Instruction/ maintenance manual of the product 7010" Kenmore
Go to page of 16
Gas _nge Estufa de as Models, Modelos 790.1500",7010",7027",7028", 7029*, 7101", 7103",7104",7105",7204",7305",7404", 7605* *= colornumber, nQmero de color www.sears.com Sears Roebuck and Co., Hoffman Estates, IL 60179 U.
Table of Contents Product Record Free-Standing Range Warranty ........................................... 2 Product Record ................................................................... 2 Serial Plate Location ....................................
important Safety instructions Read all instructions before using this appliance. Save these instructions for future reference. This Use & Care guide contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given.
important Safety instructions • DO NOT TOUCH SURFACE BURNERS, AREAS NEAR THESE BURNERS, OVEN BURNERS OR iNTERiOR SURFACES OF THE OVEN. Both surface and oven burners may be hot even though flames are not visible. Areas near surface burners may become hot enough to cause burns.
Grounding type wall receptacle Power supply cord with 3-prong grounding plug Important Safety Instructions Do not, under any circumstance, cut, remove, or bypass the grounding prong. GROUNDING INSTRUCTIONS (electric ignition models only) Avoid fire hazard or electrical shock.
PROTECTION AGREEMENTS ACUERDOS DE PROTECCION In the U.S.A. Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmore ® product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time.
Setting Surface Controls Do not place plastic items such as salt and peppershakers, spoon holders or plastic wrappings on top of the range when it is in use. These items could melt or ignite. Potholders, towels orwood spoons could catch fire if placed too close to a flame.
Oven Vent Before Setting Oven Controls Oven Vent Location The oven vent is located below the backguard. When the oven is on, warm air is released through this vent. This venting is necessary for proper air circulation in the oven and good baking results.
Setting Clock & Minute Timer To Set the MinuteTimer Push "0:00" will appear in the display window. The timer can be set for any amount of time from 00:01 minute to 12:00 hours. 2. Push in and hold /_, until the correct amount of time appears in the display.
General Care & Cleaning Followthesecleaningprecautions: ] , AIl°w the °ven t° c°°l bef°re cleaning/ Wear rubber gloves when cleaning / the appliance manually. J Ammonia must be rinsed before operating the oven. Provide adequate ventilation. DO NOT line the oven walls, bottom, racks or any other part of the appliance with aluminum foil.
General Care & Cleaning Cleaning Various Parts of Your Range Before cleaning any part of the range, be sure all controls are turned OFF and the range is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANINGS WILL REDUCE THE EFFORT REQIRED FOR MAJOR CLEANINGS LATER.
General Care & Cleaning To Raise and Lower theTop for Cleaning 1. Remove burner grates and spillover bowls. Set aside. 2. Grasp the sides of the cooktop and then lift from the front. 3. Liftthetophighenoughtoallowthesupportrodstosnapintoplace. The Lift-uprodswillsupportthetopinitsraised position.
Oven Light or use a Nail Fig. 1 Fig. 2 about45 _.degrees Oven Door Hinge Fig. 3 _-_-- General Care & Cleaning Changing the Oven Light (some models) On some models, the oven light automatically turns on when the door is opened. Some models have a switch located on the control panel to turn on the light.
Before You Call Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. OCCURRENCE Range is not level. Cannot move appliance easily.
Before You Call Oven smokes excessively during broiling. Meat too close to the broil burner. Reposition the rack to provide more clearance between the meat and the broiler. Poor baking results, Meat not properly prepared. Remove excess fat from meat. Slash remaining fatty edges to prevent curling, but do not cut into the lean.
You r H o m e For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner s manuals that you need to do-it-yourself.
An important point after buying a device Kenmore 7010" (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenmore 7010" yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenmore 7010" - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenmore 7010" you will learn all the available features of the product, as well as information on its operation. The information that you get Kenmore 7010" will certainly help you make a decision on the purchase.
If you already are a holder of Kenmore 7010", but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenmore 7010".
However, one of the most important roles played by the user manual is to help in solving problems with Kenmore 7010". Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenmore 7010" along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
