Instruction/ maintenance manual of the product 795.7929 Kenmore
Go to page of 32
® TOP FREEZER REFRIGERATOR i CONGELADOR SUPERIOR REFRIGERADOR CONGI_LATEUR SUPI_RIEUR REFRIGI_RATEUR Models / Modelos / Mod_les 795.6997_,795.6991_ 795.7997_,795.7991_ 795.6937_,795.6929_ 795.7937_,795.7929_ = color number, n_mero de colo_ num_ro de couleur tl1 Z O t=, m cn z m Z_ O r=,, "13 Z m MFL61920619 Sears, Roebuck and Co.
Warranty and Product Record Safety instructions Grounding Requirements Parts and Features Refrigerator installation Unpacking Your Refrigerator Installation Base Grill Removing and Replacing Doors Rev.
TOP FREEZER REFRIGERATOR ® Kenrnore Appliance Warranty forte Year Limited Warranty When installed, operated and maintained according to all instructions supplied with the product, if this appliance fails due to a defect in material or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME '°_ to arrange for free repair.
Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmor# _ product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time.
This guide contains many important safety messages. Always read andobey all safety messages. This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill or hurt you or others, or cause damage to the product.
This appliance is not intended for use by persons (including children) with reduce physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by person responsible for their safety.
© Use this section to become more familiar with the parts and features. Page references are included for your convenience. NOTE: This guide covers several different models. The refrigerator you have purchased may have some or all of the items listed below.
Excessive Weight Hazard Use two or more people to move and install refrigerator. Failure to do so can result in back or other injury. UNPACKING YOUR REFRIGERATOR Remove tape and any temporary labels from your refrigerator before using. Do not remove any warning-type labels or the model and serial number label.
ELECTRICAL SHOCK HAZARD Before you begin, either unplug the refrigerator or turn off power atthe circuit breaker or fuse box. Remove food and any Adjustable Door or Utility Bins from doors. Failure to do so could result in death or serious injury. If entrance is less than 35-inches wide, the refrigerator's doors will need to be removed.
REPLACE REFRIGERATOR DOOR • Set door onto Bottom Hinge Pin. • Place Hinge Pin of Middle Hinge Bracket inside Hinge Pin Insert on top of door (Fig. 7).
REVERSE FREEZER DOOR ° Gently pry off the Top Hinge Cover with a flat head screwdriver and remove (see Fig.13). Fig. 13 Using 10mm or 13/32-inch socket wrench, remove the 3 bolts and lift off the Top Hinge (see Fig.
REVERSE AND REATTACH REFRIGERATOR DOOR • Using a 1A-inch socket wrench, loosen and remove ° Hinge Pin from the Middle Hinge Pin Bracket. Remove washer underneath the middle hinge and • set aside NOTE: At this point the door will be loose, lift up o door slightly and remove it.
• At this point, remove the Decorative Bolt on bottom on refrigerator housing from the leftside of refrigerator (Fig. 24). You will need this hole for the Bottom Hinge. Fig. 24 • Move the Bottom Hinge to the left side of housing keeping the same orientation, and reattach with 3 bolts (Fig.
Remove the outer lower Decorative Screw from housing at area between freezer and refrigerator doors (Fig. 31). You will need this hole fortheMiddle Hinge Bracket). Fig. 31¢}...._ _:_; © Place Upper Hinge's Pin in the top offreezer door and line uptheUpper Hinge with holes in top of refrigerator.
LEVELING AND DOOR CLOSING To avoid vibration, the unit must be leveled, if necessary, adjust the Leveling Legs to compensate for unevenness of the floor. The front should be slightly higher than the rear to aid in door closing. Your refrigerator has two Front Leveling Screws - one on the right and one on the left.
ENSURING PROPER AiR CiRCULATiON In order to ensure proper temperatures, air must flow between the refrigerator and freezer sections. As shown in the illustration below, cool air enters through the bottom of the freezer section and moves up. Most of the air then flows through the freezer section vents and recirculates under the freezer floor.
ADJUSTING CONTROL SETTINGS Give the refrigerator time to cool down completely before making final adjustments. It is best to wait 24 hours before doing this. The recommended settings mentioned in SETTING THE CONTROLS section should be correct for normal household refrigerator use.
STORING FROZEN FOOD NOTE: For further information about preparing food for freezing or food storage times, check a freezer guide or a reliable cookbook. Packaging Successful freezing depends on correct packaging. Close and seal packages so no air or moisture can pass in or out.
REFRIGERATOR SHELVES The shelves in your refrigerator are adjustable to meet your individual storage needs. All the shelves in this unit are glass. Storing similar food items together in your refriger.
CRISPER AND CRISPER COVER To remove the crisper: 1. Pull crisper drawer out to drawer stop. 2. Lift the drawer up and toward you to pull out and remove. 3. To replace crisper, slide back in fully past the drawer stop. To remove crisper glass: 1. Remove crisper drawers.
DOOR BiNS The door bins are removable for easy cleaning and adjusting. They have slots in the sides which fit into support slots placed at intervals on refrigerator door. 1. To remove a bin, lift the bin up until it clears the support slots and lift out.
Explosion Hazard Use non-flammable cleaner. Failure to do so can result in death, explosion or fire. Both the refrigerator and freezer sections defrost automatically. However, clean both sections about once a month to prevent odors. Wipe up spills immediately.
To change the refrigerator light: 1. Unplug the power cord from the outlet. 2. Remove refrigerator shelves. 3. Light shield is force fitted and has plastic tabs on each side and a tab in the front. Release the tabs on each side of light shield and push shield toward rear of refrigerator and remove.
Personal injury Hazard Avoid contact with the moving parts of the ejector mechanism, or with the heating element that releases the cubes. DO NOT place fingers or hands on the automatic icemaking mechanism while the refrigerator is plugged in. The icemaker will begin to operate when it lowers to freezing temperature.
NOTE: Water line installation is needed when the Automatic Icemaker and/or Water Dispenser features are available on your product. BEFORE YOU BEGIN This water line installation is not warranted by the refrigerator or icemaker manufacturer. Follow these instructions carefully to minimize the risk of expensive water damage.
INSTALLATION INSTRUCTIONS (CONTINUED) 2. CHOOSE THE VALVE LOCATION Choose a location for the valve that is easily accessible. It is best to connect into the side of a vertical water pipe.
9. CONNECT THE TUBING TO THE REFRIGERATOR NOTES: • Before making the connection to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet.
UNDERSTANDING SOUNDS YOU MAY HEAR Your new refrigerator may make sounds that your old one didn't make. Because the sounds are new to you, you might be concerned about them. Most of the new sounds are normal. Hard surfaces, like the floor, walls and cabinets, can make the sounds seem louder than they actually are.
LIGHTS DO NOT WORK Check if... Then... The power supply cord is unplugged. Firmly plug the cord into a live outlet with proper voltage. Light bulb is loose in the socket. Either unplug the refrigerator or turn off power at the circuit breaker or fuse box.
FROST OR iCE CRYSTALS ON FROZEN FOOD Check if... Then... The door is not closing properly. See "Doors will not close completely" above. The door is opened often. When the door is opened, warm, humid air is allowed in the freezer resulting in frost.
THE DOORS ARE DiFFiCULT TO OPEN Check if... Then... Clean gaskets and the surfaces that they touch. Rub a thin coat of paraffin wax on the gaskets following cleaning. The gaskets are dirty or sticky. The door is reopened within a short time after having been opened.
iiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiii_i > iiiiiiiiiiiiiiiiiiiiiiii _'_ iiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiii iiiii.
An important point after buying a device Kenmore 795.7929 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenmore 795.7929 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenmore 795.7929 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenmore 795.7929 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenmore 795.7929 will certainly help you make a decision on the purchase.
If you already are a holder of Kenmore 795.7929, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenmore 795.7929.
However, one of the most important roles played by the user manual is to help in solving problems with Kenmore 795.7929. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenmore 795.7929 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
