Instruction/ maintenance manual of the product 7156 Kenmore
Go to page of 17
® Estufa a _nge as Models, Mode{os 790. 7156" * = color number, nQmero de color www.sears.com Sears Roebuck and Co., Hoffman Estates, iL 60179 U.
Table of Contents Free-Standing Range Warranty ........................................... 2 Product Record ................................................................... 2 IMPORTANT SAFETY INSTRUCTIONS .......................... 3-5 Protection Agreements .
important Safety instructions Read all instructions before using this appliance. Save these instructions for future reference. This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given.
important Safety instructions , Do Not Leave Children Alone--Children should not be left alone or unattended in the area where appliance is in use, They should never be allowed to sit or stand on any part of the appliance. , DO NOT TOUCH SURFACE BURNERS, AREAS NEAR THESE BURNERS, OVEN BURNERS ORINTERIOR SURFACES OF THE OVEN.
important Safety instructions Conversion to Liquefied Petroleum Gas (or L.P. Gas) The natural gas range is designed to allow for conversion to Liquefied Petroleum (L.P.) Gas. If L.P. conversion is needed, contact 1-800-4-MY-HOME® for assistance. The L.
Protection Ag reements Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmore ® product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time.
Before Setting Oven Controls OVEN VENT Fig. ] Fig. 2 Oven Vent Location The oven vent is located below the backguard (See Fig. 1). When the oven is on, warm air is released through this vent. This venting is necessary for proper air circulation in the oven and good baking results.
Setting Surface Controls Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on top of the range when it is in use. These items could melt or ignite. Potholders, towels or wood spoons could catch fire if placed too close to a flame.
Oven Control Functions READ TH E iNSTRUCTiONS CAREFU LLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various pad functions of the oven as described below. BROIL PAD Used to select the variable broil function. CLOCK SET PAD Used to set the time of da,.
Setting Oven Controls (cont'd) Note: The indicator light located above the _ pad will glow while the minute timer is active. Note: The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time has run out.
Setting Oven Controls (cont'd) To Set for Broiling: 1. Arrange the oven rack while oven is still cool. Position the rack as suggested in the Broil Rack Position Table below. f_ 2. Press B,o, ,, ____,,will appear in display. 3. Press and hold the iX.
Self-Cleaning (cont'd) • Oven racks should be removed, if they are not removed during the Self-Clean cycle their color will turn slightly blue and the finish will be dull.
General Care & Cleaning Cleaning Chart Surfaces How to CJean Glass, Painted Plastic Body Parts & Control Knobs For general cleaning, use a soft cloth, clean with mild dish detergent & water or a 50/50 solution of vinegar & water. Follow by rinsing the area with clean water; dry & polish with a soft cloth.
General Care & Cleaning (cont'd) Cleaning the Contoured WellAreas, Burner Cap, Burner Head and Burner Drip Pans (some models) The contoured well areas, burner cap, burner head and burner drip pans (some models) should be routinely cleaned. Keeping the burner ports clean will prevent improper ignition and an uneven flame.
General Care & Cleaning (cont'd) Special Door Care Instructions- Most oven doors contain glass that can break. Read the following recommendations: 1. Do not close the oven door until all the oven racks are fully in place. 2. Do not hit the glass with pots, pans, or any other object.
Before You Call Solutions to Common Problems Before you carl for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. Range is not level - (1) Poor installation.
Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself.
An important point after buying a device Kenmore 7156 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenmore 7156 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenmore 7156 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenmore 7156 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenmore 7156 will certainly help you make a decision on the purchase.
If you already are a holder of Kenmore 7156, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenmore 7156.
However, one of the most important roles played by the user manual is to help in solving problems with Kenmore 7156. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenmore 7156 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
