Instruction/ maintenance manual of the product G20 Kidco
Go to page of 10
Safeway TM Gate Model G20 for openings 24 3/4 ” to 43 1/2" wide Optional 24” extension Model G24 for opening 43 1/2" to 66” wide Only one extension recommended per gate User Guide.
FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP THEM FOR FUTURE REFERENCE This gate is designed for children from 6 months to 36 months. Since each child’s skills develop at different ages, these age parameters should be monitored against your child’s own development.
Hinge Side Hardware 2 Hinge bottoms (b) 2 Hinge spindles with locknuts (c) 2 Springs (d) 2 Hinge caps (e) 8 Wood screws (q) 1 Protective plastic cover (r) 4 Expansion screw sockets (f) 4 Expansion scr.
Important. Gate must be installed in a structurally sound opening. Hinge side of gate must be mounted to a rigid surface. Ensure mounting surface (wall, door frame, stairpost etc.) is strong, rigid and has an even surface. If using gate on a stairway, it must be placed either on top stair or on lowest stair at the bottom.
Screw hinge spindles (c) into top and bottom rails of gate section (h) until they are exten- ded equally. These will be adjusted to the correct length at a later stage so do not tighten. Repeat process on gate section (i) using latch spindles (m). Mounting Locking Side Screws provided are for mounting directly into wood.
6 As an added safety measure, a stop pin has been provided. Insert stop pin (s) from behind locking latch bracket into hole oppo-site ope- ning direction. Using 2 screws, screw into upper set of screw holes. Correct width will be reached by adjusting gate sections and all four corner spindles.
Center gate in opening. Gaps on each side should be equal. Min: 1” Max: 3” Place hinge spindles (c) over hinge bottom posts (b), dropping them into place. Adjust latch spindles (m) out until they fit securely into two locking brackets. Latch spindle at top must be adjusted so it clicks under locking latch when in closed position.
1 I I I I I I I I A protective plastic cover (r) is provided for top latch spindle. Cut cover, remove latch spindle and put cover on. Return spindle and adjust to correct length.
To open gate, press down on locking latch with thumb, lift gate and slide out of upper and lower locking brackets. Note. Gate should always be in locked position. If gate is open and excessive pressure is applied, hinge posts are desig- ned to break to prevent structural dama- ge.
KIDCO LIMITED WARRANTY Yo ur Kid Co pro du ct is wa rr an te d to be fr ee fro m man uf a ct ur in g de fe ct s fo r a pe ri od of on e ye ar from da te of pu rc ha se unde r norm al use and in comp li an ce wit h the oper at in g inst ru c- tio ns .
An important point after buying a device Kidco G20 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kidco G20 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kidco G20 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kidco G20 you will learn all the available features of the product, as well as information on its operation. The information that you get Kidco G20 will certainly help you make a decision on the purchase.
If you already are a holder of Kidco G20, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kidco G20.
However, one of the most important roles played by the user manual is to help in solving problems with Kidco G20. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kidco G20 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
