Instruction/ maintenance manual of the product SW-200 Kenwood
Go to page of 5
SW -200 Powered Subwoofer Owner’ s Manual Introduction Congratulations! The Kenwood SW-200 Powered Subwoofer will bring a new level of bass to your stereo system. Installing the sub- woofer isn’t difficult, but please read and follow all of the instructions on these pages to get maximum perfor- mance from your SW-200.
If your receiver or amplifier has no subwoofer pre-amp output: 3. If your receiver or amplifier has a subwoofer pre-amp output: (using the pre-amp output will give you the best performance from your subwoofer) Connecting the SW -200 to your audio system 2 .
Placing your SW-200 Powered Subwoofer is very easy. Because the SW-200 (or any subwoofer) is non- directional (it does not send its soundwaves out in a particular direction), where you place it is not as critical as it is for your left and right speakers.
7. Please read these safety instructions carefully. They can help prevent electrical shock, fire, and damage to the unit. Safety Symbols We’ve placed these safety symbols on the back of electrically-powered units to alert you to the danger of electrical shock.
KENWOOD USA CORPORATION PO Box 22745 Long Beach, California 90801-5745 Printed on recycled paper using 10% post-consumer waste..
An important point after buying a device Kenwood SW-200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood SW-200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood SW-200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood SW-200 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood SW-200 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood SW-200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood SW-200.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood SW-200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood SW-200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
