Instruction/ maintenance manual of the product H2EV Kenwood
Go to page of 17
SYSTEM-H2EV Operating Instructions and Installation Manual KEN.4061 ReceiverCarHome Manual 11/18/04 12:46 PM Page 1.
SYSTEM-H2EV P ackag e Contents Unpack y our Here 2 Ever ywhere car kit and mak e sure that ev er ything listed here is present: 1. Here 2 Ever yw here portable tuner 2. Remote control 3. 2 x AAA batteries 4. Car Docking Cradle 5. Cigarette lighter adapter 6.
5 the proper rating. Using a fuse with the wrong rating ma y cause the unit to malfunction. • T o prev ent a shor t circuit w hen replacing a fuse, first disconnect the wiring harness. • When drilling holes to mount the unit, mak e sure not to damage wiring or other systems that ma y be close to the mounting surface.
Option 1: W indshield Mount • Do not install Here 2 Ever yw here on the windshield if it ma y obstr uct y our view w hile driving . • Attach the Car Docking Cradle to the Car Windshield Docking Base using the four enclosed screws. • Loosen the base nut on the Car Windshield Docking Base so that the suction cup portion rotates easily .
9 Step 3: Connecting Audio Y ou hav e two options to connect audio to Here 2 Ever yw here in y our vehicle: • FM Station: T une your v ehicle radio to an unused FM station, and using the Menu option on the Here 2 Ever yw here, select the same station.
11 Installation in a Home Note: Do not put the Here 2 Ev er ywhere in the Home Docking Station until y ou hav e completed the installation. 1. Plug the audio cable’ s mini connector into the back of the cradle, as shown. 2. Plug the audio cable’ s white (L ch.
13 Use this map as a general placement guideline— some experimentation ma y be needed to obtain the best reception in y our par ticular situation. See pg. 27, Antenna Aiming , for more infor mation about using the ANTENNA SIGNAL screen to aim the antenna.
15 P . T une Key: Switches back and forth betw een Preset T une Mode and Channel T une Mode. Back Key: Return to the most recently tuned channel (previous channel). Memo Key: Sa ves song and artist infor mation. Installing Batteries in the Remote Note: Do not expose the remote control to high temperatures or direct sunlight.
Basic Oper ation After y ou hav e activated y our SIRIUS subscription, the Default Displa y screen will appear (see abov e). The Default Displa y screen has two font sizes: Medium and Large (medium is sho wn abov e). Y ou can change font sizes by pressing the Displa y button.
19 2. Use the Control Knob (or the remote CH buttons) to mov e through the list of channels. 3. When the selection y ou want is highlighted, press the Control Knob (or the remote Select button) to pla y the channel. The display will automatically return to the Default Display screen.
21 T uning Only to Preset Channels (Preset T une Mode) Y ou can limit tuning to only the channels y ou hav e stored as Presets. Hold the Band button for at least 1 second (or press the P . T une button on the remote) to enter the Preset T une Mode. The displa y will chang e to highlight the active channel and the current Preset band.
23 erased by a ne wer song w hen y ou press the Menu button. Note that it can be erased with the Clear All Memor y or Factor y Defaults commands, howe ver . Delete: This selection will remove this artist/ song title pair from the memor y list. The other pairs in the memor y list will remain.
25 • Frequency • FM On/ Off The Frequency submenu allows y ou to select an unused FM channel frequency . Check your v ehicle radio to find a quiet channel, then use this submenu to select the same frequency . The default is 88.1MHz. The FM On/ Off menu controls whether the Here 2 Ever yw here is transmitting on the FM channel or not.
27 lev el on the stereo mini-jack to better match the stereo system. Kenwood recommends lea ving this at the factor y default lev el unless it is necessar y to change it. The most common use for this setting is to adjust headphone volume le vels if y ou are using headphones directly plugged into the cradle.
28 T ime F eatures This menu option allows y ou to control the clock, alarm, program alerts, and other features that use Here 2 Ever yw here’ s internal clock. Here 2 Ever yw here has an inter nal clock w hich auto- matically picks up Universal time from the SIRIUS broadcast.
30 31 Program Aler t: Program Aler t On/Off Use this selection to enable or disable the Program Alert. Auto Shutdown This gives y ou the option of ha ving Here 2 Ever yw here automatically shut off after a 1-hour idle period. After 59 minutes of inactivity , a displa y prompt will appear on the screen with the option “Cancel Auto Shutdown.
www.kenwoodusa.com www.kenwoodusa.com/inquiry 1-800-KENWOOD Main Office 2201 E. Dominguez St. Long Beach, CA 9081 0-1009 P .O . Box 22745 Long Beach, CA 90801-5745 Canada Office 6070 Kestrel Road Mississauga, Ontario L5T 1S8 Haw aii Office Kenwood USA Corporation 1175 Kaweolka Avenue Pearl City , HI 96782 ©2004 Kenwood USA Corporation.
An important point after buying a device Kenwood H2EV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood H2EV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood H2EV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood H2EV you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood H2EV will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood H2EV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood H2EV.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood H2EV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood H2EV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
