Instruction/ maintenance manual of the product 7858 Kenmore
Go to page of 17
® Gas Range Estufa a as Mode{s, Mode{os 790. 7851", 7852*, 7853*, 7854*, 7857*, 7858*, 7859*, 7861", 7862* * = co{or number, nQmero de co{or ¢)¢j ¢j_ ii'% iii ................ www.sears.com Sears Roebuck and Co., Hoffman Estates, {L 60179 U.
Table of Contents Product Record Free-Standing Range Warranty ........................................... 2 Product Record ................................................................... 2 iMPORTANT SAFETY iNSTRUCTiONS .......................... 3-5 Protection Agreements .
important Safety instructions Read all instructions before using this appliance. Save these instructions for future reference. This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given.
important Safety instructions Do Not Leave Children AIoneiChildren should not be left alone or unattended in the area where appliance is in use. They should never be allowed to sit or stand on any part of the appliance. DO NOT TOUCH SURFACE BURNERS, AREAS NEAR THESE BURNERS, OVEN BURNERS OR INTERIOR SURFACES OF THE OVEN.
important Safety instructions Conversion to Liquefied Petroleum Gas (or L.P. Gas) The natural gas range is designed to allow for conversion to Liquefied Petroleum (L.P.) Gas. If L.P. conversion is needed, contact 1-800-4-MY-HOME® for assistance. The L.
PROTECTION AGREEMENTS ACUERDOS DE PROTECCION In the U.S.A. Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmore C_ product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time.
Before Setting Oven Controls OVEN VENT i Fig. 1 Fig. 2 Oven Vent Location The oven vent is located below the backguard (See Fig. 1 ). When the oven is on, warm air is released through this vent. This venting is necessary for proper air circulation in the oven and good baking results.
Setting Surface Controls Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on top of the range when it is in use. These items could melt or ignite. Potholders, towels or wood spoons could catch fire if placed too close to a flame.
Oven Control Functions READTHEINSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. Forsatisfactoryuseofyouroven, becomefamiiiarwith the various pad functions of the oven as described below. CLOCK SET PAD Used to set the time of day. TIMER ON/OFF PAD Used to set or cancel the minute timer.
Setting Oven Controls (cont'd) Note: The indicator light located above the _ pad will glow while the minute timer is active. Note: The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time has run out.
Setting Oven Controls (cont'd) To Set for Broiling: 1. Arrange the oven rack while oven is still cool. Position the rack as suggested in the Broil Rack Position Table below. 2. Press B,o, ,,__,,will appear in display. 3. Press and hold the ,i_ or V until the desired broil setting level appears in the display.
Self-Cleaning (cont'd) • Oven racks should be removed, if they are not removed during the Self-Clean cycle their color will turn slightly blue and the finish will be dull.
General Care & Cleaning Cleaning Chart Surfaces How to CJean Glass, Painted Plastic Body Parts & Control Knobs For general cleaning, use a soft cloth, clean with mild dish detergent & water or a 50/50 solution of vinegar & water. Follow by rinsing the area with clean water; dry & polish with a soft cloth.
General Care & Cleaning (cont'd) Cleaning the Contoured Well Areas, Burner Cap, Burner Head and Burner Drip Pans (some models) The contoured well areas, burner cap, burner head and burner drip pans (some models) should be routinely cleaned. Keeping the burner ports clean will prevent improper ignition and an uneven flame.
General Care & Cleaning (cont'd) Special Door Care Instructions- Most oven doors contain glass that can break. Read the following recommendations: 1. Do not close the oven door until all the oven racks are fully in place. 2. Do not hit the glass with pots, pans, or any other object.
Before You Call Solutions to Common Problems Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. Range is not level - (1) Poor installation.
® Registered Trademark / TM Trademark / SM Service Mark of Sears Brands, LLC ® Marca Registrada / TM Marca de Fabrica / SM Marca de Servicio de Sears Brands, LLC MC Marque de commerce / MD Marque de.
An important point after buying a device Kenmore 7858 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenmore 7858 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenmore 7858 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenmore 7858 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenmore 7858 will certainly help you make a decision on the purchase.
If you already are a holder of Kenmore 7858, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenmore 7858.
However, one of the most important roles played by the user manual is to help in solving problems with Kenmore 7858. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenmore 7858 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
