Instruction/ maintenance manual of the product KDC-C20V Kenwood
Go to page of 9
© B64-1953-10 (MW) V I D E O CD KDC-C20V VIDEO CD A UT O CHANGER INSTR UCTION MANU AL.
Wa rning / Safety precautions 2 English The marking of products using lasers (Except for some areas) The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is using laser beams that are of a weaker class.
3 Stains, scratches, or warping can cause skipping, malfunction, or low sound quality . T ake the following precautions to avoid damage to the compact discs. •A void touching the recorded side (the side without the titles on) when you hold a compact disc.
Installation 4 English 9 0 0 4 5 Use the holes marked ● to install the unit. Do not tighten the screw B too securely at the time of installation, but tighten it securely after having fixed the bracket A .
5 90 45 0 AUX OFF ON ■ Ve rtical installation A 90 90 0 45 90 0 45 V S Ø4 90 0 45 Angle adjustment switch position C B 90 0 45 A C B V S 90 90 0 45 90 0 45 Ø4 Angle adjustment switch position ■ .
Connections 6 English • Do not connect the changer control cable while the control unit is turned ON. • Be sure to press the reset button after installation. • Do not install an antenna of radio equipment or distribute the antenna cable near the changer output cable, for this could cause malfunction with this unit.
Loading compact discs 7 ' ' O - N O - N ' ' ' Make sure the disc magazine is the right way up with the "disc" logo on the top.Pull the tray out by the projection. Projection " 0 " (EJECT) 1 2 3 4 5 6 T ray Place the disc on the tray with the label facing upwards.
Operation 8 English PROBLEM POSSIBLE CAUSE SOLUTION The disc changer mode cannot be selected. The specified disc does not play , but another one plays instead. The picture and sound skips. The display shows that the changer is being played, but no sound can be heard.
Specifications 9 Specifications subject to change without notice. Laser diode ..................................................................................................GaAlAs ( λ =780 nm) Digital Filter .......................................
An important point after buying a device Kenwood KDC-C20V (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KDC-C20V yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KDC-C20V - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KDC-C20V you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KDC-C20V will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KDC-C20V, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KDC-C20V.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KDC-C20V. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KDC-C20V along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
