Instruction/ maintenance manual of the product 5303304549 Kenmore
Go to page of 20
5303304549 I_ MP_4UFk Recycled Paner Read and Save These Instructions Pi%-_ 208283-1010 Rev !.
Kenmore Electric Range Thank you for choosing this appliance, The information contained within this Owner's Guide will instruct you on how to properly operate and care for your range. The Cooking Guidewill help you to receive favorable results during cooking and baking.
BMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this appliance. This guide contains important safety symbols and instructions Please pay special attention to these symbols and follow .
gMPORTANT SAFETY iMPORTANT INSTRUCTIONS FOR USING YOUR COOKTOP - Know which knob controls each surface etement_ Use Proper Pan Size---This appliance is equipped with surface elements of different sizes, Select utensils having flat bottoms large enough to cover the surface element.
FEATURES 16 17A 17B 18 1 Model and Seria! Numbers 2 Surface Unit Controls 3 Surface Unit's Indicator Light 4 Oven Control 5 Right Oven Temp Control 6 Left Oven Temp Control 7 Right Oven Indicator Light 8 Left Oven Indicator Light 9 Automatic Oven Timer Clock and Minute Timer 11 Oven Cleaning Light 12 Plug-In Surface Unit, (Z) 6 in.
Setting the Clock Minute Timer (som models) When the range is first plugged in, or when the power supply to the range i disconnected, "O0:O0" is displayed in the display window To Set the Clock t. Turn the set knob counter clockwise until the control beeps once and the wor( TIME is displayed in the lower left corner of the display.
Before Setting Oven Controls Oven Vent Locatii_n The oven is vented through the center of the left rear element for the left oven and the center of the right tea r element for the right oven When an o.
Setting Oven Controls (continued) 1. Push in and turn the griddle control in either direction to the desired setting Start most cooking operations on a higher setting; then turn to a lower setting to finish cooking 2. The controls do not have to be set exactly on a particular mark Use the marks as a guide and adjust the control as needed 3.
Setting Oven Controls (continued) Broiler Grid Br_iter Broil Stop Position Broil Stop Position Broiling Broiling is a quick method of cooking foods by direct heat under the upper broil element of the .
Oven Cleaning (cleaning the porcelain ename! oven) Small Oven is a Porcelain Enamel Oven--A General Description Porcelain has a smooth finish and is a type of glass fused to metal. With porcelain, commercial oven cleaners can be used on aEl interior surfaces.
Oven Cleaning (self-cleaning instructions) _During the self-cleaning cycle, the outside of thelange can become very hot to the touch_ DO NOT leave smalt children unattended nearthe appliance., DO NOT line the oven walls, racks or bottom with aluminum foil.
Oven Cleaning (self-cleaning instructions, continued) l Be sure to remove ever_hing from the oven and complete the suggested precteaning steps before setting the controls.
General Cleaning Be careful not to bend terminal ends when replacing elements after cleaning the drip bowls Surface Elements and Drip Bowls Surface elements can be unplugged and removed to make clea.
General Cleaning (continued) Cleaning Various Parts of Your Range Before cleaning any part of the range, be sure all controls are turned OFF and the range is COOL, Remove spitfovers and stains as soon.
Oven Light Be sure the range is unplugged and all parts are COOL before replacing the oven light,, - Wire Holder Glass Shield The oven light automatically turns on when the door is opened (some models) Use the switch (some models) located on the control panel to turn the light on when the door is closed.
Anti-Tip Brackets Installation Instructions Important Safety Warning To reduce the risk of tipping of the range, the range must be secured to the floor by properly installed anti-tip brackets and scre.
Avoid Service Checklist Before you calf for service, review this list It may save you time and expense The list includes common occurrences that a re not the result of defective workmanship or materials in this appliance OCCURRENCE I N STALLATtON Range is not level.
OCCURRENCE SURFACE ELEMENTS (continued) Surface element does not heat_ POSSIBLE CAUSE SOLUTION No power to appliance Check/reset circuit breaker or replace fuse If the problem is a circuit overload, h.
OCCURRENCE POSSIBLE CAUSE SOLUTION SELF-CLEANING INSTRUCTIONS Self-cleaning cycle does not work. Controls not set properly Follow instructions under Oven Cleaning (self-cleaning instructions).
Dear Customer: | Our constant efforts are | directed toward making | sure your new Kenmore ! t Range will arrive at your ' t home in perfect condi- tion and will give you i ! proper performance, .
An important point after buying a device Kenmore 5303304549 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenmore 5303304549 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenmore 5303304549 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenmore 5303304549 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenmore 5303304549 will certainly help you make a decision on the purchase.
If you already are a holder of Kenmore 5303304549, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenmore 5303304549.
However, one of the most important roles played by the user manual is to help in solving problems with Kenmore 5303304549. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenmore 5303304549 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
