Instruction/ maintenance manual of the product 9411* Kenmore
Go to page of 22
® Electric Range Estufa el_ctrica Models, Modelos 790.9090*, 9091", 9400*, 9410", 9411", 9412", 9413" * = color number, nQmero de color ;iii .
Table of Contents Product Record Free-Standing Range Warranty ........................................... 2 Product Record ................................................................... 2 iMPORTANT SAFETY INSTRUCTIONS .......................... 3-4 Protection Agreements .
important Safety instructions Read all instructions before using this appliance. Save these instructions for future reference. This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given.
important Safety instructions iMPORTANT iNSTRUCTiONS FOR USING YOUR COOKTOP , Knowwhieh knob controls each surface heating unit. Place a pan of food on the unit before turning it on, and turn the unit off before removing the pan. Use Proper Pan Size--This appliance is equipped with one or more surface units of different sizes.
PROTECTION AGREEMENTS ACUERDOS DE PROTECCION In the U.S.A. Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmore C_ product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time.
RIGHT R_R • : Your Electric Range Features Include: 1. Electronic Oven Control with Kitchen Timer. 2. Single Element Control. 3. Single Element Control. 4. Single Element Control. 5. Single Element Control. 6. (not shown) 7. "ELEMENT ON" Indicator Light.
Before Setting Oven Controls OVEN VENT LOCATED UNDER LEFT REAR ELEMENT Fig. 1 Oven with visible Bake Element - Fig. 2 Oven Vent Location The oven vent is located under the left rear surface element (See Fig. 1). When the oven is on, warm air passes through the vent.
Before Setting Oven Controls (cont'd) ELEMENT ON indicator Lights ELEMENT ON Your range is equipped with surface control indicator lights that will glow on your range--the ELEMENT ON indicator lights (See illustration at left). The ELEMENT ON is located on the control panel and will glow when a surface element is turned ON.
Surface Cooking Using proper cookware The size and type of cookware used will influence the setting needed for best cooking results. Cookware should have flat bottoms that make good contact with the entire surface heating element (See Fig. 1). Check for flatness by rotating a ruler across the bottom of the cookware (See Fig.
Oven Control Functions READ TH E iNSTRUCTiONS CAREFU LLY BEFORE USING THE OVEN For satisfactory use of your oven become familiar with the various pad functions of the oven as described below BROIL PAD.
Setting Oven Controls f o • ® ® o Note: The time of day must first be set in order to operate the ovenl To Set the Clock When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".
Setting Oven Controls (cont'd) To Set or Change the Temperature for Baking The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 287°C). To Set the Controls for Baking: 1. Press B,ke. " "appears in the display.
Setting Oven Controls (cont'd) To Set for Broiling: , 2. 3. Arrange the oven rack while oven is still cool. Position the rack as suggested in the Broil Rack Position Table below. Press ,,,_ "----"will appear in display. Press and hold the A or V until the desired broil setting level appears in the display.
Self-Cleaning During the Self-Cleaning cycle, the outside of the range can become very hot to the touch. DO NOT leave small children unattended near the appliance. The health of some birds is extremely sensitive to the fumes given off during the Self-Cleaning cycle of any range.
Self-Cleaning (cont'd) Starting the Select Self=Clean Cycle For satisfactory results, use a 2 hour Self-Clean cycle for light soils and a 3 hour cycle for average or a 4 hour cycle for heavy soils. NOTE: The kitchen area should be well ventilated using an open window, ventitlation fan or exhaust hood during the 1st Self-Clean cycle.
General Care & Cleaning Cleaning Table Surfaces How to Clean Aluminum (Trim Pieces) & Vinyl Use hot, soapy water and a cloth. Dry with a clean cloth. Painted and Plastic Control Knobs, Body Parts, and Decorative Trim Forgeneral cleaning, use hot, soapy water and a cloth.
General Care & Cleaning (cont'd) Surface Elements and Drip Bowls Surface elements can be unplugged and removed to make cleaning the drip pans easier. The surface elements clean themselves when they are turned on. Food spilled on a hot element will burn off.
General Care & Cleaning Door Hinge locations with oven door fully open Fig. 1 Fig. 2 Removing and Replacing the Lift-Off Oven Door The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down. To Remove Oven Door: 1.
General Care & Cleaning Changing the Oven Light (some models) For models equipped with the interior oven light, the light bulb is located at the Oven rear of the oven and is covered with a glass shield held by a wire holder. The glass Light. shield must be in place whenever the oven is in use.
Before You Call Solutions to Common Problems Before you carl for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. OCCURRENCE Range is not level.
Before You Call Solutions to Common Problems OCCURRENCE POSSIBLE CAUSE/SOLUTION Oven light does not work. Replace or tighten bulb. See Changing Oven Light section in this Use & Care Guide. Oven smokes excessively during broiling. Poor baking results.
_iiiiiiiiiiiiii Your Home For repair = in your home = of ail major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do=it=yourself.
An important point after buying a device Kenmore 9411* (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenmore 9411* yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenmore 9411* - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenmore 9411* you will learn all the available features of the product, as well as information on its operation. The information that you get Kenmore 9411* will certainly help you make a decision on the purchase.
If you already are a holder of Kenmore 9411*, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenmore 9411*.
However, one of the most important roles played by the user manual is to help in solving problems with Kenmore 9411*. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenmore 9411* along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
