Instruction/ maintenance manual of the product KDC-4754SD Kenwood
Go to page of 21
KDC-4754SD KDC-4654SD CD-RECEIVER INSTRUCTION MANUAL CD-RECEIVER BEDIENUNGSANLEITUNG РAДИОПРИЕMНИК С KOMПAKT –ДИСKAMИ ИHCTPУKЦИЯ ПO ЭKCПЛУA T AЦИИ АВТОМАГНІТ.
2 Safety 2 Preparation 4 How to attach/detach the faceplate How to reset your unit Basic operations 5 Getting started 7 Canceling the display demonstration Setting the demonstration mode Adjusting the.
3 ENGLISH Declaration of Conformity with regard to the EMC Directive 2004/108/EC Manufacturer: JVC KENWOOD Corporation 3-12, Moriyacho, Kanagawa-ku, Y okohama- shi, Kanagawa, 221-0022, Japan EU Repres.
4 Preparation How to attach/detach the faceplate 2 1 1 2 Do not expose the faceplate to direct sunlight, excessive heat, or humidity . Also avoid places with too much dust or the possibility of water splashing. Keep the faceplate in its casing while detached.
5 ENGLISH The following indicator lights up when... ST : A stereo broadcast is r eceived (FM). IN : A disc is in the unit. TI : T raffic Information function is turned on. RDS : Radio Data System ser vice is available. For : EQ : [PRESET EQ] is set to an EQ mode other than [NATURAL] .
6 When you press or hold the f ollowing button(s)... Button General operation SRC T urns on. T urns off if pressed and held. Selects the available sources ( TUNER, USB/ iPod, SD , CD , AUX, ST ANDBY ), if the power is turned on. • If the source is ready, playback also starts.
7 ENGLISH Getting started Canceling the display demonstration The display demonstration is always turned on unless you cancel it. When you turn on the power (or after you reset the unit), the display shows: [CANCEL DEMO] [PRESS] [VOLUME KNOB] 1 Press the volume knob.
8 Listening to the radio 1 Press SRC to select “TUNER.” 2 Press repeatedly to select a band (FM1/ FM2/ FM3/ MW/ LW). 3 Press 4 / ¢ to search for a station. Item Selectable setting (Preset: *) PRESET TYPE NORMAL/ NORM *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW).
9 ENGLISH Adjust [SETTINGS] mode settings While listening to the radio... 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [SETTINGS] , then press to enter. 3 Turn the volume knob to make a selection, then press to confirm.
10 Start playing a disc 1 Press SRC to turn on the power. 2 Insert a disc into the loading slot. Playback starts automatically. Start playing a USB device or iPod 1 Press SRC to turn on the power. 2 Connect a USB device or an iPod to the USB terminal.
11 ENGLISH Start playing an SD card 1 Press SRC to turn on the power. 2 Press the release button and detach the faceplate. 3 Insert the SD card into the SD CARD slot until it clicks. (With the label side up and the notched section on the right.) 4 Reattach the faceplate.
12 About compatible iPod/iPhone Made for – iPod touch (1st, 2nd, 3rd, and 4th generation) – iPod classic – iPod with video – iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) – iPhone 4S – iPhone 4 – iPhone 3GS – iPhone 3G – iPhone For the latest compatible list and software version of iPod/iPhone, see: www.
13 ENGLISH Preparation : Make sure [ON] is selected for [BUILT-IN AUX] / [BUILTIN AUX] . (page 7, 8) 3.5 mm stereo mini plug (commercially available) Portable audio device (commercially available) Auxiliary input jack Listening to the other external components 1 Press SRC to select “AUX.
14 [AUDIO CONTROL] / [AUDIO CTRL] : While listening to any source ex cept in ST ANDBY state... Item Selectable setting (Preset: *) EQ PRO BASS ADJUST BASS CTR FRQ/ BASS C FRQ 60/ 80/ 100 */ 200: Selects the center frequency. BASS LEVEL –8 — +8 (Preset: 0): Adjusts the level.
15 ENGLISH [SETTINGS] Item Selectable setting (Preset: *) AUX NAME SET/ AUX NAME AUX */ DVD/ PORTABLE/ GAME/ VIDEO/ TV: Selects the desired name for the connected component. (Selectable only if “AUX” is selected as the source.) CLOCK CLOCK ADJUST/ CLOCK ADJ (For details, see page 7.
16 Troubleshooting Symptom Remedy/Cause Sound cannot be heard. Adjust the volume to the optimum level. / Check the cords and connections. “PROTECT” appears and no operations can be done. Check to be sure the terminals of the speaker leads are covered with insulating tape properly, then reset the unit.
17 ENGLISH Symptom Remedy/Cause “NA DEVICE” appears. Connect a supported USB device, and check the connections. / Check that the supported SD card is inserted. “USB ERROR” appears. Remove the USB device, turn the unit off, then turn it on again.
18 Installation/connection Part list: A F aceplate.............................................................. (×1) B Escutcheon ......................................................... (×1) C Mounting sleeve .....................................
19 ENGLISH Wiring connection REMOTE CONT STEERING WHEEL REMOTE INPUT MUTE P . CONT ANT CONT SW FRONT RL REAR RL REAR/SW Fuse (10 A) Antenna terminal (JASO) Light blue/yellow (Steering remote control w.
20 Installing the unit Removing the unit 2 1 Connect the wiring harness to the unit. Other wiring connection has been completed earlier . (page 19) Before attaching , make sure the direction of the escutcheon is correct. ( Wider hooks on the top side.
21 ENGLISH FM tuner section Frequency range (50 kHz space): 87.5 MHz — 108.0 MH z Usable sensitivity (S/N= 26 dB): 1.0 μV/75 Ω Quieting sensitivity (DIN S/N = 46 dB): 2.
An important point after buying a device Kenwood KDC-4754SD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KDC-4754SD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KDC-4754SD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KDC-4754SD you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KDC-4754SD will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KDC-4754SD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KDC-4754SD.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KDC-4754SD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KDC-4754SD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
