Instruction/ maintenance manual of the product Antari M-1 Antari Lighting and Effects
Go to page of 10
User Manual for the Antari M-1 Mobile Fog Machine Congratulations on the purchase of your new ANTARI M-1 Mobile Fog Machine Save and read these instructions Bitte lesen Sie und sichern Sie diese Anweisungen Lisez et Gardez ces instructions © 2007 Antari Lighting and Effects Ltd.
2 INTRODUCTION Thank you for choosing Antari’s M-1 Mobile Fogger. You now own a sturdy and portable state-of-the-art fog machine. Prior to use, we suggest that you carefully read all of the instructions.
3 No user serviceable parts inside. Refer to your Antari dealer or other qualified service personnel. Danger of Burns For adult use only. Fog machine must be installed out of the reach of children. Never leave the unit running unattended. Keep nozzle at least 50 cm (20 in.
4 UNPACKING & INSPECTI ON Open the shipping carton and check that all equipment necessary to operate the system has arrived intact. In addition to this user manual, you should receive the following items: 1. M-1 Mobile fogger 2. 12V – 2.3Ah rechargeable battery 3.
5 1. Lift-up the plate before inserting the battery. 2. Make sure the battery is inserted on the right position (see photo). The green light by the front of the handle will flash when the bu tton is first pressed. This indicates the battery has enough charge to power the M-1.
6 OPERATION To generate smoke, press the button on the front of the M-1 Mobile Fogger’s handle. There are two operation modes that can be selected for the M-1. 1. Operation mode 1. Allows the fog machine to fog as long as the handle’s button or the remote control’s button is pressed down.
7 Installation The M-1 Mobile Fogger can be carried in hand or installed in a fixed location as desired. Wherever the machine is placed, it is important that fog does not shoot directly at any one’s face, at open flames or directly into any heat susceptible material.
8 OPTIONAL REMOTE CONTROL OPERATION There are two optional remote controls designed for the M-1 Mobile Fogger. 1. MCT-1 Timer Remote Control: This remote control is connected via an 8-meter cord. The duration of the fog blast is set at 10 seconds. The interval is controlled by the dial on the remote and is adjustable between 3 and 220 seconds.
9 Do not open the case. There are no user serviceable parts inside. Return the machine to an Antari dealer for service. Performance Notes All fog machines develop condensation around the output nozzle.
10 C08M1.
An important point after buying a device Antari Lighting and Effects Antari M-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antari Lighting and Effects Antari M-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antari Lighting and Effects Antari M-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antari Lighting and Effects Antari M-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Antari Lighting and Effects Antari M-1 will certainly help you make a decision on the purchase.
If you already are a holder of Antari Lighting and Effects Antari M-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antari Lighting and Effects Antari M-1.
However, one of the most important roles played by the user manual is to help in solving problems with Antari Lighting and Effects Antari M-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antari Lighting and Effects Antari M-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
