Instruction/ maintenance manual of the product KSS-500 Kenwood
Go to page of 8
Introduction Congratulations! The KSS-500 Home Theater Speaker Package will bring quality sound reproduction to your home theater system. Installing the speakers isn’t difficult, but please read an.
2. Please read these safety instructions carefully. They can help prevent electrical shock, fire, and damage to the unit. Safety symbols We’ve placed these safety symbols on the back of electrically-powered units to alert you to the danger of electrical shock.
3. 7 Do NOT attempt to service this unit. You should take the unit to qualified service personnel for repair when: • Objects have fallen, or liquids have been spilled into the unit. • The unit has been exposed to moisture. • The unit doesn’t appear to oper- ate normally or exhibits a marked change in performance.
Connecting the CFS-200 Fr to your audio system If your receiver or amplifier has a subwoofer pre-amp output: 4. + R – – L + FRONT Receiver or amplifier Front speaker (RIGHT) Front speaker (LEFT).
5. r ont Speakers FROM AMPLIFIER AUTO SHUTOFF ON OFF POWER POWER ON OFF STANDBY RED VOLUME CONTROL LOW PASS CROSSOVER PHASE 80 Hz 100 120 150 50 MAX MIN 60 REV NOM TO SPEAKERS LINE IN L R WARNING : TO.
Connecting the Center and Sur round Speakers to your audio system 6 . Caution: When connecting the speakers to the amplifier or receiver, be sure to always connect the positive (‘+’) termi- nals to each other, and the negative (‘-’) terminals to each other.
Placing the CFS-200 Left and Right Speakers • Place the speakers to each side of your TV screen, near ear level. • For the best stereo effect, place the speakers at least 2 ft from the side of the TV, but not so far from it that the ‘size’ of the sound image is much larger than the size of the TV picture image.
KENWOOD USA CORPORATION PO Box 22745 Long Beach, California 90801-5745 Printed on recycled paper using 10% post-consumer waste. Specifications: CFS-200 Front Speakers Enclosure Acoustic suspension Dr.
An important point after buying a device Kenwood KSS-500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KSS-500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KSS-500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KSS-500 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KSS-500 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KSS-500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KSS-500.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KSS-500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KSS-500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
