Instruction/ maintenance manual of the product 41003 Kenmore
Go to page of 50
SIDE-BY-SIDE REFRIGERATOR REFRIGERADOR DE DOS PUERTAS Models/Modelos 41002, 41003, 41009 DA99-01746C Printed in Korea Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.
English Version Spanish Version Warranty Protection Agreements Important Safety Instructions CFC Refrigerant Disposal Grounding Requirements Parts and Features Refrigerator Installation Getting Ready .
REFRIGERATOR WARRANTY f Kenmore Elite TM Limited Warranty When installed, operated, and maintained according to all instructions supplied with the product, if any non- expendable part of this applianc.
Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmore ® product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time.
BASIC SAFETY PRECAUTIONS This guide contains many important safety messages. Always read and obey all safety messages. This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill or hurt you or others, or cause damage to the product.
• DO NOT install the refrigerator in a damp place or place where it may come in contact with water. Wet and/or deteriorated insulation of the internal electrical parts may cause electric shock or fire. • DO NOT store volatile or flammable substances in the refrigerator.
• If you have a long vacation planned, empty the refrigerator and turn it off. Wipe excess moisture from the inside and leave the doors open to keep odor and mold from developing.
I Use this section to become more familiar with the parts and features. Page references are included for your convenience. NOTE: The refrigerator you have purchased may have some or all of the items listed below. OAuto Door Closer (p. 41) OWater Filter (p.
GETTING READY TO INSTALL THE REFRIGERATOR Congratulations on your purchase of the Kenmore Elite TM Side-By-Side Refrigerator. We hope you enjoy the many state-of-the-art features and efficiencies that this new appliance offers. Selecting the best location for the refrigerator.
Excessive Weight Hazard Use two or more people to move and install the refrigerator. Failure to do so can result in back or other injury. UNPACKING YOUR REFRIGERATOR Remove tape and any temporary labels from the refrigerator before using.
REFRIGERATOR AND FREEZER DOOR REMOVAL AND INSTALLATION If the refrigerator is too large to pass through your doorway easily, you can remove the refrigerator and freezer doors. I. Open the refrigerator and freezer door. Remove the 3 screws (1) and the front leg cover (2) from the front- bottom of the refrigerator.
To remove the refrigerator door: Support the door during upper hinge removal to prevent possible personal injury and/or product damage from a falling, unsupported door. 8. Remove the ground screw (12) and disconnect the refrigerator ground wire (21). Remove the remaining 3 hinge screws (14) and the upper hinge (22) from the top of the refrigerator.
CONNECTING THE WATER SUPPLY LINE TO THE REFRIGERATOR There are several items that you need to purchase to complete this connection. You may find these items sold as a kit at your local hardware store. • 1/4" compression nut • copper tubing • ferrule 1.
Remove any residual matter inside the water supply line after installing the water filter. 1. Plug the refrigerator's power cord into a 3-prong grounded outlet. 2. . J Turn ON the main water supply and turn ON the valve to the water supply line. Flush 3 gallons (11.
POSITIONING AND LEVELING THE REFRIGERATOR Now that the refrigerator has been assembled and connected to a water supply source, position and level the the refrigerator. The refrigerator has three front leveling legs--one on the right, one on the left, and one in the middle.
MAKING MINOR DOOR ADJUSTMENTS Remember, a level refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the refrigerator. When the freezer door is higher than the refrigerator door, adjust the refrigerator leg to level the two doors.
DIGITAL PANEL The digital panel on the freezer door is a Graphic User Interface (GUI). This panel with LCD screen provides an easy-access interface for the user. The touch screen allows the user to access all display functions, including an interactive message board system.
Calibrating the Stylus Touch Point The stylus touch point can be calibrated to best meet the user's needs. To adjust the stylus touch point on the touch screen: 1. Press the Settings button on the "Home" screen. The display will show the adjustable settings on the screen.
Using Slide Show When Slide Show is selected, it shows the slides that are saved in an electronic photo album. See page 33 for instructions on setting up a slide show. If slides are not selected from the photo album, the screen will show a Kenmore Elite TM default slide.
Dispenser Controls The last three buttons on the control panel control the dispenser functions. These buttons include Accent Lighting around the dispenser (1), Ice Type/Ice Off (2), and Water dispensing (3).
Selecting and Dispensing Water 1. Press the Water button. The screen will show "Dispenser Active Water." Home I Child I ceType Slide Sho_ I Accer Lightir 2. Place glass in dispenser to dispense refrigerated water. NOTES: • The dispenser always defaults to the last setting that was used (Water or Ice).
3. Choose the desired date to input a calendar memo. A blank memo pad will show on the screen for that day. iiiiiiiiiiiii NOTES: • Today is highlighted in blue. • Special days are highlighted in green. • Calendar memos are highlighted in orange.
How to Enter a New Special Day 1. Press the Home button. The display screen will show the "Home" screen. Sde i Show Accenf g Lighting Wetter J 2. Touch the Today button on the touch screen. The screen will show the "Calendar" screen.
. To set an alarm time, touch the set time button on the screen. Using the < and > buttons, set the time in hours and minutes when you would like the alarm to sound. Touch the OK button to enter the alarm time. 3. Choose the desired date to change a calendar memo or special day.
. If you want to change or select a repeat for your memo or special day, touch the Repeat button on the screen. This enables you to choose the repetition period (daily/weekly/monthly/yearly). NOTE: The yearly button maintains and repeats the information for 10 years.
, Touch the OK button to complete deleting the memo or special day. Calendar Memo Alarm The calendar alarm is designed to remind you there is a calendar memo or special day event for that day. At the scheduled time, the calendar alarm will sound and the "Check Calendar Memo" screen will appear on the screen.
Temp Control The temperature control allows you to set the freezer and the refrigerator temperatures. Use the following instructions to change and set these temperatures. 1. Press the Home button. The display screen will show the "Home" screen.
About the Automatic Icemaker Ice is made in the automatic icemaker and sent to the dispenser. The automatic icemaker is designed to make ice cubes 24-hours per day. The quantity will vary depending on the freezer compartment temperature, room temperature, number of door openings, freezer load, and other operating conditions.
Setting Fast Freeze or Rapid Cool The Fast Freeze and Rapid Cool functions can be used to quickly lower the temperature of the freezer and refrigerator compartments. These buttons are found on the "Temp Control" touch screen. Use the following instructions to activate these functions.
The filter needs replacement immediately: 4. When the replacement is done, touch the OK button at the bottom of the screen. The display screen will show the "Home" screen. 3. If the status reads "Order" or "Replace," touch the Replace button on the bottom of the screen to access the replacement instructions.
Photo Album Save photos you shot yourself or images you want and make your own slide show. When the memory card is inserted, the photo album is automatically run. Uploading Images 1. Pull out the cover over the card slot and move it to the side. 2. Insert the memory card (SD/SDHC/MMC/HS MMC) with images saved into the card slot.
. • If the External Album button below the photo album images is touched, the screen will go back to the "What do you want to do?" screen. NOTE: This product uses parts of the software from the independent JPEG Group. The screen displays "Uploading Selected Image(s)" while the images are uploading from the memory card.
Setting Up a Slide Show From the Photo Album 1. Press the Home button. The display screen will show the "Home" screen. 2. Touch the Photo Album button on the touch screen. The images in the photo album will appear on the screen. . Select images to be used in the Slide Show; then touch the Save Play Slide Show button.
Setting Up a Slide Show from an External Card 1. Insert the memory card (SD/SDHC/MMC/HS MMC) with the saved images in the card slot at the bottom of the screen. "What do you want to do?" will be displayed on the screen. 4. Touch the OK button to save the slide show as it is.
Message The message feature allows you to leave handwritten or typed messages on the screen for yourself or someone else. Leaving a new message 1. Press the Home button. The display screen will show the "Home" screen. Slide Show -_ Ceol_ng off HO_,C Accent _1 Lighting Water 2.
Changing a message 1. Press the Home button. The display screen will show the "Home" screen. l Slide Show =1 I :ool_ng ¢ .a o,sr, Accent J Lighting I Water 2. Touch the Message button in the center bottom of the touch screen. The "Message" screen will appear.
Deleting a message (cont.) 4. Touch the Delete button under the message screen. The "Delete Message?" screen will appear. 5. Touch the OK button to delete the message.
. After "Energy Saver Deactivated" is displayed on the screen, the settings screen will display the Energy Saver Off button, indicating the energy saver function is OFE NOTE: The Energy Saver button shows the current set condition. . Touch the Brightness button in the upper-right corner of the touch screen.
How to set the screen saver. If the screen saver is left on for extended periods, it is a good idea to set the slide show at the photo album as the screen saver. 1. Press the Home button. The display screen will show the "Home" screen. . Slide Show I Cool_,_ o .
How to set the volume control. You can control the volume of the alert sounds. 1. Press the Home button. The display screen will show the "Home" screen. 2. Touch the Settings button in the lower-right corner of the touch screen. The "Settings" selection screen will appear.
STORING FOOD IN THE REFRIGERATOR The Kenmore Elite TM Side-By-Side Refrigerator has been designed with features and functions that maximize space saving. The following customized compartments help keep your food fresher longer. In order to further prevent odor from seeping into the ice, securely wrap stored foods as airtight as possible.
REMOVING THE REFRIGERATOR/ FREEZER ACCESSORIES The Kenmore Elite TM Side-By-Side Refrigerator accessories can be easily removed and/or rearranged to maximize the use of interior space and provide ease of cleaning. Before removing any accessories, remove all food from the accessory being removed.
Drawers/Crispers (cont.) To remove and replace a drawer cover: Ice Bucket (Freezer) To remove and replace: Do not use excessive force when removing a drawer cover. Forced drawer covers can break and/or cause personal injury. , 2. , Remove all the drawers as described on page 41.
CLEANING THE REFRIGERATOR Caring for your Kenmore Elite TM Side-By-Side Refrigerator prolongs the life of your appliance and helps keep it odor- and germ-free. Do not use benzene, thinner, or bleach for cleaning. They could cause a fire or damage the surface of the appliance.
Cleaning Behind the Refrigerator Electric Shock Hazard Do not remove the back cover. Doing so could cause an electric shock resulting in death, personal injury, or damage to the appliance. To keep the cords and exposed parts free of dust and dirt accumulation, vacuum behind the appliance once or twice a year.
POWER INTERRUPTIONS 1. If the power will be out for 24 hours or less, keep all refrigerator doors closed to help foods stay cold and frozen. 2. If the power will be out for more than 24 hours, remove all frozen food and store it in a frozen food locker.
REFRIGERATOR DOES NOT OPERATE Check if... The power supply cord is unplugged. A household fuse has blown or circuit breaker tripped. Refrigerator is in defrost cycle. Then... Firmly plug the cord into a live outlet with proper voltage. Replace the fuse or reset the circuit breaker.
FRONT CORNERS AND VERTICAL HINGED SURFACES ARE HOT OR HAVE CONDENSATION Check if... Then... Vertical hinged surfaces feel hot. Some heat is normal due to installed anti-condensators. These prevent condensation buildup. Refrigerator door is ajar. Condensation can occur when you leave a door open for a long time.
THE DISPLAY FUNCTIONS DO NOT WORK Check if... Then... The display lock function is set to Locked. Reset the display lock function to Unlocked. The display lock function is set to Unlocked. Push the display reset button with a sharp tool. This initializes the display.
NOTES _., J 50.
An important point after buying a device Kenmore 41003 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenmore 41003 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenmore 41003 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenmore 41003 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenmore 41003 will certainly help you make a decision on the purchase.
If you already are a holder of Kenmore 41003, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenmore 41003.
However, one of the most important roles played by the user manual is to help in solving problems with Kenmore 41003. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenmore 41003 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
