the refrigerator to prevent tipping during use.
Product dimensions Levelers extended i/8” below rollers f-See page 6.4 lop of housing lo top of grille l/8” min. -with 7-112” grille 1-118” max.
Custom door panels, handle inserts and top grille panels Door and top grille panels: Dimensions shown are with routed edges. Routing is required if panels are more than l/4” thick. Freezer door panels 14.114”’ 6 I. Maximum weight of custom panels Is 30 pounds.
Side panel requirements +/- I/W tolerance tf 23-118” depth P rotruding door nstallalioq 23-7/W’ depth flush door installation I I v I **pacers 4 I ” 1 1. Attach three spacers from the miscellaneous parts bag to the top, middle and bottom of each side of the refrigerator.
Electrical requirements Electrical Shock Hazard l Improper connectlon of the equipment-grounding conductor can result In a rlsk of electrical shock. Check wlth a qualified electrlcian or service technician if you are in doubt as to whether the appliance Is properly grounded.
Product support A solid soffit or a wood block is required to prevent the refrigerator from tlpping forward after it Is Installed. Determine what height the refrigerator will be when it is installed to fit opening. Determine the’height to the top of the cover at the final installed height you plan to use.
Now start... II Remove top grille assembly . package, literature package and parts bag taped to the refrigerator door and save. Product Damage Do Not lower refrigerator against shipping base when removing the shipping base. Lowerlng the refrigerator agalnst the shlpplng base could damage the components on the bottom of the refrigerator.
3-prong groundmg Plug power supply cord /5 Move refrigerator close to final position. Remove . cardboard or plywood from under refrigerator. Plug electrical cord into the grounded outlet. Use the screw from the parts package to install the plug retainer.
Remove two nuts from one end of the top panel frame. Remove end piece. Slide decorative panel into panel frame. Replace end piece using nuts. (12 Check that . top grille is aligned with top trim on cabinet. Use six1 screws to tighten top grille frame to refrigerator.
If built-in refrigerator does not operate... Check that the circuit breaker is not tripped or house fuse blown. Check that power supply cord is plugged into wall receptacle. A more detailed troubleshooting checklist is provided in the Use and Care Guide.
An important point after buying a device KitchenAid 2000491 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought KitchenAid 2000491 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data KitchenAid 2000491 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, KitchenAid 2000491 you will learn all the available features of the product, as well as information on its operation. The information that you get KitchenAid 2000491 will certainly help you make a decision on the purchase.
If you already are a holder of KitchenAid 2000491, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime KitchenAid 2000491.
However, one of the most important roles played by the user manual is to help in solving problems with KitchenAid 2000491. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device KitchenAid 2000491 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
