Instruction/ maintenance manual of the product 625.34859 Kenmore
Go to page of 32
PRINTED IN U.S.A. SA VE THIS MANUAL Use plastic bag and tie provided, to hang manuals nearby the softener for future reference. Deluxe Demand W ater Softeners ◆ W arranty ◆ Start Up / Setting T im.
W ARRANTY 2 SEARS RESIDENTIAL W A TER SOFTENER FULL ONE YEAR W ARRANTY ON W A TER SOFTENER For one year from the date of purchase, when this water softener is installed and maintained in accordance with our instructions, Sears will repair , free of charge, defects in material or work- manship in this water softener .
T ABLE OF CONTENTS 3 P AGE NO. SECTION 1 SOFTENER ST ART UP A. SAFETY GUIDES 4 B. CHECK LIST OF STEP-BY -STEP GUIDES T O INST ALL 5 C. PROGRAM THE TIMER 6-7 D. SANITIZING THE W A TER SOFTENER 8 E. FILL THE STORAGE T ANK WITH SAL T 9 SECTION 2 HOW YOUR W A TER SOFTENER WORKS A.
W A TER SOFTENER ST ART -UP SECTION 1 4 1A. SAFETY GUIDES ▲ Read all steps, guides and rules carefully be- fore installing and using your new water softener . Follow all steps exactly to correctly install. Fail- ure to follow them could cause personal injury or property damage.
W A TER SOFTENER ST ART -UP SECTION 1 5 1B. CHECK LIST OF ALL STEP-BY -STEP GUIDES TO INST ALL Refer to the Installation Manual, part no. 7159931, for stepĆbyĆstep guides. T o be sure you have done all the steps to install the softener , read the following list.
W A TER SOFTENER ST ART -UP SECTION 1 6 1C. PROGRAM THE TIMER FIG. 1 DOWN button UP button display SELECT button ON/OFF–HOLD button (Recharge T onight–Now) SELECT ON/OFF HOLD RECHARGE TONIGHT RECH.
W A TER SOFTENER ST ART -UP SECTION 1 7 1C. PROGRAM THE TIMER 2 . SET W A TER HARDNESS NUMBER: ■ Press the SELECT button once to display 25 (flashing) and HARDNESS. The grains per gallon (gpg) hardness of your water supply is on your water analysis report.
W A TER SOFTENER ST ART -UP SECTION 1 8 1D. SANITIZING THE W A TER SOFTENER Care is taken at the factory to keep your water softener clean and sanitary. Materials used to make the softener will not infect or contaminate your water supply, and will not cause bacteria to for m or grow.
W A TER SOFTENER ST ART -UP SECTION 1 9 1E. FILL THE STORAGE T ANK WITH SAL T Brine (salt dissolved in water) is needed for each and every regeneration. The water for making brine is metered into the salt storage tank by the softener . However , you must keep the tank filled with salt.
HOW YOUR W A TER SOFTENER WORKS SECTION 2 10 2B. F ACE PLA TE TIMER FEA TURES EXTRA RECHARGE Sometimes, a manually started regeneration (reĆ charge) may be desired, or needed. Two examples are : --Y ou have used more water than usual (guests visiting) and you may run out of soft water before the next timer started regeneration.
HOW YOUR W A TER SOFTENER WORKS SECTION 2 11 2A. F ACE PLA TE TIMER FEA TURES OPTIONAL SETTINGS– CLEAN FEA TURE MINUTES, MAXIMUM DA YS BETWEEN REGEN- ERA TIONS, and 12 / 24 HOUR TIME READINGS : 1. T o set 1, 2 or all 3 options, press and hold SELECT for 3 seconds.
HOW YOUR W A TER SOFTENER WORKS SECTION 2 12 2B. SOFT W A TER SERVICE AND REGENERA TION SERVICE When the softener is giving you soft water , it is called Service". During service, hard water flows through the house main water pipe into the softener .
HOW YOUR W A TER SOFTENER WORKS SECTION 2 13 2B. SOFT W A TER SERVICE AND REGENERA TION BRINING: During brining, the brine is moved from the salt storage area, into the resin tank. Inside the resin tank, brine cleans hardness minerals from the resin beads and they are discharged out the drain.
HOW YOUR W A TER SOFTENER WORKS SECTION 2 14 2B. SOFT W A TER SERVICE AND REGENERA TION AUTOMA TIC BYP ASS During the brining, brine rinse and backwash cycles of regeneration, water goes through the softener valve and to the house pipes.
CARE OF YOUR SOFTENER SECTION 3 15 3A. SAL T … REFILLING STORAGE T ANK/BREAKING A SAL T BRIDGE WHEN TO REFILL WITH SAL T The Salt Monitor System (see page 10) will turn on the low salt light to warn you when to refill with salt. Check for a low salt light a few weeks after you install the softener , and every week after that.
CARE OF YOUR SOFTENER SECTION 3 16 3B. KEEPING THE W A TER SOFTENER CLEAN COVERS T o keep your new Kenmore water softener looking nice, apply a coat of paste wax and repeat once a year . When dusty, wipe it with a damp cloth to keep it sparkling. NOTE: Never use cleaners having ammonia or abrasives.
CARE OF YOUR SOFTENER SECTION 3 17 3C. KEEP THE SOFTENER FROM FREEZING If the softener is installed where it could freeze (summer cabin, lake home, etc.), you must drain all water from it to stop possible freeze damage. T o drain the softener Ċ 1. Close the shutĆoff valve on the house main water pipe, near the water meter or pressure tank.
CARE OF YOUR SOFTENER SECTION 3 18 3D. HELPFUL HINTS CHECKLIST ... TO HELP YOU SA VE MONEY If your water softener fails to work, make the following easy checks. Often, you will find what's wrong yourself and you won't have to call and wait for service.
OTHER THINGS TO KNOW SECTION 4 19 4A. DIMENSIONS/SPECIFICA TIONS FIG. 12 BYP ASS V AL VES INCHES CM A Salt T ank Height 40-1/4 102.2 B Resin T ank Diameter (nominal) 9 22.7 C Resin T ank Height (nominal) 40 101.6 D Inlet-Outlet Height 41-1/2 105.4 E Overall Height 46 1 16.
SERVICE TECH. INFORMA TION SECTION 5 20 5A. TROUBLESHOOTING Keep this manual with your water softener . If repairs are needed, the service technician must have the informaĆ tion on the following 8 pages. For telephone assistance, call toll free, 1-800-426-9345.
SERVICE TECH INFORMA TION SECTION 5 21 5A. TROUBLESHOOTING AUTOMA TIC ELECTRONIC DIAGNOSTICS The face plate computer has a selfĆdiagnostic function for the electrical system (except input power and water meter). The computer monitors the electronic components and cirĆ cuits for correct operation.
SERVICE TECH. INFORMA TION SECTION 5 22 5A. TROUBLESHOOTING V AL VE POSITION INDICA TORS: Depending on the valve position, the following indicators show in the display: INDICA TOR V AL VE POSITION Serv service . . . . . . . . . Fill fill . . . . . . .
SERVICE TECH INFORMA TION SECTION 5 23 5A. TROUBLESHOOTING MANUAL ADV ANCE REGENERA TION CHECK This check verifies proper operation of the valve motor , brine tank fill, brine draw, regeneration flow rates, and other controller functions. Always make the initial checks, and the manual initiated diagnostics.
SERVICE TECH. INFORMA TION SECTION 5 24 5B. ROT AR Y V AL VE SERVICE Before working on the valve, tur n of f the water supply and disconnect from electrical power . TO RELIEVE PRESSURE: -- 3 V AL VE BYP ASS: Close the inlet valve and open a soft water faucet.
SERVICE TECH INFORMA TION SECTION 5 25 5C .. W A TER FLOW THROUGH THE SOFTENER V AL VE SERVICE CYCLE .
SERVICE TECH. INFORMA TION SECTION 5 26 5C. W A TER FLOW THROUGH THE SOFTENER V AL VE BRINING AND BRINE RINSE CYCLES After fill, timer/switch action allows the motor to turn the rotor and disc into BRINING position. W ater flow is directed to the nozzle.
SERVICE TECH INFORMA TION SECTION 5 27 5C. W A TER FLOW THROUGH THE SOFTENER V AL VE F AST RINSE CYCLE .
REP AIR P ARTS SECTION 6 28 KENMORE W A TER SOFTENERS MODEL NOS. 625.348570 AND 625.348590 1 2 3 4 5 6 27 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Rating Decal Location V alve Assembly (see page 30) 28 KEY NO.
REP AIR P ARTS SECTION 6 29 KENMORE W A TER SOFTENERS MODEL NOS. 625.348570 AND 625.348590 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 INLET – OUTLET GROUNDING CLAMPS BRINE V AL VE ASSEMBL Y KEY NO. P ART NUMBER DESCRIPTION 30 7168647 Float Weight, Ceramic 31 0513860 Float Stop 32 7097202 Float (includes key no.
REP AIR P ARTS SECTION 6 30 KENMORE W A TER SOFTENERS MODEL NOS. 625.348570 AND 625.348590 1 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 96 97 98 99 67 68 69 70 71 72 73 74 75 76 77 84 78 79 80.
REP AIR P ARTS SECTION 6 31 KENMORE W A TER SOFTENERS MODEL NOS. 625.348570 AND 625.348590 P ARTS LIST KEY NO. P ART NUMBER DESCRIPTION 50 7131755 Screw , #6-20 x 7/8 (2 req.) 51 7133008 Motor (Includes 2 ea. of Key No. 50) 52 0900857 Screw , #6-20 x 3/8 (2 req.
OWNER’S MANUAL MODEL NOS. 625.348570 625.348590 Deluxe Demand W ater Softeners The model number of your water softener is found on the rating de- cal.
An important point after buying a device Kenmore 625.34859 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenmore 625.34859 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenmore 625.34859 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenmore 625.34859 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenmore 625.34859 will certainly help you make a decision on the purchase.
If you already are a holder of Kenmore 625.34859, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenmore 625.34859.
However, one of the most important roles played by the user manual is to help in solving problems with Kenmore 625.34859. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenmore 625.34859 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
