Instruction/ maintenance manual of the product Bicycle Kettler
Go to page of 15
P edelec Operating Instructions P edelec handleiding Pédélec manuel.
2 Introduction ( GB ) Dear Customer , congratulations on the purchase of your new KETTLER Pedelec Cycle. These instructions will help you to operate and maintain your Pedelec. Please read them carefully before using your cyc le and familiarise yourself well with the functioning of the system.
3 Contents Introduction 2 T able of contents 3 General diagram 4 Charging the battery 5 - 6 Operation and control 7 Assistance mode / range 8 T echnical data 9 - 12 Care and maintenance 13 T roubl.
4 P edelec General Diagram Pedelec General Diagram 1. Operating unit 2. Motor unit with power sensor on bottom bracket 3. Batter y 4. Battery lock 5.
5 Charging the Battery Before using it for the first time, the battery must be charged for a t least four hours. When deli- vered, the battery is in the uncharged sta te and is in sleeping mode. The batter y can be charged in any state i.e. at any charge level.
6 Note: 1. The length of the charging process depends on the capacity and the level of the charge. 2. Charge the batter y at room temperature only . As soon as the ambient tempera ture of the batter y is less than 0° or more than 40° the batter y cannot be charged and the charging unit remains in standby mode.
7 Operation and Control Operating Unit The operating unit is for switching the system on and off, selecting the desired assistance level and displaying the amount of charge remaining in the batter y . Switching on Press the Power button on the operating unit on your handlebars.
8 Assistance Mode, Range Selecting degree of assistance With the Mode button on the operating unit you can select one of three different assistance modes at an y time.
9 Motor Bottom-bracket motor Brushless DC motor Power output: 250 W Weight: approx. 3.5 kg Control by means of frictionless magnetic torque sensor Overload When the motor is overloaded, the LEDs o.
10 T echnical Data Battery Batter y power: 260 Wh, 26 V 10 Ah, removable and rechargeable T ype: Panasonic lithium, ions, manganese Model: Li-ion batter y Ni-Li NKY224B01 10 Ah Charging time: approx.
11 T echnical Data Battery Sleeping Mode In its original state and at the first start-up the ba ttery is in sleeping mode. F or this reason the batter y has to be fully charged before it is used for the first time. If the charge level drops below 50% and it is not charged for more than two weeks, it goes into sleeping mode automatically .
12 T echnical Data Charging Unit The charging unit type NKJ38 is supplied with the cyc le. Weight of charging unit: 530 g Power supply: 220 V (50 Hz) AC Power: 62 W A charging unit is supplied with the cyc le. T o charge it, take the unit out of the box and remove the plastic foil.
13 Care and Maintenance Inspection Follow the instructions in the enc losed KETTLER Instructions for Assembly and Operation T yre Pressure The tyre pressure has an important influence on the performance of the Pedelec. T o ensure that the range of the batter y is not a ffected, ensure that the tyre pressure is always between 3 and 4 bar .
14 T roubleshooting Do not attempt to repair the electric drive system, control system or batter y . F or any necessar y service or repair work, always contact your KETTLER dealer who has the necessary informa tion and expertise to carry out repairs.
15 Guarantee / Gener al Notes Battery Batteries are subject to wear and tear . It is therefore normal for the capacity of the batter y to decline with increasing age, use, and frequenc y of charging. For other guarantee provisions, please refer to the KETTLER Instructions for Assembly and Operation.
An important point after buying a device Kettler Bicycle (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kettler Bicycle yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kettler Bicycle - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kettler Bicycle you will learn all the available features of the product, as well as information on its operation. The information that you get Kettler Bicycle will certainly help you make a decision on the purchase.
If you already are a holder of Kettler Bicycle, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kettler Bicycle.
However, one of the most important roles played by the user manual is to help in solving problems with Kettler Bicycle. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kettler Bicycle along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
