Instruction/ maintenance manual of the product KDC-4027 Kenwood
Go to page of 32
KDC-4027 KDC-4027V KDC-3027A KDC-3027G KDC-308A KDC-308G KDC-F327A KDC-F327G © B64-2673-00 / 00 (EN/E2N) CD-RECEIVER INSTR UCTION MANU AL KDC-4027_3027_308_Cover 03.
— 2 — English Contents Safety precautions ......................3 About RDS ..................................5 About CDs .........................
— 3 — To prevent injury and/or fire, take the following precautions: • Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery or ground wires, make sure to use automotive- grade wires or other wires with an area of 0.
— 4 — English • If you experience problems during installation, consult your Kenwood dealer . • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer .
— 5 — About CDs About RDS RDS (Radio Data System) When listening to an RDS station, the programme service name of the station is displayed, advising you quickly which station is being received. RDS (Radio Data System) stations also transmit alternative frequency data for the same station.
Increasing V olume Press the [ u ] button. Decreasing V olume Press the [ d ] button. V olume Press the [SRC] button. Source required Display T uner "TUNER" CD "CD" External disc &.
1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [AUD] button for at least 1 second. 3 Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the button is pressed the items that can be adjusted switch as shown below .
In CD & External disc source Information Display T rack T ime Disc name* "DNPS" Disc title* "D-TITLE" T rack title* "T -TITLE" Clock *: Function of the KDC-4027/KDC-4027V <In External disc control mode>. The faceplate of the unit can be detached and taken with you, helping to deter theft.
T uner features 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses.
Putting a station with good reception in the memory automatically . 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 3 Select the Auto Memory Entry mode Press the [FM] or [AM] button.
RDS features Calling up the stations in the memory . 1 Select the band Press the [FM] or [AM] button. 2 Call up the station Press the [1] — [6] button. Preset T uning — 11 — VOL ADJ SCRL SCAN AUD TI RDM REP M.RDM CLK MENU OFF PTY LOUD 1 - 6 AM FM/ PTY ¢ 4 CLK TI/ VOL ADJ TI indicator RDS indicator PTY indicator KDC-4027_3027_308_U.
Selecting the Program T ype and searching for a station. 1 Enter PTY mode Press the [PTY] button for at least 1 second. During PTY mode the "PTY" indicator is ON. This function can't be used during a traffic bulletin or AM reception. 2 Select the Program T ype Press the [FM] or [AM] button.
Selecting the Program T ype display language. 1 Enter PTY mode Refer to <PTY (Program T ype)> (page 12). 2 Enter Changing Language mode Press the [CLK] button. 3 Select the language Press the [1] — [3] button. Button Language [1] English [2] French [3] German 4 Exit Changing Language mode Press the [CLK] button.
Function of the KDC-4027/KDC-4027V Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display Disc player "CD-2" CD player "DISC" CD changer/ MD changer • Disc No.
Playing all the songs on the disc in random order . Press the [RDM] button. Each time the button is pressed Random Play turns ON or OFF . When it's ON, "RDM ON" is displayed. When the [ ¢ ] button is pressed, the next song select starts.
6 Select the characters Press the [FM] or [AM] button. 7 Repeat steps 5 through 6 and attach a name. 8 Exit Menu mode Press the [MENU] button. • When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes.
Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second.
Function of the KDC-4027/KDC-4027V Selecting the button illumination color as green or red. Display Setting "COL GRN" The illumination color is green. "COL RED" The illumination color is red. Selectable Illumination A red indicator will blink on the unit after the faceplate is removed, warning potential thieves.
For the operation method refer to <Auto Memory Entry> (page 10). Auto Memory Entry <In T uner mode> Sets the tuning mode. T uning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. Preset station seek "AUTO 2" Search in order of the stations in the Preset memory .
Function of the KDC-4027/KDC-4027V Setting the displayed text scroll. Display Setting "SCL MANU" Doesn't scroll. "SCL AUTO" Scrolls when the display changes.
Setting the timer to turn this unit's power OFF automatically when Standby mode continues. Using this setting can save the vehicle's battery power . Display Setting "OFF – – –" Power OFF T imer function is OFF . "OFF 20M" T urns the power OFF after 20 minutes.
English — 22 — The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. ..........................................1 ......................
— 23 — 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 P.CONT ANT.CONT REAR L R REMO.CONT TEL MUTE Rear right output (Red) 4 10 Rear left output (White) Connector Function Guide Pin Numbers for ISO Connectors Wir.
English — 24 — Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
— 25 — ■ Removing the hard rubber frame 2 When the lower level is removed, remove the upper two locations. The frame can be removed from the top side in the same manner . Catch Lock 1 Engage the catch pins on the removal tool and remove the two locks on the lower level.
— 26 — English Tr oubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn ON.
— 27 — Disc source ? "AUX" is displayed without achieving External disc control mode. 50 ✔ Unsupported disc changer is connected. 51 ☞ Use the disc changer mentioned in the IMPORT ANT INFORMA TION of the section on <Safety precautions> (page 3).
— 28 — English The messages shown below display your systems condition. EJECT : No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. E01 ➪ Load the disc magazine properly . No CD in the unit. ➪ Insert the CD.
— 29 — Specifications FM tuner section Frequency range (50 kHz space) ..............87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) ................................. 0.7 µV/75 Ω Quieting Sensitivity (S/N = 46dB) .........................
KDC-4027_3027_308_U.S 2003.10.07 04:46 PM Page 30.
KDC-4027_3027_308_U.S 2003.10.07 04:46 PM Page 31.
KDC-4027_3027_308_U.S 2003.10.07 04:46 PM Page 32.
An important point after buying a device Kenwood KDC-4027 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KDC-4027 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KDC-4027 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KDC-4027 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KDC-4027 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KDC-4027, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KDC-4027.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KDC-4027. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KDC-4027 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
