Instruction/ maintenance manual of the product 580.75051 Kenmore
Go to page of 16
Owner's Manual Manual del Propietario I qt_l q;{€'i'dS,',i f___ t ® ROOM AIR CONDITIONER ACONDICIONADOR DE AIRE Model, Modelo 580.
TABLE OF CONTENTS ........................ 2 WARRANTY .............................................. 2 SAFETY ..................................................... 3 Important Safety Instructions ...................... 3 ELECTRICAL REQUIREMENTS ......
IMPORTANT SAFETY INSTRUCTIONS The safety instructions below will tell you how to use your room air conditioner to avoid harm to yourself or damage to your ROOM AIR CONDITIONER. _FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
Power cord may include a current interrupter device. Atest andreset button is provided on the plug case. The device should be tested on a periodic basis byfirst pressing the TEST button and then the RESET button.
INSTALLATION REQUIREMENTS Your air conditioner will install into standard double hung windows with actual clear opening widths of 22 to 36 inches (558mm to 914mm) (FIG. 1). Lower sash must open sufficiently to allow a clear vertical opening of 14 inches (356mm).
INSTALLATION Pick a location which will allow you to blow the cold air into the area you want. Windows used for installation must be strong enough to support the weight of the air conditioner. Good installationwith special attention to the proper position of the unit will lessen the chance that service will be needed.
_ INSTALL THE AIR CONDITIONER IN THE WINDOW • Carefully lift the air conditioner and slide it into the open window. Make sure the bottom guide of the air conditioner drops into the notches of the L brackets. • When the air conditioner drops into the L brackets, the air conditioner will be centered in window opening as shown in FIG.
HOW AND WHY Your room air conditioner provides the following functions to make hot weather living more comfortable: • Cools and circulates room air. • Lowers humidity by removing excess moisture. • Filters out summertime dust, dirt, and some airborne impurities.
FEATURES 7 1 FIG. 13 USING THE AIR CONDITIONER _To reduce the risk of fire, electric shock, or injury to persons, read the important SAFETY instructions section before operating this appliance. To begin operating the air conditioner after installation, follow these steps: 1.
DISPLAY V TEMP A "--- ENERGY SAVER O I FAN 0 MODE COOL 0 TIMER ON/OFF FAN SPEED HI/LO REMOTE CONTROL SIGNAL RECEIVER TEMPERATURE SETTING • Use this button to automatically control the temperature of the room. The temperature can be set within a range of 60°F to 86°F by increments of I°F.
REMOTE CONTROL Note: The Remote Controller will not operate properly if strong light shines on the sensor window of the Air Conditioner or if there are obstacles between the Remote Control and the Air Conditioner. Every time you push button, you will hear a beep from the Air Conditioner.
HOW TO INSERT BATTERIES INTO REMOTE CONTROL 1. Remove the cover from the back of the remote controller. ° Open the cover according to the arrow direction on the cover. 2. Insert two batteries. ° Be sure that the (+) and (-) directions are correct. ° Be sure that both batteries are new.
AIR FILTER CLEANING The Air Filter will become dirty as it removes dust from the inside air. It should be washed at least every 2 weeks. If the Air Filter remains full of dust, the air flow will decrease and the cooling capacity will be reduced, possibly damaging the unit.
BEFORE CALLING FOR SERVICE Check the following list to be sure a service call is really necessary. A quick reference to this manual may help you avoid an unneeded service call. THE AIR CONDITIONER WILL NOT OPERATE. Check if... Then... Wall plug disconnected.
Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmore ® product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time.
iiiiiiiiiiiiiiiiiiiii ¸¸ iiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiii.
An important point after buying a device Kenmore 580.75051 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenmore 580.75051 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenmore 580.75051 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenmore 580.75051 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenmore 580.75051 will certainly help you make a decision on the purchase.
If you already are a holder of Kenmore 580.75051, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenmore 580.75051.
However, one of the most important roles played by the user manual is to help in solving problems with Kenmore 580.75051. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenmore 580.75051 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
