Instruction/ maintenance manual of the product 795.7871 Kenmore
Go to page of 40
E L | T E %_ BOTTOM FREEZER REFRIGERATOR Use & Care Guide o 2 CONGELADOR INFERIOR REFRIGERADOR Guia para el Uso y Cuidado ° 40 CONGI_LATEUR INFCRIEUR RCFRIGI_RATEUR Guide d'Utifisation et d'Entretien o 78 Models / Modelos / Modeles 795.
English Version 2 Spanish Version 40 French Version 78 Warranty 3 Protection Agreements 4 Safety Instructions 5-6 Grounding Requirements 6 Parts And Features 7 Refrigerator Installation 8-19 Unpacking.
E Ll T E J® BOTTOM FREEZER REFRIGERATOR WARRANTY f Kenmore Elite Appliance Warranty One Year Limited Warranty When installed, operated and maintained according to all instructions supplied with the p.
Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmore ® product is designed and manufactured for years of dependable opera-tion. But like all products, it may require preventive maintenance or repair from time to time.
BASIC SAFETY PRECAUTIONS This guide contains many important safety messages. Always read and obey all safety messages. This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill or hurt you or others, or cause damage to the product.
Junked or abandoned refrigerators are dangerous...even if they will sit for just a few days. tf you are getting rid of your old refrigerator, please follow the instructions at right to help prevent accidents (Child entrapment and suffocation). BEFORE YOU THROW AWAY YOUR OLD REFRIGERATOR OR FREEZER • Take off the doors.
Use this page to become more familiar with the parts and features. Page references are included foryour convenience. NOTE: This guide covers several different models. The refrigerator you have purchased may have some or allof the items listed below. The locations of the features shown below may not match your model.
Excessive Weight Hazard Use two or more people to move and install refrigerator. Failure to do so can result in back or other injury. UNPACKING YOUR REFRIGERATOR Remove tape and any temporary labels from your refrigerator before using.
NOTE: It is "always" recommend that the doors be removed when it is necessary to move the refrigerator through a narrow opening. If it is necessary to remove the handles follow the directions below. HOW TO REMOVE DOOR HANDLES (795.7854*, 7855* Models Olny) NOTE: Handle appearance may vary from illustrations on this page.
HOW TO REPLACE DOOR HANDLES (795.7854*, 7855* Models Olny) NOTE: Handle appearance may vary from illustrations on this page. 1. Replacing Refrigerator Door Handle • Place the handle on the door by adjusting handle footprints to fit mounting fastners and tighten the set screws with the 3/32" Allen wrench.
NOTE: It is "always" recommend that the doors be removed when it is necessary to move the refrigerator through a narrow opening. If it is necessary to remove the handles follow the directions below. HOW TO REMOVE DOOR HANDLES (795. 78712, 78713, 78722, 78723 Models Olny) NOTE: Handle appearance may vary from illustrations on this page.
HOW TO REPLACE DOOR HANDLES (795. 78712, 78713, 78722, 78723 Models Olny) NOTE: Handle appearance may vary from illustrations on this page. 1. Replacing Refrigerator Handle • Align keyhole slots (1) on the top and bottom of the back of the handle with the screws (2) mounted on the front of the door.
NOTE: It is "always" recommend that the doors be removed when it is necessary to move the refrigerator through a narrow opening. If it is necessary to remove the handles follow the directions below. HOW TO REMOVE DOOR HANDLES (795. 78719, 78729 Models Olny) NOTE: Handle appearance may vary from illustrations on this page.
HOW TO REPLACE DOOR HANDLES (795. 78719, 78729 Models Olny) NOTE: Handle appearance may vary from illustrations on this page. 1. Replacing Refrigerator Handle • Align the screw holes of handle and door and tighten the screws (1). • Tighten the screws (2).
REMOVING AND REPLACING REFRIGERATOR DOORS To remove the left refrigerator door: Pull the water tube out of the fitting while pressing the release ring on the fitting. When you pull out the tube, first you have to push the collet by opposite direction of arrow in the upper picture and tube pull out by direction of arrow.
Reinstalling the Refrigerator Door I_ Right Door 1. Lower the door onto middle hinge pin (9). 2. Fit top hinge (7) over hinge lever latch (8) and into place. Insert hinge lever (6) under lever latch. Rotate lever counterclockwise to secure hinge. 3. Install the grounding screw (5) and connect wire harnesses (4).
HOW TO REMOVE AND INSTALL THE PULLOUT DRAWER IMPORTANT: To avoid possible injury or product or property damage, you will need two people to perform the following instructions. 1. Removing Pullout Drawer • Pull the drawer open to full extension. Remove the lower basket (1) by lifting basket from rail system.
HOW TO REMOVE AND INSTALL THE PULLOUT DRAWER IMPORTANT: To avoid possible injury or product or property damage, you will need two people to perform the following instructions. 2. Installing Pullout Drawer • With both hands, hold the center bar and pull it out to let both rails out to full extension simultaneously.
LEVELING AND DOOR ALIGNMENT Leveling After installing, secure the product with the LEG not to move left or right. Your refrigerator has two front leveling legs--one on the right and one on the left. Adjust legs to alter tilt from front- to-back or side-to-side.
ENSURING PROPER AIR CIRCULATION In order to ensure proper temperatures, air must flow between the refrigerator and freezer sections. As shown in the illustration below, air enters at top of the freezer and circulates down. From the bottom of the freezer, air is forced up to the top of the refrigerator.
ADJUSTING CONTROL SETTINGS Give the refrigerator time to cool down completely before making final adjustments. It is best to wait 24 hours before doing this. The mid-settings indicated in the previous section should be correct for normal household refrigerator usage.
STORING FROZEN FOOD NOTE: For further information about preparing food for freezing or food storage times, check a freezer guide or a reliable cookbook. Packaging Successful freezing depends on correct packaging. When you close and seal the package, it must not allow air or moisture in or out.
REFRIGERATOR SHELVES The shelves in your refrigerator are adjustable to meet your individual storage needs. Your model may have glass or wire shelves. Storing similar food items together in your refri.
HUMIDITY CONTROLLED CRISPER The crispers provide fresher-tasting fruit and vegetables by letting you easily control humidity inside the drawer. The crispers include: A crisper drawer humidity control switch. You can control the amount of humidity in the moisture-sealed crispers.
DOOR BIN The door bins are removable for easy cleaning and adjusting. 1. To remove the bin, simply lift the bin up and pull straight out. 2. To replace the bin, slide it in above the desired support button and push down until it snaps in the place. A WARNING: Somebody can be hurt if door bins are not firmly assembled.
TILT-OUT DOOR BASKET To remove basket 1. Pull one of the brackets upward. 2. Remove basket from both brackets. To replace basket 1. Insert bracket into one side. Hook end of basket into bracket. 2. Hook other basket end into other bracket. Push bracket down into place.
FILTER It is recommended that you replace the filter when the water filter indicator icon turns on or your water dispenser or ice maker performance decreases noticeably. After changing the water filter cartridge, reset the water filter status display and indicator icon by pressing and holding the Filter Reset button for 3 seconds.
Explosion Hazard Use non-flammable cleaner. Failure to do so can result in death, explosion, or fire. Both the refrigerator and freezer sections defrost automatically. However, clean both sections about once a month to prevent odors. Wipe up spills immediately.
To change freezer light NOTE: Some models have LED interior lighting and service should be performed by a qualified technician. 1. Unplug refrigerator power cord form outlet. 2. Using a flat instrument, gently pry the lamp cover loose in the front as shown.
Personal injury Hazard Avoid contact with the moving parts of the ejector mechanism, or with the heating element that releases the cubes. DO NOT place fingers or hands on the automatic icemaking mechanism while the refrigerator is plugged in. OPERATION INSTRUCTIONS A newly-installed refrigerator may take 12 to 24 hours to begin making ice.
BEFORE YOU BEGIN This water line installation is not warranted by the refrigerator or icemaker manufacturer. Follow these instructions carefully to minimize the risk of expensive water damage. Water hammer (water banging in the pipes) in house plumbing can cause damage to refrigerator parts and lead to water leakage or flooding.
INSTALLATION INSTRUCTIONS (CONTINUED) 4. FASTEN THE SHUTOFF VALVE Fasten the shutoff valve to the cold water pipe with the pipe clamp. Pipe Clamp Saddle-Type Shutoff Valve Vertical Cold Water Pipe NOTE: Commonwealth of Massachusetts Plumbing Codes 248CMR shall be adhered to.
9. CONNECT THE TUBING TO THE REFRIGERATOR Removing and Replacing Valve Cover. NOTE: • Before making the connection to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet. 1. Remove the plastic flexible cap from the water valve.
UNDERSTANDING SOUNDS YOU MAY HEAR Your new refrigerator may make sounds that your old one didn't make. Because the sounds are new to you, you might be concerned about them. Most of the new sounds are normal. Hard surfaces, like the floor, walls and cabinets, can make the sounds seem louder than they actually are.
COMPRESSOR MOTOR SEEMS TO RUN TOO MUCH Check if... Then... The refrigerator that was replaced was an older Modern refrigerators with more storage space require more model, operating time. The room temperature is hotter than normal. The motor will run longer under warm conditions.
ICE HAS OFF-TASTE OR ODOR Check if... Then... The icemaker was recently installed. Discard first few batches of ice to avoid discolored or off- flavored ice.
THE DOORS ARE DIFFICULT TO OPEN Check if... The gaskets are dirty or sticky. The door is reopened within a short time after having been opened. Then... Clean gaskets and the surfaces that they touch. Rub a thin coat of appliance polish or kitchen wax on the gaskets after cleaning.
38.
39.
.... You r Ho m e For expert troubleshooting and home solutions advice: e www.ma.agomyhome.com For repair- in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! .
An important point after buying a device Kenmore 795.7871 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenmore 795.7871 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenmore 795.7871 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenmore 795.7871 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenmore 795.7871 will certainly help you make a decision on the purchase.
If you already are a holder of Kenmore 795.7871, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenmore 795.7871.
However, one of the most important roles played by the user manual is to help in solving problems with Kenmore 795.7871. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenmore 795.7871 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
