Instruction/ maintenance manual of the product P-110 Kenwood
Go to page of 8
1 P-110 (En) P-110 TURNT ABLE INSTRUCTION MANUAL KENWOOD CORPORATION B60-4038-08 (K/P/T/M/X) OC 99/12 11 10 9 8 7 6 5 4 3 2 1 98/12 11 10 9 8 7 6.
2 P-110 (En) Caution : Read the pages marked carefully to ensure safe operation. Contents Introduction Your choice of this product indicates that you are a devotee to ex- cellence in sound reproduction. We appreciate your patronage and take pride in the long tradition of quality components that our com- pany represents.
3 P-110 (En) AC voltage selection This unit operates on 110-120 or 220-240 volts AC . The AC volt- age selector switch under the motor pulley cover is set to the voltage that prevails in the area to which the unit is shipped.
4 P-110 (En) Please read all of the safety and operating instructions before operating this appliance. Adhere to all warnings on the appliance and in the instruction manual. Follow all the safety and operating instructions. These safety and operating instructions should be retained for future reference.
5 P-110 (En) 13. Lightning - For added protection for this appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the appliance due to lightning and power-line surges.
6 P-110 (En) Verify that all of the following parts are present before carrying out the assembly procedures. First, set the MM. AMP switch on the bottom according to the type of your amplifier.
7 P-110 (En) ÷ The tonearm automatically re- turns to the arm rest when playback is finished. ÷ The arm elevator rises. 3 Tilt the cueing lever to the rear. ÷ To resume playback, set the cueing lever to front side. Tilt the cueing lever to the rear.
8 P-110 (En) What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or service representative. Remedy Cause Symptom No sound from both left and right chan- nels or one channel.
An important point after buying a device Kenwood P-110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood P-110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood P-110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood P-110 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood P-110 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood P-110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood P-110.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood P-110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood P-110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
