Instruction/ maintenance manual of the product 9000416647(8811) Kenmore
Go to page of 26
.
.
aus Index Safety instructions 4 . . . . . . . Delivery 4 . . . . . . . . . . . . . . . . . . . . Installation 4 . . . . . . . . . . . . . . . . . In daily use 4 . . . . . . . . . . . . . . . . . Children in the household 4 . . . . Childproof lock (door lock) 4 .
aus 4 Safety instructions Delivery Check the packaging and dishwasher immediately for damage caused in transit. Do not switch on a damaged appliance, but contact your supplier . Please dispose of the packaging material in an environmentally friendly manner .
aus 5 Damage The appliance may be repaired and opened up by a technician only . T o do this, disconnect the appliance from the power supply . Pull out the mains plug or switch of f the fuse. T urn of f the tap. Disposal Make redundant appliances unusable to prevent subsequent accidents.
aus 6 Rinse aid As soon as the rinse-aid refill indicator 4 lights up on the control panel, refill with rinse aid. The rinse aid is required for stain-free utensils and clear glasses.
aus 7 Utensils Not suitable Cutlery and utensils made of wood. Delicate decorative glasses, craft and antique utensils. These decors are not dishwasher-proof. Plastic parts not resistant to heat. Copper and tin utensils. Utensils which are soiled with ash, wax, lubricating grease or ink.
aus 8 Cups and glasses T op basket 20 * depending on model Pans Bottom basket 27 Cutlery basket Y ou should always place cutlery unsorted with the points downwards.
aus 9 Small accessories holder * * depending on model Light-weight plastic accessories, e.g. cups, lids, etc. can be held securely in the small accessories holder . Knife shelf * * depending on model Long knives and other utensils can be arranged horizontally .
aus 10 T o raise the basket, hold the basket on the sides of the upper edge and lift it up. Before re-inserting the basket again, ensure that it is at the same height on both sides. Otherwise, the appliance door cannot be closed and the upper spray arm will not be connected to the water circuit.
aus 1 1 Adding detergent Pour detergent into the dispenser 29 (insert tablet flat, not on its edge). Dosage: see manufacturer ’s instructions on the packaging. Close the cover on the detergent dispenser by sliding it up until the lock engages without dif ficulty .
aus 12 Overview of programmes The max. possible number of programmes is illustrated in this overview . The corresponding programmes for your appliance can be found on the fascia. The programme data are values measured in the laboratory in compliance with Standard AS/NSZ 2007.
aus 13 Programme selection Y ou can select a suitable programme according to the type of utensils and degree of soiling. Information about comparability tests The conditions for running comparability tests can be found on the supplementary sheet “Information for comparability tests”.
aus 14 W ashing the dishes Aqua sensor * * depending on model The Aqua sensor is an optical measuring device (light barrier) which measures the turbidity of the rinsing water .
aus 15 Timer programming * * depending on model Y ou can delay the start of the programme in 1-hour steps up to 24 hours. Open the door . Switch on ON/OFF switch 1 . Press 5 + button until the digital display 8 jumps to . Press 5 + or – button until the displayed time corresponds with your requirements.
aus 16 Changing the programme When the ST AR T button 7 has been pressed, the programme cannot be changed. The only way a programme can be changed is by Cancel programme (reset). Intensive drying The final rinse uses a higher temperature which improves the drying result.
aus 17 Filters The filters 25 keep large foreign objects in the rinsing water away from the pump. These foreign objects may occasionally block the filters. The filter system consists of a coarse filter , a flat fine filter and a microfilter . After each washing cycle check the filters for residue.
aus 18 W aste water pump Large food remnants in the rinsing water not retained by the filters may block the waste water pump. The rinsing water is then not pumped out and covers the filter . In this case: First disconnect the appliance from the power supply .
aus 19 Door cannot be closed. Door lock has been activated. T o reset, close the door with greater force. ... changing settings A setting cannot be changed, a programme starts. W rong programme button pressed. T erminate the programme (see chapter entitled “T erminating the programme (Reset)”) and start all over again.
aus 20 ... on the utensils Food residue on the utensils. Utensils placed too closely together , utensils basket overfilled. T oo little detergent. Rinse programme too weak. Spray arm rotation obstructed. Spray arm nozzles blocked. Filters blocked. Filters incorrectly inserted.
aus 21 Installation The dishwasher must be connected correctly , otherwise it will not function properly . The specifications for the inlet and outlet as well as the electrical connected loads must correspond with the required criteria as specified in the following paragraphs or in the installation instructions.
aus 22 The appliance can easily be installed in a fitted kitchen between wooden and plastic walls. If the plug is not freely accessible following installation, an allpole disconnector with a contact opening of at least 3 mm must be fitted on the installation side to satisfy the relevant safety regulations.
aus 23 T ransportation Empty the dishwasher and secure loose parts. Drain the appliance according to the following steps: T urn on the tap. Open the door . Switch on ON/OFF switch 1 . The displays of the last selected programme light up. Select programme with the highest temperature.
aus 24 aus Subjekt to modification.
40 Switch on the child-proof lock 41 Open the door with child-proof lock switched on 42 Switch of f the child-proof lock Always close the appliance door completely before leaving the appliance. Only in this way can you protect your children from potential hazards.
.
An important point after buying a device Kenmore 9000416647(8811) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenmore 9000416647(8811) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenmore 9000416647(8811) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenmore 9000416647(8811) you will learn all the available features of the product, as well as information on its operation. The information that you get Kenmore 9000416647(8811) will certainly help you make a decision on the purchase.
If you already are a holder of Kenmore 9000416647(8811), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenmore 9000416647(8811).
However, one of the most important roles played by the user manual is to help in solving problems with Kenmore 9000416647(8811). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenmore 9000416647(8811) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
