Instruction/ maintenance manual of the product LCU-1 Antari Lighting and Effects
Go to page of 8
User Manual for LCU-1 Liquid Control Unit Congratulations on the purchase of your new ANTARI LCU-1 Liquid Control Unit..
2 User Manual Antari LCU-1 Liquid Control Unit Congratulations on the purchase of your new ANTARI LCU-1 Liquid Control Unit. Introduction Thank you for choosing an ANTARI Liquid Control Unit. You now own a rugged and powerful state-of-the-art machine.
3 ♦ Keep this device dry. ♦ For inside use only. Not designed for outside use. ♦ For the 110V models, use 3-prong grounded electrical outlet only. Prior to use take care to determine that the unit is installed at the rated voltage. ♦ Keep Liquid Control Unit upright.
4 Pay attention to all warning labels and instructions printed on the exterior of your ANTARI Liquid Control Unit ♦ Maximum pressure of the pump inside the machine is 7 BAR. ♦ Maximum fog output is 20,000 cubic feet/minute. ♦ Visibility during operation is reduced.
5 FTA-64 FT-4 FTA-664 FT-6 Z-8 LCU-1 Liquid container Z-1200/S-100II/ICE ♦ Remove all packing materials from shipping box. Check that all foam and plastic padding is removed.
6 ♦ Plug power cord into a grounded electrical outlet. If necessary, turn power switch on rear of unit to “ON” position. ♦ To extrude liquid, press the appropriate button on the remote for the desired length of time.
7 through the system to prevent the accumulation of particulate matter in the tube. The recommended cleaning regimen is as follows: 1. While unit is unplugged and clean out debris with vinegar and a pipe cleaner, making sure that the tube is free of clogs.
8 C08LCU1.
An important point after buying a device Antari Lighting and Effects LCU-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antari Lighting and Effects LCU-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antari Lighting and Effects LCU-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antari Lighting and Effects LCU-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Antari Lighting and Effects LCU-1 will certainly help you make a decision on the purchase.
If you already are a holder of Antari Lighting and Effects LCU-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antari Lighting and Effects LCU-1.
However, one of the most important roles played by the user manual is to help in solving problems with Antari Lighting and Effects LCU-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antari Lighting and Effects LCU-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
