Instruction/ maintenance manual of the product TK-372G Kenwood
Go to page of 8
TK-272G/372G A Starring Role in Every Situation, Every Application Get a flying start with Kenwood's TK-272G/372G - tough portables that offer top performance, operating ease and versatility.
industrial standards, meeting or exceeding the tough environmental standards used by the U.S. Department of Defense. These radios pass U.S. MIL-STD 810 C/D/E standards covering shock, vibration, humidity, dust, and rain, for reliable performance in even the toughest conditions.
Back To Top User-Friendly Interface An essential part of performance is operating ease. And thanks to a sophisticated ergonomic layout, with carefully arranged controls, these radios are simple for anyone to use.
capabilities. Two-Color LED The two-color LED provides traditional transmit/warning (red), receive (green), and alert (orange) visual indications. This LED is recessed to limit omni-directional visibility to everyone except the radio operator. Back to Top Versatility In a fast-moving world, technology has to remain flexible.
save both time and expense (requires optional programming cable and software). Power Output Settings Programmable power levels provide one of two settings (High/Low) for each of the channels so the radio can be tailored for mixed transmit range requirements.
Other Features ● TIME OUT TIMER ● BATTERY POWER SAVE ● LOW BATTERY ALERT ● MONITOR ● TALK AROUND ● BUSY LED CONTROL ● MULTI-FUNCTION DIAL ● KEY LOCK Specifications TK-272G TK-372G GENERAL Frequency range Type 1 Type 2 Type 3 Type 4 150 ~174 MHz 136 ~150 MHz 450 ~470 MHz 470 ~490MHz 490 ~512 MHz 403 ~430 MHZ Number of Channels Max.
Frequency stability +3 ppm (-22°F ~ +140°F) +2.5 ppm (-22°F ~ +140°F) Dimensions (W x H x D) 2-5/16 x 5- 5/16 x 1- 1/4 in. (58 x 135 x 32 mm) with KNB-14 battery 2-5/16 x 5-5/16 x 1-3/8 in. (58 x 135 x 35 mm) with KNB-15A battery Weight (net) 0.49 lbs.
RF power output (Hi/Low) 5 W/1 W 4 W/1 W Spurious & Harmonics Less than 70 dB Modulation Wide/Narrow 16K Ø F3E/11K Ø F3E 16K Ø F3E/11K Ø F3E FM noise Wide/Narrow 45 dB / 43 dB 45 dB / 40 dB Modulation distortion Less than 5% Less than 5% Kenwood follows a policy of continuous advancement in development.
An important point after buying a device Kenwood TK-372G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood TK-372G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood TK-372G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood TK-372G you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood TK-372G will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood TK-372G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood TK-372G.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood TK-372G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood TK-372G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
