Instruction/ maintenance manual of the product KND2410TX Kingston Technology
Go to page of 25
K INGSTON T ECHNOLOGY F AST E THE R X S TACKABLE 8-PORT, 16-PORT, & 24-PORT 10/100TX R ACK -M OUNTABLE DUAL SPEED H UB U SER’S G UIDE M ODEL S: KND810TX KND1610TX KND2410TX.
.
KND2410TX User’s Guide - Rev. A01 Kingston Technology Company Kingston Technology Fast EtheRx Stackable 8-Port, 16-Port, & 24-Port 10/100TX Rack-Mountable Dual Speed Hubs User’s Guide Part No.
Kingston Technology Company KND2410TX User’s Guide - Rev. A01 1. Read all these instructions. 2. Save these instructions for later use. 3. Follow all warnings and instructions marked on the product. 4. Do not use this product near water. 5. This product should be operated from the type of power source indicated on the marking label.
KND2410TX User’s Guide - Rev. A01 Kingston Technology Company Introducti on ...................................................................................... 1 Model Ty pes ...................................................................... 1 Special F eatures .
Kingston Technology Company KND2410TX User’s Guide - Rev. A01 UTP Cable Type ............................................... 11 UTP Cable Wiring ............................................. 11 UTP Cable Wiri ng Standar ds ..........................
Introduction 1 KND2410TX User’s Guide - Rev. A01 Kingston Technology Company Introduction Intended Audience: This manual assumes that the user has a gener al working knowledge of networking principles and is familia r with network system s in general.
2 Special Features Kingston Technology Company KND2410TX User’s Guide - Rev. A01 Special Features • Conform s to IEEE802.3u 100BASE- TX, IEEE802.3i 10BASE-T, and IEEE802.
Front Panel 3 KND2410TX User’s Guide - Rev. A01 Kingston Technology Company Design Features The Fast EtheRx dual-speed hub complies with the full set of repeater basic functions as defined by IEEE802. 3u 100BASE-TX, IEEE802.3i 10BASE-T, and IEEE802.
4 Front Panel Kingston Technology Company KND2410TX User’s Guide - Rev. A01 Hardware Installation Before you begin installing network cab les, please take a few minutes to familiarize yourself with the dual-sp eed hub. See the diagram below: Front Panel Fig.
Front Panel 5 KND2410TX User’s Guide - Rev. A01 Kingston Technology Company 1. Make sure the power is turned on for both the PC and Et heRx hub. 2. Verify that the correct network driv ers have been loaded on the PC. Some network adapters require the drivers to be loaded to establish a pr oper link.
6 Rear Panel Kingston Technology Company KND2410TX User’s Guide - Rev. A01 Rear Panel Fig. 1-3 Rear Panel Power Sw itch The AC Power switch turns the unit ON or OFF. If the PWR LED does not light up once the unit has been turned on, try the procedures below (in the following order): 1.
Rear Panel 7 KND2410TX User’s Guide - Rev. A01 Kingston Technology Company Stack-In / Stack-Out Ports Fig. 1-4 Stacking Configuration The Fast EtheRx stackable hubs use stack ing ports located on the back of the unit to stack up to a maximum of four hubs, using any combination of the KND810TX, KND1610TX, and KND2410TX m odels.
8 Rear Panel Kingston Technology Company KND2410TX User’s Guide - Rev. A01 Speed-Setting Dip Switches The dip switches located on the back of the unit can be used to manually configure ports 7 & 8 (KND810TX & KND1610TX) or port 23 & 24 (KND2410TX) to operate at 10Mbps, 100Mbps , or Auto-negotiation (default).
Appendices 9 KND2410TX User’s Guide - Rev. A01 Kingston Technology Company Appendices.
10 Appendix A Pin Assignments Kingston Technology Company KND2410TX User’s Guide - Rev. A01 Appendix A Pin Assignments UTP Port Pin Assignments UTP Ports use RJ-45 Unshielded Twiste d Pair (UTP) cabling. RJ-45 modular plugs and their pin numbers and wiring a ssignments are listed below.
Appendix B Cabling Guidelines 11 KND2410TX User’s Guide - Rev. A01 Kingston Technology Company Appendix B Cabling Guidelines UTP Cable Type When installing network cables, the fo llowing table shows appropriate cabling guidelines for 100BASE-TX Fast Ethernet architecture.
12 Appendix B Cabling Guidelines Kingston Technology Company KND2410TX User’s Guide - Rev. A01 There are two governmental agencies: the Electronic Industry Association (EIA) and the Telecommunications Industr y Association (TIA), which set the standard for all cable wiring requi rements for commercial buildings.
Appendix B Cabling Guidelines 13 KND2410TX User’s Guide - Rev. A01 Kingston Technology Company UL – The National Electrical Code (NEC ), published by the National Fire Protection Association (NFPA), details advisory safety considerations for electrical wiring.
14 Appendix C Specifications Kingston Technology Company KND2410TX User’s Guide - Rev. A01 Compliance: IEEE802.3u 100BASE-TX Standard IEEE802.3i 10BASE-T Standard IEEE802.
Appendix D Commonl y Asked Questions 15 KND2410TX User’s Guide - Rev. A01 Kingston Technology Company Appendix D Commonly Asked Questions Class I vs. Class II 100BASE-TX Fast Ethernet Repeaters There are currently two classes of Fast Ethernet repeaters, defined as Class I and Class II .
16 Appendix D Comm only Asked Questions Kingston Technology Company KND2410TX User’s Guide - Rev. A01 Category 5 Compliance v s. Category 5 Performance? Having CAT 5 components in your netw ork installation does not necessarily achieve full Category 5 performance.
Appendix E Warranties and Notices 17 KND2410TX User’s Guide - Rev. A01 Kingston Technology Company Limited Warranty Statement KINGSTON TECHNOLOGY COMPANY ("Kingston") warrants that this product is free from defects in m aterial and work manship.
Appendix E Warranties and Notices Kingston Technology Company KND2410TX User’s Guide - Rev. A01 18 Warranty Claim Requirements To obtain warranty service, return the def ective pr oduct, freight pre.
Appendix E Warranties and Notices 19 KND2410TX User’s Guide - Rev. A01 Kingston Technology Company F.C.C. Certification This device has been tested and found to com ply with limits for Class A digital device, pursuant to Part 15 of the FCC Rule s.
An important point after buying a device Kingston Technology KND2410TX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kingston Technology KND2410TX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kingston Technology KND2410TX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kingston Technology KND2410TX you will learn all the available features of the product, as well as information on its operation. The information that you get Kingston Technology KND2410TX will certainly help you make a decision on the purchase.
If you already are a holder of Kingston Technology KND2410TX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kingston Technology KND2410TX.
However, one of the most important roles played by the user manual is to help in solving problems with Kingston Technology KND2410TX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kingston Technology KND2410TX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
