Instruction/ maintenance manual of the product KAC-X811D Kenwood
Go to page of 10
KA C-X811D KA C-PS811D SUBWOOFER PO WER AMPLIFIER 7 page 2-9 INSTR UCTION MANU AL © B64-2794-00/00 (MV) 3.KAC-X811D_M_1US.indd 04.1.9, 2:17 PM 1.
2 English Sa fety pre cautions 2 W ARNING T o prevent injury or fire, take the following precautions: • When extending the ignition, batter y, or ground wires, mak e sure to use automotive- grade wires or other wires with a 8 mm² (A WG 8) or more to prevent wire deterioration and damage to the wire coating.
English 3 .
4 English � Connection CENTER UNIT (CD receiver , etc.
English 5 Controls 1 Fuse (25 A × 3) 2 Battery terminal 3 Ground terminal 4 Pow er control terminal Controls the unit ON/OFF . NOTE Controls the unit power .
6 English .
English 7 Con trol an Amp from Center Unit Y ou can control the sound by controlling amplifiers from the Center Unit. 1 Enter AMP Control mode Select the AMP Control mode by following the ' AMP Control' procedure given on the Operation Manual of the Center Unit.
8 English The acoustic properties of vehicle compartment tend to cause oscillation due to resonance or unclearness of sound due to standing waves at certain frequencies.
English 9 Specifications Specifications subject to change without notice. Audio Section ......................................................................................................................................... KAC-X811D RMS Power Output (+B = 14.
3.KAC-X811D_M_1US.indd 04.1.9, 2:18 PM 10.
An important point after buying a device Kenwood KAC-X811D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KAC-X811D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KAC-X811D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KAC-X811D you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KAC-X811D will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KAC-X811D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KAC-X811D.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KAC-X811D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KAC-X811D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
