Instruction/ maintenance manual of the product 625.384650 Kenmore
Go to page of 12
OWNER'S MANUAL MODEL NO. 625.384650 Caution: Read and Follow All Safety Rules, Installation and Operating Instructions Before First Use of This Product. If you have questions when installing and using your drinking water filter system, call this toll-free number.
SAFETY GUIDES / SPECIFICATIONS • Read all steps and guides carefully before instal- ling and using your undersink drinking water filter system. Follow all steps exactly to correctly install. Reading this manual will also help you to get all the benefits from the undersink drinking water filter system.
TABLE OF CONTENTS Parts of the System / Typical Installation Drawing / Tools and Materials Needed ................................................ 4 Drinking Water Filter System Installation ........................... 5 - 7 Installing Supply Fitting .
PARTS OF THE SYSTEM MATERIALS AND TOOLS NEEDED filter system assembly including mounting brack- et and screws water supply fitting filtered water faucet for sink or countertop mount- ing 3/8" tub.
INSTALLATION STEPS STEP 1 - COLD WATER SUPPLY FITTING Check and comply with local plumbing codes as you plan, then install a cold feed (supply) water fitting. The fitting must provide a leak- tight connection to the water filter 3 / 8" tubing. A typical connection using the in- cluded water supply fitting is shown in FIG.
INSTALLATION STEPS STEP 2 - MAKE HOLE FOR FILTERED WATER FAUCET Select one of the following places to install the faucet. Be sure there's room underneath so you can make the needed connections. -- In an existing sink spray attachment hole. -- Drill a hole in the sink top.
INSTALLATION STEPS STEP 4 - MAKE TUBING CONNECTIONS 1. Allowing some slack, measure and cut a length of 3/8" tubing to connect between the supply fitting and the filter system inlet, FIG. 1. Cut the ends of the tubing square. 2. Insert tubing all the way into the supply fitting and inlet fitting.
USING THE SYSTEM The sink or countertop faucet has a hand operated knob to access drinking water. Turning the knob to the left opens the faucet, turning to the fight shuts off the faucet.
FILTER CARTRIDGE REPLACEMENT CAUTION: Never remove sumps with water pres- sure in the filter system. 1. Close the water supply shut-off valve (FIG. 1, page 4) to the filter. Open the filtered water faucet to relieve pressure in the system. 2. Turn the sump off of the filter head, to the left or clockwise 1/4 turn.
REPAIR PARTS Kenmore Deluxe Dual-Stage Drinking Water System, Model No. 625.384650 I 7 _6 2 1 5 lO.
REPAIR PARTS LIST KEY PART DESCRIPTION NO. NUMBER 1 7221128 Sump (2 req.) 2 7223633 O-Ring (2 req.) 3 42-38466 Filter, Carbon Block (2 Pack) 4 9006062 Screw (2 req.
OWNERS MANUAL MODEL NO. 625.384650 The model number of your drinking water filter system is found on the rating decal, located on the back of the post filter. When requesting service or ordering parts, always provide the following in- formation: 4, Product Type 4, Model Number 4, Part Number 4, Part Description www.
An important point after buying a device Kenmore 625.384650 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenmore 625.384650 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenmore 625.384650 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenmore 625.384650 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenmore 625.384650 will certainly help you make a decision on the purchase.
If you already are a holder of Kenmore 625.384650, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenmore 625.384650.
However, one of the most important roles played by the user manual is to help in solving problems with Kenmore 625.384650. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenmore 625.384650 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
